pH敏感性P(AAm-co-AA)半互穿网络水凝胶的制备、表征及溶胀动力学研究

以N,N-亚甲基双丙烯酰胺(N,N-MBA)为交联剂、过硫酸钾(KPS)为引发剂,采用自由基交联共聚法合成了具有pH敏感性的半互穿网络水凝胶聚丙烯酰胺-co-丙烯酸[P(AAm-co-AA)],通过傅立叶红外光谱、差热分析研究了水凝胶的结构及热稳定性.水凝胶的溶胀研究表明,随着缓冲溶液pH值的增大平衡溶胀率增大;在不同...     

Temperature and pH sensitive hydrogels composed of chitosan and poly(ethylene glycol)

Summary Chitosan based semi-interpenetrating polymer network (semi-IPN) hydrogels containing different amounts of poly(ethylene glycol) (PEG) were prepared. The crosslinking of the hydrogels was achieved by using a naturally occurring nontoxic cross-linking agent genipin. The swelling behaviour of these hydrogels was studied by immersing the films in deionized water at 25, 37 and 45 °C and in media of different pHs at 37 °C. Swelling was found to be dependent on temperature, pH of the medium and the amount of PEG in the gel. States of water in the hydrogels swollen in deionized water at 37 °C were determined using Differential Scanning Calorimetry (DSC). The equilibrium water content and the amount of freezing water in the swollen hydrogels increased with the increase in PEG concentration in the gels.     

Studies on preparation and swelling properties of the N-isopropylacrylamide/chitosan semi-IPN and IPN hydrogels

Semi-interpenetrating network (semi-IPN) polymer gels and interpenetrating network (IPN) polymer gels with thermosensitivity were prepared by introducing a biodegradable polymer, chitosan, into the N-isopropyacrylamide (PNIPAAm) gel system. The swelling behavior, temperature sensitivity, pH sensitivity, gel strength, and drug-release behavior of PNIPAAm/chitosan semi-IPN and IPN hydrogels were investigated. The results indicated that the NIPAAm/chitosan semi-IPN and IPN hydrogels exhibited pH and temperature-sensitivity behavior and could slow drug release and diffusion from the gels. From the stress–strain curves of the hydrogels, the compression moduli of IPN gels containing crosslinked chitosan were higher than those of semi-IPN gels. This is because IPN gels have a more compact structure. The morphology of PNIPAAm/chitosan hydrogels was also investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2487–2496, 2001     

Synthesis and Characterization of Temperature-Sensitive Poly(N-isopropylacryamide) Hydrogel with Comonomer and Semi-IPN material

A series of temperature and pH sensitive hydrogels were synthesized using N-isopropylacrylamide (NIPAAm) as main monomer, sodium alginate (SA) as semi-IPN material, ethyl acrylate (EA) and acrylic acid (AA) as comonomer, and N-maleyl chitosan (N-MACH) as cross-linker. The temperature and pH sensitive behavior, swelling/deswelling kinetics of the hydrogels were investigated. And the mechanism of the phase transition was summed up. Sodium alginate/Poly(N-isopropylacryamide) semi-interpenetrating polymer network (SA/PNIPAAm semi-IPN) hydrogels exhibited a lower critical solution temperature (LCST) at about 32 °C with no significant deviation from the conventional PNIPAAm hydrogels. Poly(N-isopropylacryamide-co-ethyl acrylate) (P(NIPAAm-co-EA)) hydrogels exhibited LCST at 29–31°C, increasing the amount of EA in the hydrogel gradually decreased the LCST. Poly(N-isopropylacryamide-co-acrylic acid) [P(NIPAAm-co-AA)] hydrogels exhibited LCST at 34–39°C, with decreasing NIPAAm/AA from 96/4 to 92/8 and 90/10, the LCST increased from 34°C to 37°C and 39°C. In the swelling/deswelling kinetics, all the dried hydrogels exhibited fast swelling/deswelling behavior, which might be attributed to macroporous structures of the hydrogels.     

pH-sensitive hydrogels based on polyvinylpyrrolidone–polyacrylic acid (PVP–PAA) semi-interpenetrating networks (semi-IPN): Swelling and controlled release

Complexes of polyvinylpyrrolidone–polyacrylic acid (PVP–PAA) photopolymerized from a mixture of PVP and acrylic acid (AA) were characterized by means of differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectrometry. The swelling of PVP–PAA semi-interpenetrating network (semi-IPN) films was studied in various pH media. The results showed that swelling in 0.1N HCl solution and pH 3.0 phosphate buffer was strikingly different from that in the pH 6.0 phosphate buffer. Caffeine release rate from the semi-IPN film followed Fick's Law. The rate of release was higher in dissolution media having pH above a critical value of about 3.8. Control of caffeine release from the semi-IPN film was realized by changing cyclically the pH of dissolution medium between 0.1N HCl solution and pH 6.0 phosphate buffer. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 921–930, 1998     

Modification of Na-bentonite by polycations for fabrication of amphoteric semi-IPN nanocomposite hydrogels

Na-bentonite was modified by intercalation of poly(dimethyldiallylammonium chloride) (PDMDAAC). The XRD pattern and TEM image indicated that an exfoliated nanocomposite was obtained. Then, graft polymerization of acrylic acid onto starch was carried out to form an amphoteric nanocomposite hydrogels with semi-interpenetrating polymer networks (semi-IPN) in the dispersion of the nanocomposite. The swelling behavior of the hydrogels was studied in buffer solution at different pH. The amphoteric semi-IPN hydrogels had excellent pH-sensitivity in the range of pH from 2 to 4. The amphoteric semi-IPN hydrogels exhibited excellent compressive strength even at high water content.     

Synthesis and characterization of pH-sensitivity semi-IPN hydrogel based on hydrogen bond between poly(N-vinylpyrrolidone) and poly(acrylic acid)

A novel spherically shaped semi-interpenetrating network (semi-IPN) hydrogel, which is based on hydrogen bond between chemical crosslinked poly(N-vinylpyrrolidone) (PVP) and linear poly(acrylic acid) (PAA), was prepared. The semi-IPN hydrogel was synthesized by three steps: (1) linear PAA with different molecular weights were obtained by a reaction of free radical polymerization used 2,2′-azo-bis-iso-butyronitrile (AIBN) as an initiator; (2) crosslinked PVP bead was obtained by a reaction of N-vinylpyrrolidone with AIBN used as an initiator and N,N′-methylene-bis-acrylamide (NNMBA) used as a crosslinker by the way of suspension polymerization; (3) complexation occurred between suitable amount of aqueous solution of PAA and the porous PVP bead and was stabilized by multiple frost-defrost, from this step the semi-IPN hydrogel was obtained. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) proved the presence of the hydrogen bond in the hydrogel. The swelling behaviour of the hydrogel was studied in buffer solution with different pH and NaCl aqueous solution. The results showed that the semi-IPN hydrogel had excellent pH-sensitivity in the range of pH from 2.25 to 4.00 and the small molecule salt had little influence on the swelling behaviour of the semi-IPN hydrogel over the range of concentration of NaCl aqueous solution investigated. The results were confirmed further by scanning electron microscope (SEM). The mechanism of swelling and deswelling was discussed.     

Network parameters and volume phase transition behavior of poly(N‐isopropylacrylamide) hydrogels

Thermosensitive hydrogels were prepared by free radical polymerization in aqueous solution from N‐isopropylacrylamide (NIPA) monomer and N,N‐methylenebis(acrylamide) (MBAAm) crosslinker. The swelling equilibrium of the hydrogels in deionized water was investigated as a function of temperature and MBAAm content. The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the amount of MBAAm content. The average molecular mass between crosslinks and polymer–solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. The swelling equilibrium of the hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In deionized water, the hydrogels showed a discontinuous volume phase transition at 32°C. In SDS and DTAB solutions, the equilibrium swelling ratio and the volume phase transition temperature (lower critical solution temperature) of the hydrogels increased, which is ascribed to the conversion of nonionic PNIPA hydrogel into polyelectrolyte hydrogels because of binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method; it was found that the electric conductivity of the PNIPA–surfactant systems depended strongly on both the type and concentration of surfactant solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1756–1762, 2006     

Poly(γ-glutamic acid) hydrogel prepared from microbial poly(γ-glutamic acid) and alkanediamine with water-soluble carbodiimide

Poly(γ-glutamic acid) (PGA) hydrogels have been prepared from microbial PGA produced by Bacillus subtilis F-02-1, water-soluble carbodiimide (WSC), and alkanediamines such as 1,3-propanediamine (1,3-PD), 1,4-butanediamine (1,4-BD), and 1,6-hexanediamine (1,6-HD) in aqueous medium. The carboxyl groups of PGA were activated by the addition of WSC in deionized water, and the PGA-WSC adduct was produced. PGA hydrogels could be produced after the mixing of PGA-WSC and alkanediamine in deionized water. This alkanediamine to which both amino groups reacted with the carboxyl groups of PGA plays the role of a crosslinking point. When the amount of PGA was 100 mg, WSC was 50 mg or more, and 1,3-PD was 25 μL or more in 2 mL of deionized water, PGA hydrogels could be produced. Specific water contents (weight of absorbed water/weight of dry gel) ranged from 300 to 1,993 g/g in the case of 1,3-PD. If the PGA-WSC adduct was freeze-dried, the yield of the PGA hydrogel became higher than that when PGA-WSC was not freeze-dried. The highest yield of the PGA hydrogel from 100 mg of PGA, 100 mg of WSC, and 100 μL of 1,3-PD in 2 mL of deionized water using the freeze-dry method was 39.9 mg of dry PGA hydrogel with a 650 g/g specific water content. The order of yield was 1,6-HD > 1,4-BD > 1,3-PD from 100 mg of PGA-100 mg of WSC in 2 mL of deionized water. The order of the specific water content was 1,3-PD (462 g/g) > 1,4-BD (234 g/g) > 1,6-HD (199 g/g). This order may be due to the higher reaction probability between the activated carboxyl groups in the PGA-WSC and both amino groups in the alkanediamine with longer methylene chains, indicating that the crosslinking density of the PGA hydrogel is higher and the specific water content is lower. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 1889–1896, 1997     

The swelling behaviors and network parameters of cationic starch‐g‐acrylic acid/poly(dimethyldiallylammonium chloride) semi‐interpenetrating polymer networks hydrogels

Amphiphilic semi‐interpenetrating polymer networks (semi‐IPN) hydrogels were prepared by a sequential‐IPN method by acrylic acid graft copolymerization into cationic starch in mild aqueous media of poly(dimethyldiallylammonium chloride). Some main factors were investigated to evaluate the swelling of hydrogels, and the network parameters M_c were given accordingly to elaborate the interaction between polymers. The chemical structure of the resulting hydrogel was confirmed using Fourier transform infrared spectroscopy. The cationic starch‐based semi‐IPN hydrogels achieved a high swelling capacity of 1070 g/g in deionized water and 94 g/g in 0.9 wt % NaCl solution, respectively) and high compressive stress in a high water content. Besides, a different pH‐dependent behavior was found for this semi‐IPN hydrogel. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and Characterization Superabsorbent Polymers Made of Starch,Acrylic Acid,Acrylamide, Poly(Vinyl Alcohol), 2-Hydroxyethyl Methacrylate, 2-Acrylamido-2-methylpropane Sulfonic Acid

Three polymers with excellent absorption properties were synthesized by graft polymerization: soluble starch-g-poly(acrylic acid-co-2-hydroxyethyl methacrylate), poly(vinyl alcohol)/potato starch-g-poly(acrylic acid-co-acrylamide), poly(vinyl alcohol)/potato starch-g-poly(acrylic acid-co-acrylamide-co-2-acrylamido-2-methylpropane sulfonic acid). Ammonium persulfate and potassium persulfate were used as initiators, while N,N′-methylenebisacrylamide was used as the crosslinking agent. The molecular structure of potato and soluble starch grafted by synthetic polymers was characterized by means of Fourier Transform Infrared Spectroscopy (FTIR). The morphology of the resulting materials was studied using a scanning electron microscope (SEM). Thermal stability was tested by thermogravimetric measurements. The absorption properties of the obtained biopolymers were tested in deionized water, sodium chroma solutions of various concentrations and in buffer solutions of various pH.     

Poly(vinyl alcohol) Based pH Responsive Semi-IPN Hydrogels: A Comparative Swelling Investigation

The semi-interpenetrating polymer network (IPN) hydrogels composed of poly(vinyl alcohol) (PVA) and random copolymers of poly(acrylamide-co-sodium methacrylate), poly(AAm-co-NMA); poly(acrylamide-co-potassium methacrylate), poly(AAm-co-KMA); poly(acrylamide-co-maleic acid), poly(AAm-co-MA) were prepared by conventional co-polymerization employing ammonium persulphate (APS)/N,N,N¹,N¹-tetraethylmethylenediamine (TMEDA) as redox initiating system in presence of N,N¹-methylenebisacrylamide (MBA) as a crosslinker. The swelling behavior of these semi-IPN hydrogels were compared in detail in various swelling media, including different pH, salt, and biological fluids.     

Swelling Properties of Chemically Crosslinked Poly(acrylamide-co-maleic acid) Hydrogels

ABSTRACT

Chemically crosslinked poly(acrylamide-co-maleic acid) [poly(AAm-co-MA)] hydrogels were prepared by simultaneous free radical copolymerization of acrylamide (AAm) with maleic acid (MA) in presence of di or tri functional crosslinking agents using ammonium persulfate-N,N,N′,N′-tetramethylethylenediamine (APS-TMEDA) redox-initiating system. The poly(AAm-co-MA) hydrogels formation was confirmed by IR studies. The influence of crosslinkers such as N,N′-methylene-bis-acrylamide (MBA) and 2,4,6-triallyloxy-1,3,5-triazine (TATA) on swelling/de-swelling characteristics were studied in detail for poly(AAm-co-MA) hydrogels containing different amounts of maleic acid. The present investigation also deals with the influence of concentration of crosslinker and initiator on the swelling behavior of poly(AAM-co-MA) hydrogels. The effect of various salts on swelling capacity was studied. In addition, the effect of simulated biological fluids and pH solutions on the swelling of hydrogels was also studied in detail.     

Calcium ion‐induced self‐healing pattern of chemically crosslinked poly(acrylic acid) hydrogels

Poly(acrylic acid) hydrogels crosslinked with N,N′‐methylenebisacrylamide were synthesized by free radical polymerization. Polymerization conditions had a significant influence over the gel content and swelling behaviour of the hydrogels. The incorporation of calcium ions led to the origin of a self‐healing feature. The self‐healing behaviour and mechanical performance of the hydrogels were systematically investigated. The hydrogels showed good tensile strength of 1 MPa and excellent stretchable behaviour where hydrogels regained instantaneously. Hydrogel pieces joined together to become an integrated matrix as soon as two cut pieces were brought in contact. The hydrogels possessed a marked healing efficiency of 97% within 6 h at room temperature without any external intervention. The results are explained in terms of the dynamic mobility of calcium ions within the dual‐crosslinked networks of the poly(acrylic acid) hydrogels. © 2017 Society of Chemical Industry     

Swelling,thermal stability,antibacterial properties enhancement on composite hydrogel synthesized by chitosan-acrylic acid and ZnO nanowires

ABSTRACT

A series of antibacterial superabsorbents containing zinc oxide nanowires (ZnO NWs) based on chitosan (CS) and acrylic acid (AA) were prepared by one-step synthesis. Antibacterial influence of the content with ZnO NWs complex in superabsorbents on Escherichia coli and Staphylococcus aureus was studied, as well as water absorbency, swelling behavior, and thermal stability. Results showed that water absorbency for CS-co-AA composite hydrogel in water was 1000 g/g, because of the presence of ZnO NWs within CS-co-AA hydrogel facilitated the water absorbency ability. Furthermore, results also showed that the antibacterial effect of CS-co-AA composite hydrogels increased with an increase of ZnO NWs content.     

Heterogeneous and homogeneous structure dextran–poly(methacrylic acid) interpenetrating network hydrogels: synthesis and an application study

pH‐sensitive dextran–poly(methacrylic acid) (Dext–pMeAc) full interpenetrating network hydrogels (INHs) were prepared by simultaneous radical polymerization of methacrylic acid monomer (MeAc) and Dext polymer chains in the presence of N,N‐methylenebisacrylamide (MBA) as crosslinker in aqueous solution. These hydrogels were investigated as a drug carrier. The influence of MeAc and MBA contents in the network hydrogels on the swelling behaviour and mechanical strength of prepared Dext–pMeAc INHs was evaluated. Dext–pMeAc INHs were characterized by Fourier transform IR spectroscopy, and kinetic swelling measurements were carried out in deionized water and in simulated gastric fluids (pH 1.1 and pH 7.4). Dext–pMeAc/1‐1, Dext–pMeAc/3‐1 and Dext–pMeAc/5‐1 hydrogels with molar ratios of n_Dext/n_MeAc = 10 and n_MBA/n_Dext = 10, 30 and 50 respectively showed a core–shell structure when they swelled. This phenomenon was not observed in Dext–pMeAc/5‐2, Dext–pMeAc/5‐3 and Dext–pMeAc/5‐5 hydrogels containing a higher amount of Dext in the gels. The swelling data proved the formation of INHs with pH‐sensitive behaviour. A drug release study was performed using Rhodamine 6G fluorescent dye as a model hydrophilic bioactive molecule. The in vitro release rate of Rhodamine 6G from Dext–pMeAc/5‐3 hydrogel was dependent on the pH of the release medium. Copyright © 2012 Society of Chemical Industry     

Bio-hybrid acrylic hydrogels containing metronidazole – loaded poly(acrylic acid-co-methyl methacrylate) nanoparticles and Aloe vera as natural healing agent

Abstract

In this work we present the preparation route of acrylic hydrogels containing metronidazole – loaded poly(acrylic acid-co-methyl methacrylate) micro- and nanoparticles and Aloe vera. In these bio-hybrid materials the bactericidal activity of metronidazole will allow considerably better treatment of infections and Aloe vera will moisturize the skin and accelerate the regeneration processes. The structure of the prepared hydrogels was analyzed using FT-IR, whereby the surface morphology was characterized using SEM – EDS. The obtained materials were studied for swelling behavior and biological properties in water and simulated body fluids. Moreover, the thermal stability was ascertained using TG and DSC.     

One Step e-Beam Radiation Cross-Linking of Quaternary Hydrogels Dressings Based on Chitosan-Poly(Vinyl-Pyrrolidone)-Poly(Ethylene Glycol)-Poly(Acrylic Acid)

We report on the successful preparation of wet dressings hydrogels based on Chitosan-Poly(N-Vinyl-Pyrrolidone)-Poly(ethylene glycol)-Poly(acrylic acid) and Poly(ethylene oxide) by e-beam cross-linking in weakly acidic media, to be used for rapid healing and pain release of infected skin wounds. The structure and compositions of hydrogels investigated according to sol-gel and swelling studies, network parameters, as well as FTIR and XPS analyses showed the efficient interaction of the hydrogel components upon irradiation, maintaining the bonding environment while the cross-linking degree increasing with the irradiation dose and the formation of a structure with the mesh size in the range 11–67 nm. Hydrogels with gel fraction above 85% and the best swelling properties in different pH solutions were obtained for hydrogels produced with 15 kGy. The hydrogels are stable in the simulated physiological condition of an infected wound and show appropriate moisture retention capability and the water vapor transmission rate up to 272.67 g m⁻² day⁻¹, to ensure fast healing. The hydrogels proved to have a significant loading capacity of ibuprofen (IBU), being able to incorporate a therapeutic dose for the treatment of severe pains. Simultaneously, IBU was released up to 25% in the first 2h, having a release maximum after 8 h.     

温度及pH敏感生物水凝胶的研究

运用互穿网络技术,合成了具有温敏性的聚(N 异丙基丙烯酰胺)(PNIPAm)和生物大分子明胶(gelatin)的互穿网络聚合物(PNIPAm/Gelatinsemi IPN和PNIPAm/GelatinIPN)水凝胶,该水凝胶的最低临界溶液温度(LCST)与PNIPAm水凝胶的LCST基本相同,均为33℃左右,但在LCST以下的平衡溶胀率减小、相变区域略微变宽。在此基础上,通过N 异丙基丙烯酰胺(NIPAm)与丙烯酸(AAc)交联共聚,改变了水凝胶的LCST,在pH=4 0的缓冲溶液中,各水凝胶的溶胀行为基本一致,与AAc含量无关,LCST都为28℃左右;在pH>4 0的缓冲溶液中,LCST随AAc组分含量的增加而增加,但温敏性减小。同时,AAc的加入,使水凝胶具有pH敏感性,敏感点为pH=4 5左右。还考察了该水凝胶降解的特点:戊二醛(GA)交联后的明胶网络,保留了明胶的生物降解性,但互穿网络水凝胶在实验条件下几乎未被胃蛋白酶和胰蛋白酶降解,在pH=9 6的碱性条件下,水凝胶可发生化学降解。     

Synthesis and properties of hydrogels of poly(acrylic‐co‐acroloyl β‐cyclodextrin)

Novel acrylic monomers (β‐CD‐A and β‐CD‐6‐EA) containing β‐cyclodextrin (β‐CD) with different extent of substitution were prepared by using dicyclohexylcarbodiimide (DCC) as a condensation agent at room temperature. Two kinds of functional hydrogels were also synthesized by copolymerization of β‐CD‐A and β‐CD‐6‐EA with acrylic acid (AAc) using a redox initiator system in aqueous solution. The nuclear magnetic resonance (¹H NMR), infrared spectroscopy (IR), thermogravimetric analysis (TGA) were employed to character the molecular structures of β‐CD modified monomers and their copolymers. The swelling experiments indicate that the hydrogels with different equilibrium swelling ratio (ESR) possess obvious pH‐sensitivity and distinct dynamic swelling behavior. Using an anti‐cancer drug, chlorambucil (CHL), able to form complexes with β‐CD in water, as a model compound, the controlled drug release behaviors of these hydrogels were investigated. The release behavior of CHL from two kinds of hydrogels synthesized reveals that the release rate of CHL can be effectively controlled by pH values, cross‐linking density, and β‐CD content. In addition, it is found that the β‐CD with the proper frame and concentration can increase release efficiency of CHL from the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009