Targeted Delivery of Drugs and Genes Using Polymer Nanocarriers for Cancer Therapy

Cancer is one of the primary causes of worldwide human deaths. Most cancer patients receive chemotherapy and radiotherapy, but these treatments are usually only partially efficacious and lead to a variety of serious side effects. Therefore, it is necessary to develop new therapeutic strategies. The emergence of nanotechnology has had a profound impact on general clinical treatment. The application of nanotechnology has facilitated the development of nano-drug delivery systems (NDDSs) that are highly tumor selective and allow for the slow release of active anticancer drugs. In recent years, vehicles such as liposomes, dendrimers and polymer nanomaterials have been considered promising carriers for tumor-specific drug delivery, reducing toxicity and improving biocompatibility. Among them, polymer nanoparticles (NPs) are one of the most innovative methods of non-invasive drug delivery. Here, we review the application of polymer NPs in drug delivery, gene therapy, and early diagnostics for cancer therapy.     

Graphene and graphene oxide and their uses in barrier polymers

Currently, there is great interest in graphene‐based devices and applications because graphene has unique electronic and material properties, which can lead to enhanced material performance. Graphene may be used in a wide variety of potential applications from next‐generation transistors to lightweight and high‐strength polymeric composite materials. Graphene, which has atomic thickness and two‐dimensional sizes in the tens of micrometer range or larger, has also been considered a promising nanomaterial in gas‐ or liquid‐barrier applications because perfect graphene sheets do not allow diffusion of small gases or liquids through its plane. Recent molecular simulations and experiments have demonstrated that graphene and its derivatives can be used for barrier applications. In general, graphene and its derivatives can be applied via two major routes for barrier polymer applications. One is the transfer or coating of few‐layered, ultrathin graphene and its derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), on polymeric substrates. The other is the incorporation of fully exfoliated GO or rGO nanosheets into the polymeric matrix. In this article, we review the state‐of‐the‐art research on the use of graphene, GO, and rGO for barrier applications, including few‐layered graphene or its derivatives in coated polymeric films and polymer nanocomposites consisting of chemically exfoliated GO and rGO nanosheets, and their gas‐barrier properties. As compared to other nanomaterials being used for barrier applications, the advantages and current limitations are discussed to highlight challenging issues for future research and the potential applications of graphene/polymer, GO/polymer, and rGO/polymer composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39628.     

Melanin-Like Nanomedicine in Photothermal Therapy Applications

Photothermal therapy (PTT) mediated by nanomaterial has become an attractive tumor treatment method due to its obvious advantages. Among various nanomaterials, melanin-like nanoparticles with nature biocompatibility and photothermal conversion properties have attracted more and more attention. Melanin is a natural biological macromolecule widely distributed in the body and displays many fascinating physicochemical properties such as excellent biocompatibility and prominent photothermal conversion ability. Due to the similar properties, Melanin-like nanoparticles have been extensively studied and become promising candidates for clinical application. In this review, we give a comprehensive introduction to the recent advancements of melanin-like nanoparticles in the field of photothermal therapy in the past decade. In this review, the synthesis pathway, internal mechanism and basic physical and chemical properties of melanin-like nanomaterials are systematically classified and evaluated. It also summarizes the application of melanin-like nanoparticles in bioimaging and tumor photothermal therapy (PTT)in detail and discussed the challenges they faced in clinical translation rationally. Overall, melanin-like nanoparticles still have significant room for development in the field of biomedicine and are expected to applied in clinical PTT in the future.     

Advancements in MXene-Polymer composites for various biomedical applications

2D materials have brought about significant technological advancements in the field of biomaterials. ‘MXene’, a ceramic-based 2D nanomaterial, is comprised of transition metal carbides, nitrides, and carbonitrides having a planar structure educed from a ceramic ‘MAX’ phase by etching out ‘A’ from it, has emerged to surpass drawbacks of conventional biomaterials. In spite of their substantial properties like large surface area, biocompatibility, hydrophilicity, metallic conductivity, and size tunability, the use of MXene is restricted in biomedical applications due of its poor stability in physiological environments, lack of sustained and controlled drug release, and low biodegradability, and these limitations lead to the notion of adopting MXene/Polymer nanocomposites. The availability of functional groups on the surface of MXenes enables polymer functionalization. These polymers functionalized MXene nanocomposites exhibit high photothermal conversion efficiency, selectivity, and stimuli-responsiveness towards malignant cells, electron sensitivity, higher antibacterial properties, and the like. This review emphasizes the innovative exemplars of polymer functionalized MXene composites for the burgeoning biomedical applications, which include controlled and sustained drug delivery, antibacterial activity, photothermal cancer therapy, unambiguous biosensing, contrast-enhanced diagnostic imaging, and bone regeneration.     

基于石墨烯纳米材料的水质Cr(Ⅵ)电化学传感器

针对我国水质重金属六价铬（Cr（Ⅵ））污染问题突出,提出了一种基于石墨烯纳米材料的水质Cr（Ⅵ）电化学传感器。采用电化学方法还原氧化石墨烯,构建石墨烯纳米材料修饰金电极（rGO/Au）。采用扫描电子显微镜（SEM）和透射电子显微镜（TEM）技术表征了rGO/Au的表面形貌和结构;采用方波伏安法、循环伏安法和线性扫描伏安法等电化学方法研究了Cr（Ⅵ）在rGO/Au表面的直接电催化还原行为,优化了氧化石墨烯的电化学还原电位和还原时间,以及支持电解质pH、浓度和检测电位等实验参数;采用计时电流法,在无须预富集的条件下,考察了Cr（Ⅵ）浓度与rGO/Au响应电流之间的线性关系。实验结果表明,石墨烯纳米材料对Cr（Ⅵ）有明显的电催化还原活性,计时电流响应值与Cr（Ⅵ）浓度呈良好的线性关系,线性范围为5～2000μg·L^-1,最低检测限为0.5 μA·L^-1（S/N≥3）。所制备的rGO/Au具有对常见其他重金属干扰离子（Cr（Ⅲ）、Ni（Ⅱ）、Cu（Ⅱ）、Mg（Ⅱ）和Mn（Ⅱ））较好的抗干扰性能,11次连续测定后,响应值相对初始值下降幅度小于10%,表明该修饰电极具有较好的稳定性。本研究提出的电化学传感器具有检测方法简单、快速、环保以及可重复使用的优点,能够应用于水质重金属Cr（Ⅵ）的快速测定。     

Biodegradable and Multifunctional Polymer Micro-Tubes for Targeting Photothermal Therapy

We describe an innovative form of polymer micro-tubes with diverse functions including biodegradation, magnetic manipulation, and photothermal effect that employs and activates photothermal therapy to target cancer cells. The micro-tube comprised soybean protein isolate, poly-l-glutamic acid, magnetite nanoparticles, plus gold nanoparticles. Through electrostatic force, these components, with opposite charges, formed pairs of layers in the pores of the template, various bilayers of soybean protein isolate and poly-l-glutamic acid served as the biodegradable building wall to each micro-tube. The layers of magnetite nanoparticle functionalized micro-tubes enabled the micro-tube manipulate to target the cancer cells by using an external magnetic field. The photo-thermal effect of the layer of gold nanoparticles on the outer surface of the micro-tubes, when under irradiation and when brought about by the near infrared radiation, elevated each sample’s temperature. In addition, and when under the exposure of the near infrared radiation, the elevated temperature of the suspension of the micro-tubes, likewise with a concentration of 0.2 mg/mL, and similarly with a power of 2 W and as well maintained for 10 min, elevated the temperature of the suspension beyond 42 °C. Such temperatures induced apoptosis of target cancer cells through the effect of photothermal therapy. The findings assert that structured micro-tubes have a promising application as a photothermal agent. From this assertion, the implications are that this multifunctional agent will significantly improve the methodology for cancer diagnosis and therapy.     

Hollow mesoporous polyaniline nanoparticles with high drug payload and robust photothermal capability for cancer combination therapy

In recent years,synergistic chemo-photothermal therapy has revealed promising potential in treatments against various kinds of cancer.However,the development of superb photothermal agents with high drug loading capacity is still highly required.In this work,a hollow mesoporous polyaniline nanoparticle(HPANI NP) has been developed for encapsulating chemotherapeutic drug doxorubicin (DOX) with an remarkable drug loading content as high as 37.5％.Additional PEG modification endowed the drug-loaded HPANI NPs with improved water-dispersibility and bioavailability.Such PEG-HPANI-DOX NPs exhibited strong NIR absorbance and robust photothermal conversion capacity,exhibiting highly efficient synergistic cancer treatment.More interestingly,the responsively released DOX molecules could emit strong red fluorescence,which could be employed to monitor the cellular endocytosis and drug release profile of PEG-HPANI-DOX NPs.Finally,the as-fabricated NPs showed good biocompatibility and low tox-icity,serving as a promising nanoagent for highly efficient drug delivery and cancer combination therapy.     

Near‐infrared‐active and pH‐responsive fluorescent polymer‐integrated hybrid graphene oxide nanoparticles for the detection and treatment of cancer

Hybrid nanoparticles for theragnosis have great potentiality to bring desire functionalities in one integrated system. The development of bioimaging guided photothermal therapy (PTT) is pivotal in optimizing cytotoxic cancer therapy. We report near‐infrared (NIR)‐active and pH‐responsive fluorescent, catechol‐conjugated, reduced graphene oxide (rGO)‐anchored hybrid nanoparticles that can sharply increase the photothermal heat in response to NIR exposure and exhibit pH‐dependent fluorescence emission for the detection of tumor areas without causing cell toxicity. The optoelectronic absorption property of poly(3,4‐ethylenedioxythiophene) [PEDOT]:dopamine‐conjugated poly(4‐styrenesulfonate‐co‐maleic acid) [D‐PSM] and 3′,4′‐dihydroxyacetophenone/boron‐dipyrromethene [CCDP/BODIPY]‐quaternized polyethylene glycol grafted poly(dimethylaminoethyl methacrylate) (C/B‐PgP) present in this hybrid nanoparticles resulted in efficient photothermal conversion with pH‐tunable fluorescence that exerted sufficient photothermal cytotoxicity to cancer cells. The in vitro cellular uptake was measured by confocal laser scanning microscopy, allowing the therapeutic efficiency and bioimaging effects to be explored. We expect that the broad optical absorption property of PEDOT:D‐PSM with BODIPY‐conjugated polymers on rGO sheets would get tremendous attraction in this enormous rising PTT with cancer detectable biomarker. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43791.     

Barium Titanate Nanoparticles: Highly Cytocompatible Dispersions in Glycol-chitosan and Doxorubicin Complexes for Cancer Therapy

In the latest years, innovative nanomaterials have attracted a dramatic and exponentially increasing interest, in particular for their potential applications in the biomedical field. In this paper, we reported our findings on the cytocompatibility of barium titanate nanoparticles (BTNPs), an extremely interesting ceramic material. A rational and systematic study of BTNP cytocompatibility was performed, using a dispersion method based on a non-covalent binding to glycol-chitosan, which demonstrated the optimal cytocompatibility of this nanomaterial even at high concentration (100 μg/ml). Moreover, we showed that the efficiency of doxorubicin, a widely used chemotherapy drug, is highly enhanced following the complexation with BTNPs. Our results suggest that innovative ceramic nanomaterials such as BTNPs can be realistically exploited as alternative cellular nanovectors.     

Graphene Functionalized with Arginine Decreases the Development of Glioblastoma Multiforme Tumor in a Gene-Dependent Manner

Our previous studies revealed that graphene had anticancer properties in experiments in vitro with glioblastoma multiforme (GBM) cells and in tumors cultured in vivo. We hypothesized that the addition of arginine or proline to graphene solutions might counteract graphene agglomeration and increase the activity of graphene. Experiments were performed in vitro with GBM U87 cells and in vivo with GBM tumors cultured on chicken embryo chorioallantoic membranes. The measurements included cell morphology, mortality, viability, tumor morphology, histology, and gene expression. The cells and tumors were treated with reduced graphene oxide (rGO) and rGO functionalized with arginine (rGO + Arg) or proline (rGO + Pro). The results confirmed the anticancer effect of graphene on GBM cells and tumor tissue. After functionalization with amino acids, nanoparticles were distributed more specifically, and the flakes of graphene were less agglomerated. The molecule of rGO + Arg did not increase the expression of TP53 in comparison to rGO, but did not increase the expression of MDM2 or the MDM2/TP53 ratio in the tumor, suggesting that arginine may block MDM2 expression. The expression of NQO1, known to be a strong protector of p53 protein in tumor tissue, was greatly increased. The results indicate that the complex of rGO + Arg has potential in GBM therapy.     

A Step Forward in Breast Cancer Research: From a Natural-Like Experimental Model to a Preliminary Photothermal Approach

Breast cancer is one of the most frequently diagnosed malignancies and common causes of cancer death in women. Recent studies suggest that environmental exposures to certain chemicals, such as 7,12-Dimethylbenzanthracene (DMBA), a chemical present in tobacco, may increase the risk of developing breast cancer later in life. The first-line treatments for breast cancer (surgery, chemotherapy or a combination of both) are generally invasive and frequently associated with severe side effects and high comorbidity. Consequently, novel approaches are strongly required to find more natural-like experimental models that better reflect the tumors’ etiology, physiopathology and response to treatments, as well as to find more targeted, efficient and minimally invasive treatments. This study proposes the development and an in deep biological characterization of an experimental model using DMBA-tumor-induction in Sprague-Dawley female rats. Moreover, a photothermal therapy approach using a near-infrared laser coupled with gold nanoparticles was preliminarily assessed. The gold nanoparticles were functionalized with Epidermal Growth Factor, and their physicochemical properties and in vitro effects were characterized. DMBA proved to be a very good and selective inductor of breast cancer, with 100% incidence and inducing an average of 4.7 tumors per animal. Epigenetic analysis showed that tumors classified with worst prognosis were hypomethylated. The tumor-induced rats were then subjected to a preliminary treatment using functionalized gold nanoparticles and its activation by laser (650–900 nm). The treatment outcomes presented very promising alterations in terms of tumor histology, confirming the presence of necrosis in most of the cases. Although this study revealed encouraging results as a breast cancer therapy, it is important to define tumor eligibility and specific efficiency criteria to further assess its application in breast cancer treatment on other species.     

Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene

The allotropes of carbon nanomaterials (carbon nanotubes, graphene) are the most unique and promising substances of the last decade. Due to their nanoscale diameter and high aspect ratio, a small amount of these nanomaterials can produce a dramatic improvement in the properties of their composite materials. Although carbon nanotubes (CNTs) and graphene exhibit numerous extraordinary properties, their reported commercialization is still limited due to their bundle and layer forming behavior. Functionalization of CNTs and graphene is essential for achieving their outstanding mechanical, electrical and biological functions and enhancing their dispersion in polymer matrices. A considerable portion of the recent publications on CNTs and graphene have focused on enhancing their dispersion and solubilization using covalent and non-covalent functionalization methods. This review article collectively introduces a variety of reactions (e.g. click chemistry, radical polymerization, electrochemical polymerization, dendritic polymers, block copolymers, etc.) for functionalization of CNTs and graphene and fabrication of their polymer nanocomposites. A critical comparison between CNTs and graphene has focused on the significance of different functionalization approaches on their composite properties. In particular, the mechanical, electrical, and thermal behaviors of functionalized nanomaterials as well as their importance in the preparation of advanced hybrid materials for structures, solar cells, fuel cells, supercapacitors, drug delivery, etc. have been discussed thoroughly.     

A promising gene delivery system developed from PEGylated MoS2 nanosheets for gene therapy

A new class of two-dimensional (2D) nanomaterial, transition metal dichalcogenides (TMDCs) such as MoS₂, MoSe₂, WS₂, and WSe₂ which have fantastic physical and chemical properties, has drawn tremendous attention in different fields recently. Herein, we for the first time take advantage of the great potential of MoS₂ with well-engineered surface as a novel type of 2D nanocarriers for gene delivery and therapy of cancer. In our system, positively charged MoS₂-PEG-PEI is synthesized with lipoic acid-modified polyethylene glycol (LA-PEG) and branched polyethylenimine (PEI). The amino end of positively charged nanomaterials can bind to the negatively charged small interfering RNA (siRNA). After detection of physical and chemical characteristics of the nanomaterial, cell toxicity was evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Polo-like kinase 1 (PLK1) was investigated as a well-known oncogene, which was a critical regulator of cell cycle transmission at multiple levels. Through knockdown of PLK1 with siRNA carried by novel nanovector, qPCR and Western blot were used to measure the interfering efficiency; apoptosis assay was used to detect the transfection effect of PLK1. All results showed that the novel nanocarrier revealed good biocompatibility, reduced cytotoxicity, as well as high gene-carrying ability without serum interference, thus would have great potential for gene delivery and therapy.     

石墨烯复合功能材料及其在重金属离子检测的电化学研究与应用

石墨烯(GR)是典型的单原子碳纳米材料,具有独特的二维共辄平面结构,其高活性的比表面积和突出的导电性能,在电催化和敏感材料制备领域已得到广泛的应用。氧化石墨烯(GO)作为GR的前驱体,存在大量的含氧官能团,具有良好的水溶分散性。大量GO含氧官能团的介入会破坏其K-7T共辘结构,导致其电学性能变差。GO通过化学、水热合成或直接电化学还原方法可有效修复其共辄平面结构,得到导电性良好的还原氧化石墨烯(rGO),即GR.单组分的GR材料在实际应用中仍存在某些局限性,如电学活性相对较弱,与其它材料加工复合性能较差等。将GR、G O材料与其它功能材料进行复合,可进一步改善复合物的物理或化学性能,如分散性、加工修饰和电催化活性等。综述了石墨烯材料与金属及其氧化物纳米粒子、聚合物、掺杂原子、导电离子液体、碳纳米材料等功能材料复合后,能形成可调控的微结构,具有改性的化学性质和协同发挥的电学效应,表现出显著的电子传递能力及其功能性作用。论述了GR功能化修饰的复合材料作为敏感界面,构筑基于重金属离子检测的电化学生物传感器,可以实现对Pb2+,Hg2+,C『+等多种重金属离子的同时或分别检出,提出了GR复合制备材料的纳米结构特征、功能修饰作用对于提高传感器的电催化活性和选择性性能等方面的应用,并对该研究领域进行了总结与展望。     

Graphene Oxide Loaded with Protocatechuic Acid and Chlorogenic Acid Dual Drug Nanodelivery System for Human Hepatocellular Carcinoma Therapeutic Application

Hepatocellular carcinoma or hepatoma is a primary malignant neoplasm that responsible for 75–90% of all liver cancer in humans. Nanotechnology introduced the dual drug nanodelivery method as one of the initiatives in nanomedicine for cancer therapy. Graphene oxide (GO) loaded with protocatechuic acid (PCA) and chlorogenic acid (CA) have shown some anticancer activities in both passive and active targeting. The physicochemical characterizations for nanocomposites were conducted. Cell cytotoxicity assay and lactate dehydrogenase were conducted to estimate cell cytotoxicity and the severity of cell damage. Next, nanocomposite intracellular drug uptake was analyzed using a transmission electron microscope. The accumulation and localization of fluorescent-labelled nanocomposite in the human hepatocellular carcinoma (HepG2) cells were analyzed using a fluorescent microscope. Subsequently, Annexin V- fluorescein isothiocyanate (FITC)/propidium iodide analysis showed that nanocomposites induced late apoptosis in HepG2 cells. Cell cycle arrest was ascertained at the G2/M phase. There was the depolarization of mitochondrial membrane potential and an upregulation of reactive oxygen species when HepG2 cells were induced by nanocomposites. In conclusion, HepG2 cells treated with a graphene oxide–polyethylene glycol (GOP)–PCA/CA–FA dual drug nanocomposite exhibited significant anticancer activities with less toxicity compared to pristine protocatechuic acid, chlorogenic acid and GOP–PCA/CA nanocomposite, may be due to the utilization of a folic acid-targeting nanodrug delivery system.     

Polymer-functionalized carbon nanotubes in cancer therapy: a review

The increasing importance of nanotechnology in the field of biomedical applications has encouraged the development of new nanomaterials endowed with multiple functions. Novel nanoscale drug delivery systems with diagnostic, imaging and therapeutic properties hold many promises for the treatment of different types of diseases, including cancer, infection and neurodegenerative syndromes. Carbon nanotubes (CNTs) are both low-dimensional sp² carbon nanomaterials exhibiting many unique physical and chemical properties that are interesting in a wide range of areas including nanomedicine. Since 2004, CNTs have been extensively explored as drug delivery carriers for the intracellular transport of chemotherapy drugs, proteins and genes. In vivo cancer treatment with CNTs has been demonstrated in animal experiments by several different groups. Herein, the recent works on anticancer drug delivery systems based on carbon nanotubes are reviewed and some of more specific and important novel drug delivery devices are discussed in detail. This paper focuses on modifications of CNTs by polymers through covalent and non-covalent attachments: two different methods as critical steps in preparation of anticancer drug delivery systems from CNTs. In this respect the in vivo and in vitro behaviors and toxicity of the CNTs modified by polymers are summarized as well. Well-functionalized CNTs did not show any significant toxicity after injection into mice. Moreover, administration and excretion of CNT-based nanocarriers are discussed. It was concluded that future development of CNT-based nanocarriers may bring novel opportunities to cancer diagnosis and therapy.     

Step-by-Step Immune Activation for Suicide Gene Therapy Reinforcement

Gene-directed enzyme prodrug gene therapy (GDEPT) theoretically represents a useful method to carry out chemotherapy for cancer with minimal side effects through the formation of a chemotherapeutic agent inside cancer cells. However, despite great efforts, promising preliminary results, and a long period of time (over 25 years) since the first mention of this method, GDEPT has not yet reached the clinic. There is a growing consensus that optimal cancer therapies should generate robust tumor-specific immune responses. The advent of checkpoint immunotherapy has yielded new highly promising avenues of study in cancer therapy. For such therapy, it seems reasonable to use combinations of different immunomodulators alongside traditional methods, such as chemotherapy and radiotherapy, as well as GDEPT. In this review, we focused on non-viral gene immunotherapy systems combining the intratumoral production of toxins diffused by GDEPT and immunomodulatory molecules. Special attention was paid to the applications and mechanisms of action of the granulocyte-macrophage colony-stimulating factor (GM–CSF), a cytokine that is widely used but shows contradictory effects. Another method to enhance the formation of stable immune responses in a tumor, the use of danger signals, is also discussed. The process of dying from GDEPT cancer cells initiates danger signaling by releasing damage-associated molecular patterns (DAMPs) that exert immature dendritic cells by increasing antigen uptake, maturation, and antigen presentation to cytotoxic T-lymphocytes. We hypothesized that the combined action of this danger signal and GM–CSF issued from the same dying cancer cell within a limited space would focus on a limited pool of immature dendritic cells, thus acting synergistically and enhancing their maturation and cytotoxic T-lymphocyte attraction potential. We also discuss the problem of enhancing the cancer specificity of the combined GDEPT–GM–CSF–danger signal system by means of artificial cancer specific promoters or a modified delivery system.     

Highly soluble polyetheramine-functionalized graphene oxide and reduced graphene oxide both in aqueous and non-aqueous solvents

Among many methods to synthesize graphene, solution-based processing provides many advantages owing to its low cost, high productivity, chemical versatility, and scalability. In particular, graphene oxide (GO) is one of the most promising nanocarbons that enable the incorporation of graphene and related materials into bulk materials and nanocomposites. GO has hydrophilic nature that enables straightforward dispersion in aqueous solution by sonication, but GO show poor dispersibility in common organic solvents, which prevent much wider applications such as solution-mixing polymer nanocomposites. Here we prepared highly soluble, functionalized GO in both aqueous and non-aqueous solvents. This was achieved by reacting polyetheramine consisting of amphiphilic components, e.g., polypropylene oxide and polyethylene oxide, with carboxylic acid groups at GO edges. Moreover, the reduced GO (rGO) was also highly dispersible in aqueous solution as well as non-aqueous solutions. These functionalized GO and rGO can be used for many solution-processed graphene composites.     

Construction of biocompatible bilayered light-driven actuator composed of rGO/PNIPAM and PEGDA hydrogel

To construct an actuator with biocompatibility and potential use in biomedicine field, a light-driven actuator composed of reduced graphene oxide (rGO)/poly (N-isopropyl acrylamide) (PNIPAM) and poly (ethylene glycol) diacrylate (PEGDA) hydrogel is constructed. First, rGO/PNIPAM hydrogel is prepared by free radical polymerization and l -ascorbic acid reduction, of which the surface temperature increases quickly under near-infrared (NIR) laser indicating the efficient photothermal conversion of rGO. The results of cytotoxicity tests demonstrate that rGO/PNIPAM is biocompatible and has no obvious toxicity to myoblast line C2C12 cells. Second, bilayer hydrogel composed of rGO/PNIPAM and PEGDA is prepared using a similar method layer-by-layer. The bilayer strip bends towards rGO/PNIPAM under NIR laser. The bending is improved after reduction. The laser power density has a strong impact on the bending rate and degree. The reversible bending deformation indicates the structural stability. All the above results approve that the bilayer actuator has great potential to be applied in biomedicine fields such as organ-on-chip, drug-carrier, or surgical aid.     

Aptamer-Functionalized Hybrid Nanostructures for Sensing,Drug Delivery,Catalysis and Mechanical Applications

Sequence-specific nucleic acids exhibiting selective recognition properties towards low-molecular-weight substrates and macromolecules (aptamers) find growing interest as functional biopolymers for analysis, medical applications such as imaging, drug delivery and even therapeutic agents, nanotechnology, material science and more. The present perspective article introduces a glossary of examples for diverse applications of aptamers mainly originated from our laboratory. These include the introduction of aptamer-functionalized nanomaterials such as graphene oxide, Ag nanoclusters and semiconductor quantum dots as functional hybrid nanomaterials for optical sensing of target analytes. The use of aptamer-functionalized DNA tetrahedra nanostructures for multiplex analysis and aptamer-loaded metal-organic framework nanoparticles acting as sense-and-treat are introduced. Aptamer-functionalized nano and microcarriers are presented as stimuli-responsive hybrid drug carriers for controlled and targeted drug release, including aptamer-functionalized SiO₂ nanoparticles, carbon dots, metal-organic frameworks and microcapsules. A further application of aptamers involves the conjugation of aptamers to catalytic units as a means to mimic enzyme functions “nucleoapzymes”. In addition, the formation and dissociation of aptamer-ligand complexes are applied to develop mechanical molecular devices and to switch nanostructures such as origami scaffolds. Finally, the article discusses future challenges in applying aptamers in material science, nanotechnology and catalysis.