Disproportionation and Methylation of Toluene with Methanol Over Zeolite Catalysts

Zeolites TNU-9, SSZ-33, mordenite (MOR) and ZSM-5 were evaluated for their activities in toluene disproportionation and methylation reaction of toluene with methanol. The medium-pore zeolite TNU-9 was found to possess the highest conversion in toluene disproportionation as compared with SSZ-33, mordenite and ZSM-5 based catalyst. Zeolite mordenite with the highest Si/Al ratio of 135.9 (the lowest concentration of active sites) exhibited the highest toluene conversion and maximum xylene yield in toluene methylation. On mordenite, the presence of channel intersections allows more reaction space for the formation of bulky intermediates and/or products and the 12-ring channels on the other hand, allow diffusion without trapping, since the channel diameter is large enough. In toluene methylation, xylene selectivity at the same conversion level follows the order: ZSM-5 > TNU-9 > MOR > SSZ-33, which implies that xylene selectivity is directly related to the size of channels from medium to large pore zeolites. The medium-pore zeolite ZSM-5, with 10-ring channels, shows the lowest reactivity for further alkylation of xylene, while mordenite with 12-ring channel shows the highest reactivity for further alkylation of xylene.     

The Effect of Zeolite Structure on the Activity and Selectivity in p-Xylene Alkylation with Isopropyl Alcohol

The effect of zeolite architecture and channel dimensionality on p-xylene conversion and selectivity to 1-isopropyl-2,5-dimethyl-benzene was investigated in p-xylene alkylation with isopropyl alcohol over novel zeolites SSZ-33 and SSZ-35. Catalytic behavior of these zeolites was compared with those of zeolites Beta, mordenite, ZSM-11 and ZSM-5. It was found that p-xylene conversion increases with increasing pore size and connectivity of the channel system of individual zeolites with the exception of SSZ-35, which possesses a system of one-dimensional 10-ring channels that periodically open into wide, shallow cavities circumscribed by 18-rings. SSZ-35 exhibited the highest conversion among all zeolites at the reaction temperature of 150 °C and also the highest selectivity to 1-isopropyl-2,5-dimethyl-benzene. Molecular modeling confirmed the dimensions of the 18-ring cages are optimal for the formation of this alkylation product.     

Enhancing propylene production from catalytic cracking of Arabian Light VGO over novel zeolites as FCC catalyst additives

The catalytic cracking of vacuum gas oil over fluid catalytic cracking (FCC) catalyst containing novel additives was investigated to enhance propylene yield. A conventional ZSM-5, mesoporous ZSM-5 (Meso-Z), TNU-9 and SSZ-33 zeolite were tested as additives to a commercial equilibrium USY FCC catalyst (E-Cat). Their catalytic performance was assessed in a fixed-bed micro-activity test unit (MAT) at 520 °C and various catalyst/oil ratios. The cracking activity of all E-Cat/additives did not decrease by using these additives. The highest propylene yield of 12.2 wt.% was achieved over E-Cat/Meso-Z compared with 9.0 wt.% each over E-Cat/ZSM-5 and E-Cat/TNU-9, at similar gasoline yield penalty. The enhanced production of propylene over Meso-Z is attributed to its mesopores that suppressed secondary and hydrogen transfer reactions and offered easier transport and accessibility to active sites. The lower enhancement of propylene over the large-pore SSZ-33 additive was due to its high-hydrogen transfer activity. Gasoline quality was improved by the use of all additives, as octane rating increased by 7-12 numbers for all E-Cat/additives.     

Adsorption of CO<Subscript>2</Subscript> and CO on H-zeolites with different framework topologies and chemical compositions and a correlation to probing protonic sites using NH<Subscript>3</Subscript> adsorption

Adsorption of CO₂ and CO at 25 °C has been conducted using commercially-available (Y, ZSM-5) and laboratory-synthesized (SSZ-13, SAPO-34) H-zeolites with different framework topologies and chemical compositions, and their textual and surface properties have been characterized by N₂ sorption and NH₃ adsorption techniques. All the zeolites were microporous, although ZSM-5 and SSZ-13 apparently showed a mesoporous sorption behavior due to the interparticle spaces. The zeolites had Si/Al values in the order of SSZ-13 (16.44) > ZSM-5 (16.08) ? Y (2.82) ? SAPO-34 (0.19). Regardless, high CO₂ adsorption capacity was obtained for SSZ-13 and SAPO-34 with a CHA framework. The FAU zeolite Y with the highest micropore volume showed less CO₂ adsorption than the CHA zeolites and the MFI-type ZSM-5 yielded the poorest performance. Probing acid sites in the H-form zeolites using NH₃ disclosed that these all contain both weak and strong acid sites with significant dependence of their strengths and amounts on the topology. The acid strength of the weak acid sites in the CHA zeolites was the weakest, which might allow a stronger interaction with CO₂. The H-zeolites gave CO₂/CO selectivity factors that were in the range of 4.61–11.0, depending on the framework topology.     

Aromatic Transformations Over Mesoporous ZSM-5: Advantages and Disadvantages

Catalytic behavior of mesoporous ZSM-5 was investigated in toluene disproportionation, toluene alkylation with isopropyl alcohol, and p-xylene alkylation with isopropyl alcohol to understand the effect of the presence of mesopores. Three ZSM-5 zeolites (conventional one and two mesoporous differing in the mesopore volume) having similar Si/Al ratio were synthesized and characterized as for their acidity (internal and external) as well as their micropore/mesopore volume. No substantial differences among three samples were observed as for the type and concentration of Brønsted and Lewis acid sites as well as their location in zeolite channels or on external surface of zeolite crystals. Conversions of toluene and p-xylene increased with increasing volume of mesopores in ZSM-5 zeolite while the selectivity to individual products depended on the type of reaction. In general, selectivity to sum of xylenes in toluene disproportionation, sum of isopropyltoluenes in toluene alkylation and to 1-isopropyl-2,5-dimethylbenzene in p-xylene alkylation increased due to a shorter contact time molecules spent in mesoporous ZSM-5 catalysts. In contrast, para-selectivity decreased as diffusion pathways were shorten due to the presence of mesopores.     

Effect of crystal size and surface modification of ZSM-5 zeolites on conversion of ethanol to propylene

The conversion of ethanol to propylene was carried out over ZSM-5 zeolites (Si/Al ratio ≈ 20) with a small crystal size of ca. 30 nm. Catalyst deactivation was significantly suppressed over the nanometer-sized ZSM-5 zeolite, indicating that the small crystal was more tolerant to coking. On the other hand, the selectivity of this zeolite to propylene was lower than that of conventional ZSM-5 zeolites (ca. 2 μm). It was suggested that the large external surface area of the nanometer-sized ZSM-5 zeolite catalyzed undesired reactions. To elucidate the reason for the decreased selectivity, the external surfaces of the nanometer-sized crystals were covered with a very thin pure-silica ZSM-5 layer by a hydrothermal synthesis. The obtained crystal maintained the same crystal size and had a silica-rich surface (Si/Al ratio ≈ 50). After the surface modification, the selectivity to propylene was improved without any decrease in the catalyst life.     

甲苯在硅沉积结合水热改性ZSM-5分子筛上的选择性歧化

采用液相沉积法研究了硅改性剂结合水热改性对择形分子筛的表面酸性和孔结构参数的影响。以甲苯的歧化反应为探针，考察了改性剂的种类和改性次数等因素对催化剂选择性和活性的影响。结果表明，硅改性剂能显著改变分子筛的强酸性，可以对择形分子筛的孔结构进行精细调节。分子筛改性后甲苯的转化率有所降低，但对二甲苯的选择性明显提高。     

甲醇制烃反应ZSM-5催化剂微孔孔道控制的最新研究进展

甲醇在ZSM-5分子筛催化作用下，定向转化为低碳烯烃、汽油和芳烃等产品，是现代煤化工的重要技术。虽然ZSM-5结构规整有序，酸性强且水热稳定性好，具备优异的择形催化效应，但其孔结构以微孔为主，反应产物不能快速扩散出微孔，易形成积炭，导致催化剂活性降低而快速失活。缩短微孔孔道促进产物扩散成为甲醇定向转化催化剂研究的关键问题。本文总结了近十年来关于ZSM-5微孔孔道控制的最新研究进展，归纳了通过控制其晶粒尺寸、形貌和介孔结构，调控微孔孔道长度，提升反应分子在微孔内扩散性能的方法，特别分析了上述控制因子的关键调控机制；提出对纳米尺度的ZSM-5进一步精准构筑介孔结构，是获得高稳定性催化剂的重要途径；而在控制孔结构的基础上，优化表面酸性，有望提升甲醇制烃反应的产物选择性。本综述期望为甲醇制烃领域研究提供相关理论基础。     

Organosilane surfactant-assisted synthesis of mesoporous SSZ-39 zeolite with enhanced catalytic performance in the methanol-to-olefins reaction

SSZ-39 zeolite with AEI framework structure is a good catalyst candidate for the methanol-to-olefins (MTO) reaction. However, the diffusion limitation and coke formation often results in fast deactivation of the SSZ-39 zeolite catalyst. One solution for this challenge is to introduce mesoporosity in the SSZ-39 zeolite. Herein, we report the synthesis of mesoporous SSZ-39 zeolite using an organosilane surfactant, N,N-dimethyl-N-(3-(trimethoxysilyl)propyl)octan-1-aminium chloride, as a mesopore template and N,N-dimethyl-cis-2,6-dimethylpiperidinium as a micropore template. The obtained zeolites were characterized by X-ray diffraction, N₂ sorption, scanning electron microscopy, temperature programmed desorption of ammonia, and magic angle spinning nuclear magnetic resonance of ²⁷Al. The results show that the mesoporous SSZ-39 zeolite has high crystallinity, meso/microporosity, high surface area, cuboid morphology, and abundant acidic sites. More importantly, this mesoporous SSZ-39 zeolite exhibits enhanced catalyst lifetime in the MTO reaction due to the presence of mesoporosity for fast mass transfer, compared with a conventional SSZ-39 zeolite without mesoporosity.     

Vanadia loaded hierarchical ZSM-5 zeolite: a promising catalyst for epoxidation of cyclohexene under solvent free condition

Hierarchical ZSM-5 zeolite with composite micro and mesoporous was obtained by alkali treatment of parent ZSM-5 for 60 min. Vanadia was loaded on modified zeolite by wetness impregnation technique (VDZ). The prepared samples were characterized by various techniques including XRD, FTIR, TGA, UV-DRS, TEM, XPS and nitrogen adsorption–desorption. Vanadia loaded sample was found to exhibit excellent catalytic activity for the epoxidation of cyclohexene by tertiary butyl hydroperoxide. A controlled reaction was carried out to demonstrate the utility of hierarchical topology of the catalyst. A free radical mechanism was proposed for the reaction with rate constant of 6.91 × 10^?2 L mol^?1 min^?1 and activation energy of 41.81 kJ mol^?1. The reaction was carried out without the use of any solvent and the catalytic activity of VDZ was retained even after five runs.     

Dodecatungstocobaltate supported over ZSM-5 zeolite as novel solid catalyst in selective sulfide oxidation

The catalytic behavior of a Keggin type potassium dodecatungstocobaltate (II) salt supported on ZSM-5 zeolite for wet peroxide oxidation of 2-(methylthio)benzothiazole, as a model organic sulfide, was thoroughly studied. Microporous ZSM-5 zeolite was obtained by the hydrothermal crystallization method. The Keggin salt was incorporated in the MFI zeolite matrix by the wet impregnation method followed by calcination at 350 °C. Catalysts were further characterized by X ray diffraction, UV–Vis diffuse reflectance spectroscopy and scanning electron microscopy-EDAX techniques. Supported and bulk Keggin dodecatungstocobaltate (II) were compared with pure H-ZSM-5 zeolite as catalysts for the sulfide oxidation. When the reaction was not catalyzed, just a 9 mol% of sulfide conversion was obtained. Reaction parameters, such as nature of the solvent, hydrogen peroxide concentration, reaction time, catalyst mass, substrate initial concentration and reaction temperature, were evaluated to reach the optimum reaction conditions, considering substrate conversion and sulfoxide and sulfone selectivities. Catalyst stability in several oxidation cycles was also examined.     

聚苯基甲基硅氧烷改性ZSM-5分子筛上的甲苯择形歧化反应

以聚苯基甲基硅氧烷为改性剂,采用化学液相沉积法对ZSM-5分子筛催化剂进行改性修饰,考察改性催化剂的甲苯择形歧化反应性能。采用XRD、BET、NH 3-TPD表征改性催化剂的孔结构和酸性质。结果表明,聚苯基甲基硅氧烷作为改性剂可以增加催化剂的弱酸中心和中强酸中心酸量,同时缩小催化剂的平均孔径,改性程度与改性次数有关。改性催化剂用于甲苯歧化反应可以增加对二甲苯的选择性,对二甲苯选择性的增加程度与改性次数有关,改性次数增多,对二甲苯选择性增加越显著,同时甲苯转化率越低,副反应越多。     

磷镁改性的ZSM-5分子筛催化性能研究

研究了磷、镁改性对ZSM-5分子筛的孔结构和酸性的影响。采用甲苯的歧化反应为探针反应,考察了改性后分子筛催化甲苯选择歧化反应的活性和选择性。结果表明,磷、镁单独改性时,随着负载质量分数的增加,转化率逐渐增加,且大于相同工艺条件下HZSM-5的转化率。当磷质量分数达到3％～5％ 或镁质量分数达到1％时,转化率达到最大值,这时对二甲苯为平衡组成,基本没有选择性。磷镁复合改性时,既可以提高催化剂的选择性,又可以使催化剂的活性不至于降得很低。在磷质量分数为9％、镁质量分数为1％时,改性效果最好。     

TEOS-化学液相沉积法改性ZSM-5催化剂上的高选择性甲苯择形歧化反应

Shape-selective catalysts for the disproportionation of toluene were prepared by the modification of the cylinder-shaped ZSM-5 zeolite extrudates with chemical liquid deposition with TEOS (tetraethyl orthosilicate).Various parameters for preparing catalysts were changed to investigate the suitable conditions.The resulting cata-lysts were tested in a pressured fixed bed reactor and characterized by SEM (scanning electron microscopy).The conversion of toluene and para-xylene selectivity were influenced remarkably by the n(SiO2)/n(Al2O3) ratio of ZSM-5 zeolite,the type and amount of deposition agent,acid and solvent used,and the time and cycle of deposition treatment.TEOS was proved to be a more efficient agent than the conventional polysiloxanes when the deposition amount was low.The catalyst prepared at the suitable conditions exhibited a high para-xylene selectivity of 91.1% with considerable high conversion of 25.6%.SEM analyses confirmed the formation of a layer of amorphous silica on the external surface of ZSM-5 zeolie crystals,which was responsible for the highly enhanced shape-selectivity.     

Catalytic pyrolysis of tyres: influence of catalyst temperature

Two stage pyrolysis–catalysis of used tyres was undertaken to upgrade the derived oil to a highly aromatic oil suitable to be used as a chemical feedstock rather than a liquid fuel. The tyres were pyrolysed in a fixed bed reactor and the evolved pyrolysis gases were passed through a secondary fixed bed reactor containing zeolite catalyst. The pyrolysis reactor was maintained at 500 °C and the influence of catalyst temperature between 430 and 600 °C on the yield and composition of the derived oils was examined. Two zeolite catalysts were examined; a Y-type zeolite catalyst and zeolite ZSM-5 catalyst of differing pore size and surface activity. The influence of the catalyst was to reduce the yield of oil with a consequent increase in the gas yield and formation of coke on the catalyst. Single ring aromatic hydrocarbons, benzene, toluene and xylenes present in the oils showed a marked increase in the presence of the catalyst. Naphthalene and alkylated naphthalenes were also analysed and showed a similar marked increase in the concentration when a catalyst was present. The Y-type zeolite catalyst of larger pore size and higher surface activity was found to produce higher concentrations of aromatic compounds compared to the ZSM-5 catalyst. Increasing the catalyst temperature resulted in significant changes in the concentration of benzene, toluene, xylenes, naphthalene and the alkylated naphthalenes.     

甲苯甲醇烷基化制对二甲苯催化剂中试反应性能研究

经过多步改性制备了负载二氧化硅（SiO₂）、氧化镁（MgO）、五氧化二磷（P₂O₅）、贵金属铂（Pt）的纳米ZSM-5分子筛催化剂,并在六段固定床反应器上分段装填该催化剂720 g进行甲苯、甲醇烷基化制对二甲苯反应活性评价。实验结果表明,通过调变甲醇和甲苯物质的量比可以使甲苯转化率在22%~30%可调,烷基化液相产物中二甲苯选择性保持在95%以上,二甲苯中对二甲苯选择性保持在95%以上;催化剂单程寿命达到1 300 h,随着反应时间延长催化剂的活性有所下降。通过X射线衍射（XRD）、热重分析（TG-DTG）和氮气吸附-脱附等手段对参加反应前后的催化剂进行了表征,结果表明反应中生成的积炭堵塞了分子筛的孔道或覆盖了催化剂的活性位;经过在反应器内原位再生,催化剂的反应活性基本恢复到新鲜催化剂水平。     

Application of Novel Zeolite Y Nanoparticles in Catalytic Cracking Reactions

The cracking activity of a fluid catalytic cracking (FCC) catalyst containing novel zeolite Y nanoparticles fabricated using mesoporous silica (average particle size of 150 nm) was examined and compared with the performance of other catalysts. The activity experiments were carried out in a fluidized bench-scale batch riser simulator reactor. The bulky probing compound of 1,3,5-triisopropylbenzene (TIPB) was cracked to lighter compounds over a catalyst containing 25% of the developed zeolite. The synthesized sodium-type zeolite nanoparticles were subjected to two cycles of ion-exchange treatment using ammonium sulfate and lanthanum chloride and then to calcination. To investigate the effects of particle size on the activity, three additional catalysts were prepared with the mean particle size of the supported zeolites ranging from 450 to 1800 nm. The preparation of the FCC catalysts was conducted by mixing the highly aqueous dispersed zeolite Y nanoparticles with colloidal silica–alumina as a matrix and silica sol as a binder. The results of the catalytic cracking of TIPB demonstrated the significant effect of the size reduction of the synthesized zeolite Y nanoparticles on the catalytic performance of the catalyst. The FCC catalyst that contained zeolite Y nanoparticles (150 nm) showed superior conversion and selectivity percentages for the main products. The results of this study have a direct implication on the preparation of colloidal catalysts containing zeolite Y nanoparticles, which form stable emulsion with petroleum products. These emulsions can be utilized for slurry and ebullated bed reactors in heavy oil upgrading applications.     

High activity in catalytic cracking of large molecules over a novel micro-micro/mesoporous silicoaluminophosphate

Abstract  

A novel micro-micro/mesoporous silicoaluminophosphate ZSM-5-SAPO-5/MCM-41 (define as MZS-5) composite material with regular spherical morphology was synthesized through a novel process of the self-assembly of CTAB surfactant micelles with silica-alumina source which originated from the alkaline treatment of ZSM-5 zeolite. The physical properties of the MZS-5 composite material were characterized by XRD, FT-IR, Nitrogen adsorption–desorption, SEM and Py-FTIR techniques. Catalytic tests showed that the MZS-5 composite catalyst exhibited higher catalytic activity compared with the conventional microporous ZSM-5, SAPO-5 zeolite and mesoporous Al-MCM-41 molecular sieve for catalytic cracking of 1,3,5-triisopropylbenzene (TIPB). The remarkable catalytic reactivity of TIPB molecules was mainly attributed to the presence of the hierarchical zeolite structure. In the MZS-5 structure, the mesopores provided pathways for transportation of larger molecules and the microporous ZSM-5 and SAPO-5 zeolite provided acidic sites for catalytic activity.     

Metal Exchanged ZSM-5 Zeolite Based Catalysts for Direct Decomposition of N2O

Co+Pt/ZSM-5 and Ag+Pt/ZSM-5 type catalysts were prepared by ion exchange method followed by calcination. These Co and Ag based catalysts, promoted by a small amount of Pt have been studied for their catalytic activity towards N₂O decomposition. Both the catalysts show high catalytic activity, however, cobalt–platinum based catalyst shows relatively better activity at higher temperature. At 550 °C almost 100% conversion of N₂O is achieved over Co+Pt/ZSM-5 with a maximum of 0.08479 mmole of N₂O decomposed per gram of the catalyst per unit time. These catalytic materials have been characterized for their structure, composition, morphology and other details, using XRD, SEM, EDX, ICP, BET techniques. Much improved catalytic activity for the bimetallic zeolite than the mono-metal containing compositions clearly demonstrate the synergistic effect of these transition metals, while high surface area of ZSM-5 is also responsible for the improved N₂O decomposition activity.     

Adsorption of Carbon Dioxide on High-Silica Zeolites with Different Framework Topology

Adsorption isotherms of carbon dioxide were measured on six high-silica zeolites TNU-9, IM-5, SSZ-74, ferrierite, ZSM-5 and ZSM-11 comprising three-dimensional 10-ring (8-ring for ferrierite) at 273, 293, 313 and 333 K. Based on the known temperature dependence of CO₂ adsorption, isosteric heats of adsorption were calculated. The obtained adsorption capacities and isosteric adsorption heats related to the amount of CO₂ adsorbed have provided detailed insight into the carbon dioxide interaction with zeolites of different framework topology. The zeolites TNU-9 and ferrierite are characterized by pronounced energetic heterogeneity whereas due to the location of Na⁺ cations in the same positions the isosteric adsorption heats of CO₂ adsorption on IM-5, ZSM-5 and ZSM-11 zeolites are rather constant for molecular ratio CO₂/Na⁺ < 1. As IM-5 zeolite has a maximum adsorption capacity, it appears to have optimum properties for carbon dioxide separation.