共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
4.
5.
6.
综述了近年来聚酰胺工程塑料的各种摩擦学改性方法及改性聚酰胺材料的摩擦磨损形式与机制。重点从无机粒子填充改性,纤维增强改性,无机粒子/纤维混杂改性,与树脂共混,表面改性等几个方面讨论了聚酰胺工程塑料的摩擦学性能及机理的研究进展情况,并指出聚酰胺工程塑料的摩擦学改性研究方向。 相似文献
7.
综述了近年来国内外对聚氯乙烯(PVC)增韧改性的方法,重点介绍了弹性体共混、纳米粒子填充、纤维增强、弹性体/纳米粒子复合材料增韧改性以及绿色填料在PVC增韧改性中的研究进展,指出了改性PVC复合材料具有广阔的应用前景。但开发价格低廉的纳米材料,简化生产工艺,降低产品成本,纳米复合材料增韧PVC的机理、多相协同增韧PVC的机理、不同填料的混杂效应及其协同机理、不同品种木粉改性PVC等尚需进一步研究。 相似文献
8.
9.
利用玻璃纤维和芳纶纤维的混杂纤维增强酚醛泡沫,考察了玻璃纤维和芳纶纤维的混杂比对酚醛泡沫的压缩强度、弯曲强度和冲击强度的影响。结果表明,玻璃纤维能够大幅提高酚醛泡沫的压缩强度,且在混杂纤维增强的酚醛泡沫中,压缩强度随着玻璃纤维所占的比重的增加而增大;芳纶纤维能够大幅提高酚醛泡沫的冲击强度,且在混杂纤维增强的酚醛泡沫中,冲击强度随着芳纶纤维所占的比重的增加而增大;玻璃纤维和芳纶纤维均可提高酚醛泡沫的弯曲强度,但当二者以1∶1(质量比,下同)的比例混杂增强酚醛泡沫时,复合酚醛泡沫的弯曲强度达到最大,此时出现了两种纤维最优的混杂协同效应。 相似文献
10.
本文对市售二氧化硅粒子进行疏水改性,分别用改性前和改性后的二氧化硅粒子与十二烷基硫酸钠制备泡沫分散液,探讨了二氧化硅粒子亲、疏水性,粒子浓度,粒子在气/液界面膜上的吸附量以及动态拉伸条件下的液膜稳定性的变化规律。研究结果表明,在搅拌条件下,与改性后粒子相比,改性前粒子对维持泡沫体系的起泡性和稳定性作用较强。泡沫稳定性随二氧化硅粒子质量分数的增加而增大,在粒子浓度为0.05%时达到最大值。在拉伸条件下,改性后粒子对液膜稳定性的增强效果优于改性前粒子的作用。改性后二氧化硅粒子质量分数为0.05%的分散液的液膜拉伸最长。 相似文献
11.
It is well established that a wide range of drugs of abuse acutely boost the signaling of the sympathetic nervous system and the hypothalamic–pituitary–adrenal (HPA) axis, where norepinephrine and epinephrine are major output molecules. This stimulatory effect is accompanied by such symptoms as elevated heart rate and blood pressure, more rapid breathing, increased body temperature and sweating, and pupillary dilation, as well as the intoxicating or euphoric subjective properties of the drug. While many drugs of abuse are thought to achieve their intoxicating effects by modulating the monoaminergic neurotransmitter systems (i.e., serotonin, norepinephrine, dopamine) by binding to these receptors or otherwise affecting their synaptic signaling, this paper puts forth the hypothesis that many of these drugs are actually acutely converted to catecholamines (dopamine, norepinephrine, epinephrine) in vivo, in addition to transformation to their known metabolites. In this manner, a range of stimulants, opioids, and psychedelics (as well as alcohol) may partially achieve their intoxicating properties, as well as side effects, due to this putative transformation to catecholamines. If this hypothesis is correct, it would alter our understanding of the basic biosynthetic pathways for generating these important signaling molecules, while also modifying our view of the neural substrates underlying substance abuse and dependence, including psychological stress-induced relapse. Importantly, there is a direct way to test the overarching hypothesis: administer (either centrally or peripherally) stable isotope versions of these drugs to model organisms such as rodents (or even to humans) and then use liquid chromatography-mass spectrometry to determine if the labeled drug is converted to labeled catecholamines in brain, blood plasma, or urine samples. 相似文献
12.
13.
ICP-MS法测定地球化学样品中As、Cr、Ge、V等18种微量痕量元素的研究 总被引:15,自引:0,他引:15
建立了测定地球化学样品中包括As、Cr、Ge、V等18种微量、痕量元素的ICP-MS方法。地化试样用HF-HNO3混酸分解后,以1 1 HNO3溶解干渣。由于制样不使用盐酸,避免了Cl对As、Cr、Ge、V的质谱干扰。用国家一级地球化学标准物质GBW 07309制备溶液优化仪器工作参数,并用于校准。方法测定限(6s)为:0.007~6.4μg/g,精密度(RSD%,n=12)为:29%~9.4%,经过国家一级地球化学标准物质的分析验证,结果与标准值吻合。方法已应用于国土资源调查的试样分析。 相似文献
14.
15.
以大分子引发剂氯乙酰化聚苯乙烯微球(PS-acyl-Cl)经原子转移自由基聚合(ATRP)法引发丙烯酰胺(AM)和甲基丙烯酸缩水甘油酯(GMA)单体的共聚接枝,制得一种触角状亲水性环氧载体(PS-acyl-g-P(AM-co-GMA)),再经二乙醇胺(DEA)的环氧基开环胺化反应,得到一种含多个-NCH2CH2OH螯合配基的多齿-五元螯合环的触角状亲水性羟胺树脂(PS-acyl-g-P(AM-co-GMA)-DEA)。将此树脂用于硼吸附研究,结果表明,PS-acyl-g-P(AM-co-GMA)-DEA树脂对硼的吸附满足Langmuir方程,为单分子层吸附;饱和吸附量约为37.7 mg·g-1,且树脂5 min即可达到吸附平衡,与其它已报道的吸硼树脂相比,该树脂具有更高的吸附量和吸硼速率。吸附动力学研究表明,树脂吸附硼的过程主要由颗粒扩散过程控制。重复使用5次后该树脂的吸附量基本不变,解吸率均在90%以上,重复使用性能良好。 相似文献
16.
收集了2001年7月到2002年6月有关国外塑料工业的相关期刊资料,介绍了2001年到2002年国外塑料工业的发展情况,提供了世界各地域塑料原材料的产量及构成比,日本、美国、加拿大、德国、法国、比利时、墨西哥、芬兰、西班牙等国家的树脂产量、消费量及增长率,以及日本、西欧、北美等地区的不同品种塑料原料消费量和增长率统计.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)不同品种的顺序,对树脂的产量、消费量及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等有关技术作了详细的介绍. 相似文献
17.
工业生产中物位测量的探讨与研究 总被引:4,自引:0,他引:4
在工业生产中常常会遇到常温,常压和一般介质的液位,料位和界面的测量,也会遇到高温,高压,易燃易爆,腐蚀性较强的液位,料位和界面的测量。在工业生产中物位测量有接触式和非接触式测量。但应根据生产工况及技术要求来合理选用。 相似文献
18.
19.
The suitability of confocal laser scanning microscopy (CLSM) in examining a wood-coating interface was evaluated using a clear
coating system. A comparison of the images of the wood-clear coating interface obtained using CLSM and light microscopy (LM)
showed a marked superiority of CLSM in revealing the details of the physical nature of the interaction between the clear coating
and the wood cell walls in the surface layer. The most distinct advantage of CLSM was in its ability to clearly resolve penetration
of the coating into very fine cracks in cell walls, details not obtainable with LM. The information presented here demonstrates
that CLSM has the potential to greatly enhance our understanding of the physical aspects of an interaction between the wood
and coating at the interface. 相似文献
20.
不同结构充油溶聚丁苯橡胶/炭黑/白炭黑复合材料的结构与性能 总被引:1,自引:0,他引:1
研究了炭黑/白炭黑填充的苯乙烯/乙烯基含量不同的充油溶聚丁苯橡胶(HPR 757 D和Buna VSL 5025-2 HM)的物理机械性能及动态力学性能,观察了填料在硫化胶中的微观分布情况。结果表明,炭黑与白炭黑相互镶嵌地分布在橡胶基质中,形成交织的填料网络。高苯乙烯基含量的HPR 757 D的拉伸强度、撕裂强度及耐磨性能优异,滚动阻力较小,填料与橡胶间的结合力强,填料的分散性较好。用白炭黑等量取代炭黑可以提高胶料的拉伸强度,降低其动态压缩温升。但炭黑/白炭黑的最佳配比与橡胶基质的分子结构有关,主链双键含量越高,白炭黑的用量也随之增多。 相似文献