共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
3.
促进我国硫铁矿制酸的发展 总被引:3,自引:1,他引:3
我国硫磺制酸原料主要依赖进口,大量进口硫磺已经影响到世界硫磺的供需关系,硫磺价格居高不下.硫铁矿是我国自有资源,可保证长期、稳定的供应,对我国硫酸工业的稳定和安全具有重要作用,我国发展硫铁矿制酸有其必要性.硫铁矿制酸实现大型化;采用高品位硫铁矿制酸,有效利用铁资源和热能;实现清洁生产,减少废水排放、尾气二氧化硫排放及综合利用废热,是发展方向.抓住硫酸需求增加的机遇,采用先进技术发展硫铁矿制酸,硫铁矿制酸一定会有良好的发展前景. 相似文献
4.
5.
《化工矿物与加工》2000,29(11):30
业内专家认为 ,我国硫酸产业应稳定硫铁矿制酸。随着冶炼烟气制酸以及硫磺制酸的发展 ,我国硫铁矿制酸的产量在总产量中将下降到 50 %左右 ,到 2 0 0 5年 ,其年产量基本稳定在 1 30 0~1 40 0万t。对现有大、中型硫铁矿制酸能力暂不能盲目改为硫磺制酸 ,主要是采取积极措施解决对水质的污染问题 ,降低硫铁矿制酸成本 ,增强竞争力 ;同时积极推广沸腾炉焙烧硫磺技术 ,在世界硫磺价格适合时 ,部分矿制酸装置改成以硫磺为原料生产硫酸 ,既可减少改造投资 ,充分利用世界硫资源 ,又能为硫磺价格的大幅度波动留有退路。我国需稳定硫铁矿制酸… 相似文献
6.
从环保、产量、成本、原料供应等方面,介绍了硫铁矿制酸装置在运行过程中存在的不足;我公司在不改变装置工艺流程和现有设备的基础上,把焙烧硫铁矿的沸腾炉改为固体硫磺掺烧石英砂工艺,对改造后工艺及经济指标做了分析。 相似文献
7.
我国硫磺制酸原料主要依赖进口,大量进口硫磺已经影响到世界硫磺的供需关系,硫磺价格居高不下。硫铁矿是我国自有资源,可保证长期、稳定的供应,对我国硫酸工业的稳定和安全具有重要作用,我国发展硫铁矿制酸有其必要性。硫铁矿制酸实现大型化;采用高品位硫铁矿制酸,有效利用铁资源和热能;实现清洁生产,减少废水排放、尾气二氧化硫排放及综合利用废热,是发展方向。抓住硫酸需求增加的机遇,采用先进技术发展硫铁矿制酸,硫铁矿制酸一定会有良好的发展前景。 相似文献
8.
1 概述近年来 ,国内因硫磺和冶炼烟气制酸对硫铁矿制酸形成冲击 ,硫铁矿制酸产量逐年下降 ,但总体来说我国仍是以硫铁矿制酸为主的国家。由于我国硫磺资源少 ,大力发展硫磺制酸 ,如国际市场硫磺价格升高 ,势必影响我国的硫酸产量。因此 ,稳定硫铁矿制酸仍是我国硫酸工业的根本。在我国的硫铁矿资源储量中 ,只有 3 9%为w(S)≥35%的工业一级品 ,其余多为贫矿。由于磁硫铁矿生产硫酸与普通硫铁矿相比要相对困难一些 ,因此总结焙烧磁硫铁矿生产经验 ,有利于贫矿的利用 ,对资源的合理利用有着长远的意义。丹东张家沟硫化铁矿是国家 1 0个重点… 相似文献
9.
对大型硫铁矿制酸装置发展的几点思考 总被引:1,自引:0,他引:1
介绍了硫铁矿制酸的精料政策、富氧焙烧和废热回收情况。加强低品位硫铁矿精选、高铁烧渣回收、富氧空气焙烧、废热回收,不仅符合国家循环经济的产业政策,而且可大幅度提升硫铁矿制酸企业的经济效益。 相似文献
10.
硫铁矿沸腾焙烧炉用废热锅炉系接触法硫酸生产过程中的新型设备,其功用在于充分利用硫铁矿焙烧反应的生成热,产生蒸汽用于发电,把废热转变成有效的能,以代替现行无功能的冷却装置,达到降低硫酸生产的消耗定额和生产成本的目的。 本文根据近几年来对有关企业二次能的利用与废热锅炉设计工作的一些体会,将着重阐述:沸腾焙烧炉用废热锅炉的热工特性,设备设计中的问题和难关解决方法,以及废热锅炉运行维护方面的若干问题。 文中对我院所拟废热锅炉各种设计方案作了扼要的分析,并附有计算成果表。而对废热锅炉重要组成部分之一的沸腾层内冷却装置及沸腾焙烧炉用废热锅炉的世界动态在本文中亦作了必要的介绍。 相似文献
11.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
12.
13.
14.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
15.
16.
17.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献
18.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献
19.
20.
A refined nonlinear value of the main parameter of a material, i.e., the elongation modulus versus the instant temperature value, was suggested for introduction into the computational algorithm of tempering stresses. 相似文献