共查询到20条相似文献,搜索用时 109 毫秒
1.
从一个实例出发,阐述了在电力系统变电运行部门采取客户/服务器方式进行管理信息系统开发研究的方法,并对开发实例的结构和功能加以介绍。 相似文献
2.
3.
图形化编程与继电保护装置开发 总被引:14,自引:2,他引:12
数字式保护装置的开发手段对保护装置的可靠性具有决定性影响。介绍了数字式保护装置开发手段的现状,指出了基于人工录入计算机语言的常规开发手段的缺点。通过分析提出了基于图形化语言进行保护装置开发的思想,对其优越性进行了阐述,实现所见即所得的开发,从开发手段上保证了保护装置的可靠性。通过一个应用实例,说明了运用图形化语言编程技术进行继电保护装置开发的可行性和优势。 相似文献
4.
5.
6.
对MIS系统开发过程中远程数据库访问的常见问题进行了分析和探讨,并结合实例分析了远程数据库访问的过程。 相似文献
7.
CPLD在电力系统微机保护装置中的应用 总被引:4,自引:0,他引:4
就 CPLD在电力系统继电保护装置的应用领域进行了研究 ,阐述了在微机保护装置中应用 CPL D的可行性和优越性 ,简单介绍了 CPLD的开发环境 ,最后给出了一个用 VHDL语言开发的简单的四输入加法数字滤波器实例。 相似文献
8.
工业缝纫机永磁同步伺服电动机系统 总被引:5,自引:4,他引:5
文中对工业缝纫机电气系统的组成和分类进行探讨,探索开发电气系统的技术路线,给出平缝机和套结机两种采用永磁同步伺服电机电气系统的开发实例。 相似文献
9.
为加快山区风电开发建设,通过理论研究、实例验证、综合分析相结合,对山区地形条件下风形成的原因和山区风资源的特点进行了分析,对山区风电开发的优势和难点进行了比较,并结合山区风资源的特点对山区风电场场址选择的原则和方法进行了总结。所提供的方法和思路对于合理选择山区风电场场址,充分利用山区风能资源,加快山区风电的开发建设具有较好的参考和应用价值。 相似文献
10.
结合开发SCADA/EMS软件的实践,介绍了COM的工作原理和单元的概念,并对组件在单元中的访问机制以及所需要的线程安全技术进行了分析,最后给出了一个简单的开发实例。 相似文献
11.
12.
13.
14.
15.
The present status of energy control centers in China is described. The present status of the power industry is briefly examined. A short review of early control center developments in the late seventies and early eighties is presented. More emphasis is placed on recent development of energy management systems, and experiences with designing and developing a few typical control centers are summarized. A survey of power system control centers in China before 1991 is also included in this paper. It is noted that the total installed capacity of generation reached 122336 MW and the annual generation reached 543.0 TWh in 1988. The outlook for research and development work in the next few years in China is also examined 相似文献
16.
电力市场中的串谋溢价和串谋行为规制 总被引:3,自引:0,他引:3
对发电侧电力市场2级委托-代理机制下的发电商1类串谋子契约(即作为代理人的发电商之间的串谋行为)进行了深入研究。首先分析了发电商的串谋行为对市场溢价的影响,溢价水平与发电商联盟的市场份额成正比,与市场需求弹性成反比;然后分析了电网阻塞对发电商串谋的影响,指出电能输出受限的区域发生串谋的原因大多是为了防止过度恶性竞争,电能受入阻塞的区域发生串谋的原因大多是为了追求高额垄断利润;最后对我国电力市场规制串谋行为的法律依据进行了研究,提出了根据现有技术水平设计合理强度的负激励机制来有效抑制串谋行为的方法,该方法对于市场监管和运行机构均具有重要的借鉴意义。 相似文献
17.
18.
Shock wave interaction with an adiabatic solid microparticle is numerically simulated. In the simulation, the shock wave is initiated by the Riemann problem with instantaneous removal of a diaphragm between the high- and low-pressure chambers. The calculation is performed in the two-dimensional formulation using the ideal gas equation of state. The left end of the tube is impermeable, while outflow from the right end is permitted. The particle is assumed to be motionless, impermeable, and adiabatic, and the simulation is performed for time intervals shorted than the time of velocity and temperature relaxation of the particle. The numerical grid is chosen for each particle size to ensure convergence. For each particle size, the calculated hydraulic resistance coefficient describing the particle force impact on the flow is compared with that obtained from the analytical Stokes formula. It is discovered that the Stokes formula can be used for calculation of hydraulic resistance of a motionless particle in a shock wave flow. The influence of the particle diameter on the flow perturbation behind the shock front is studied. Specific heating of the flow in front of the particle is calculated and a simple estimate is proposed. The whole heated region is divided by the acoustic line into the subsonic and supersonic regions. It is demonstrated that the main heat generated by the particle in the flow is concentrated in the subsonic region. The calculations are performed using two different 2D hydro codes. The energy release in the flow induced by the particle is compared with the maximum possible heating at complete termination of the flow. The results can be used for estimating the possibility of gas ignition in front of the particle by a shock wave whose amplitude is insufficient for initiating detonation in the absence of a particle. 相似文献
19.
自主式寻迹机器人小车的设计 总被引:6,自引:5,他引:6
本文结合机器人竞赛,介绍了自主式寻迹机器人小车的设计和具体实现.机器人以凌阳公司的SPCE061A为平台.机器人由传感器、控制器和驱动器等模块组成.采用反射式红外传感器来辨别路线.传感器模块包括了消除干扰信号的电路.对反射光强进行测量,以此为依据设置阈值电压以保证系统的可靠性和准确性.控制模块预置了导航地图并实现访问景点的PID控制算法.驱动模块的电机速度采用PWM方式进行控制. 相似文献
20.
大型多支承回转窑运行状态测试与分析便携式系统 总被引:2,自引:0,他引:2
回转窑是冶金、水泥、耐火材料生产中的关键设备,是一种重载、大扭矩、多支点、静不定运行系统。生产中需及时、准确、经常地检测回转窑的运行状态,以便对回转窑合理地进行调整与维护,确保它安全、高效地运行,这是相应生产企业提高经济效益的关键。本文介绍笔者研制的回转窑运行状态测试与分析便携式系统,该系统采用零位移方向键相测量原理测量轴线,克服了现有测量系统安装定位困难、测量操作复杂的缺点。系统结构简单、操作使用方便,能快速地进行回转窑运行轴线测量和运行状态分析,在实际应用中效果很好。 相似文献