高阶连续的形状可调三角多项式曲线曲面

目的目前使用的B样条曲线曲面存在着高连续阶与高局部调整性两者无法兼而有之的不足,且B样条曲线曲面的形状被控制顶点和节点向量唯一确定,这些因素影响着B样条方法的几何设计效果与方便性。本文旨在克服这种局限,以期构造具有高次B样条方法的高连续阶,低次B样条方法的高局部调整性,以及有理B样条方法权因子决定的形状调整性的曲线曲面。方法在三角函数空间上构造了一组含参数的调配函数,进而定义具有与3次B样条曲线曲面相同结构的新曲线与张量积曲面。结果新曲线曲面继承了B样条方法的凸包性、对称性、几何不变性等诸多性质。不同的是,同样是基于4点分段,3次均匀B样条曲线C2连续,而对于等距节点,在一般情况下,新曲线C5连续,当参数取特殊值时可达C7连续。新曲线在C5连续的情况下存在1个形状参数,能较好地调整曲线的形状同时又无须改变控制顶点。另外,将形状参数设为特定值,新曲线可以自动插值给定点列。新曲面具有与新曲线相应的优点。结论在强局部性下实现高阶连续性的形状可调分段组合曲线曲面,为高阶光滑曲线曲面的设计提供了可能,并且新曲线实现了逼近与插值的统一表示,能较好地应用于工程实际。调配函数的构造方法具有一般性,可用相同方式构造其他具有类似性质的调配函数。     

集多种特性的三次三角伪B样条

目的 为了同时解决传统多项式B样条曲线在形状调控、精确表示常见工程曲线以及构造插值曲线时的不足,提出了一类集多种特性的三次三角伪B样条。方法 首先构造了一组带两个参数的三次三角伪B样条基函数,然后在此基础上定义了相应的参数伪B样条曲线,并讨论了该曲线的特性及光顺性问题,最后研究了相应的代数伪B样条,并给出了最优代数伪B样条的确定方法。结果 参数伪B样条曲线不仅满足C²连续,而且无需求解方程系统即可自动插值于给定的型值点。当型值点保持不变时,插值曲线的形状还可通过自带的两个参数进行调控。在适当条件下,该参数伪B样条曲线可精确表示圆弧、椭圆弧、星形线等常见的工程曲线。相应的代数伪B样条具有参数伪B样条曲线类似的性质,利用最优代数伪B样条可获得满意的插值效果。结论 所提出的伪B样条同时解决了传统多项式B样条曲线在形状调控、精确表示常见工程曲线以及构造插值曲线时的不足,是一种实用的曲线造型方法。     

对可调控Bézier曲线的改进

目的 在用Bézier曲线表示复杂形状时,相邻曲线的控制顶点间必须满足一定的光滑性条件。一般情况下,对光滑度的要求越高,条件越复杂。通过改进文献中的“可调控Bézier曲线”,以构造具有多种优点的自动光滑分段组合曲线。方法 首先给出了两条位置连续的曲线G^l连续的一个充分条件,进而证明了“可调控Bézier曲线”在普通Bézier曲线的G^l光滑拼接条件下可达G^l(l为曲线中的参数)光滑拼接。然后对“可调控Bézier基”进行改进得到了一组新的基函数,利用该基函数按照Bézier曲线的定义方式构造了一种新曲线。分析了该曲线的光滑拼接条件,并根据该条件定义了一种分段组合曲线。结果 对于新曲线而言,只要前一条曲线的最后一条控制边与后一条曲线的第1条控制边重合,两条曲线便自动光滑连接,并且在连接点处的光滑度可以简单地通过改变参数的值来自由调整。由新曲线按照特殊方式构成的分段组合曲线具有类似于B样条曲线的自动光滑性和局部控制性。不同的是,组合曲线的各条曲线段可以由不同数量的控制顶点定义,选择合适的参数,可以使曲线在各个连接点处达到任何期望的光滑度。另外,改变一个控制顶点,至多只会影响两条曲线段的形状,改变一条曲线段中的参数,只会影响当前曲线段的形状,以及至多两个连接点处的光滑度。结论 本文给出了构造易于拼接的曲线的通用方法,极大简化了曲线的拼接条件。此基础上,提出的一种新的分段组合曲线定义方法,无需对控制顶点附加任何条件,所得曲线自动光滑,且其形状、光滑度可以或整体或局部地进行调整。本文方法具有一般性,为复杂曲线的设计创造了条件。     

Reparameterization of piecewise rational Bezier curves and its applications

degree . Although the curve segments are C ¹ continuous in three dimensions, they may be C ⁰ continuous in four dimensions. In this case, the multiplicity of each interior knot cannot be reduced and the B-spline basis function becomes C ⁰ continuous. Using a surface generation method, such as skinning these kinds of rational B-spline curves to construct an interpolatory surface, may generate surfaces with C ⁰ continuity. This paper presents a reparameterization method for reducing the multiplicity of each interior knot to make the curve segments C ¹ continuous in four dimensions. The reparameterized rational B-spline curve has the same shape and degree as before and also has a standard form. Some applications in skinned surface and ruled surface generation based on the reparameterized curves are shown. Published online: 19 July 2001     

Blending two parametric curves

Segments of two given curves can be blended to produce a segment of a new curve. Blending can provide a smooth transition from one curve to another and can give various degrees of smoothness at the endpoints of the blend, where the smoothness is measured analogously to parametric continuity C⁽ⁿ⁾ and geometric continuity G⁽ⁿ⁾. Blending can provide an approximation to a given curve segment. The accuracy of the approximation to short segments obtained by different blending formulas is compared via asymptotic analysis. Finally, it is shown how to find a blend that is a parametric polynomial whose parameter is approximately an arc length parameter.     

Quadratic approximation to plane parametric curves and its application in approximate implicitization

Expressing complex curves with simple parametric curve segments is widely used in computer graphics, CAD and so on. This paper applies rational quadratic B-spline curves to give a global C ¹ continuous approximation to a large class of plane parametric curves including rational parametric curves. Its application in approximate implicitization is also explored. The approximated parametric curve is first divided into intrinsic triangle convex segments which can be efficiently approximated with rational quadratic Bézier curves. With this approximation, we keep the convexity and the cusp (sharp) points of the approximated curve with simple computations. High accuracy approximation is achieved with a small number of quadratic segments. Experimental results are given to demonstrate the operation and efficiency of the algorithm.     

三次均匀B样条曲线的新扩展及应用

给出了一组含有2个形状参数λ_i,μ_i的三次多项式调配函数,它是三次均匀B样条基函数的扩展;分析了这组调配函数的性质,基于此组调配函数定义了一种带2个局部形状控制参数λ_i,μ_i的分段多项式样条曲线,它以三次均匀B样条曲线为特殊情形。新曲线不仅具有灵活的局部形状可调性和更强的描述能力,而且可以在不改变曲线G¹连续性和不影响曲线其他各段形状的同时,通过改变局部形状参数对曲线每段的形状进行多种方式的局部调整。最后讨论了新曲线在曲线造型中的应用,并给出了一个扩展曲面的定义。实例表明,新扩展曲线为曲线/曲面的设计提供了一种有效的新方法。     

Efficient circular arc interpolation based on active tolerance control

In this paper, we present an efficient sub-optimal algorithm for fitting smooth planar parametric curves by G¹ arc splines. To fit a parametric curve by an arc spline within a prescribed tolerance, we first sample a set of points and tangents on the curve adaptively as well as with enough density, so that an interpolation biarc spline curve can be with any desired high accuracy. Then, we construct new biarc curves interpolating local triarc spirals explicitly based on the control of permitted tolerances. To reduce the segment number of fitting arc spline as much as possible, we replace the corresponding parts of the spline by the new biarc curves and compute active tolerances for new interpolation steps. By applying the local biarc curve interpolation procedure recursively and sequentially, the result circular arcs with no radius extreme are minimax-like approximation to the original curve while the arcs with radius extreme approximate the curve parts with curvature extreme well too, and we obtain a near optimal fitting arc spline in the end. Even more, the fitting arc spline has the same end points and end tangents with the original curve, and the arcs will be jointed smoothly if the original curve is composed of several smooth connected pieces. The algorithm is easy to be implemented and generally applicable to circular arc interpolation problem of all kinds of smooth parametric curves. The method can be used in wide fields such as geometric modeling, tool path generation for NC machining and robot path planning, etc. Several numerical examples are given to show the effectiveness and efficiency of the method.     

A B-spline curve extension algorithmB 样条曲线延伸算法

B-spline curve extension is an important operation in computer aided design systems. In this paper, we present a new extension algorithm for B-spline curves. The algorithm uses curve unclamping to generate a uniform B-spline curve segment from the original curve and gradually extends the segment to pass through every target point. Algorithms of uniform B-spline curves are used such that our algorithm has a low time cost and can easily handle arbitrary-order derivative constraints at the target points. Generalization for non-uniform rational B-spline curve extension is also discussed, and examples show the efficiency of our method.     

Curve fitting and fairing using conic splines

We present an efficient geometric algorithm for conic spline curve fitting and fairing through conic arc scaling. Given a set of planar points, we first construct a tangent continuous conic spline by interpolating the points with a quadratic Bézier spline curve or fitting the data with a smooth arc spline. The arc spline can be represented as a piecewise quadratic rational Bézier spline curve. For parts of the G¹ conic spline without an inflection, we can obtain a curvature continuous conic spline by adjusting the tangent direction at the joint point and scaling the weights for every two adjacent rational Bézier curves. The unwanted curvature extrema within conic segments or at some joint points can be removed efficiently by scaling the weights of the conic segments or moving the joint points along the normal direction of the curve at the point. In the end, a fair conic spline curve is obtained that is G² continuous at convex or concave parts and G¹ continuous at inflection points. The main advantages of the method lies in two aspects, one advantage is that we can construct a curvature continuous conic spline by a local algorithm, the other one is that the curvature plot of the conic spline can be controlled efficiently. The method can be used in the field where fair shape is desired by interpolating or approximating a given point set. Numerical examples from simulated and real data are presented to show the efficiency of the new method.     

C3连续的单位四元数插值样条曲线

目的 构造一类C³连续的单位四元数插值样条曲线,证明它的插值性和连续性,并把它应用于刚体关键帧动画设计中。方法 利用R³空间中插值样条曲线的5次多项式调配函数的累和形式构造了S³空间中单位四元数插值样条曲线,它不仅能精确通过一系列给定的方向,而且能生成C³连续的朝向曲线。结果 与Nielson的单位四元数均匀B样条插值曲线的迭代构造方法相比,所提方法避免了为获取四元数B样条曲线控制顶点对非线性方程组迭代求解的过程,提高了运算效率;与单位四元数代数三角混合插值样条曲线的构造方法（Su方法）相比,所提方法只用到多项式基,运算速度更快。本例中创建关键帧动画所需的时间与Nielson方法和Su方法相比平均下降了73%和33%。而且,相比前两种方法,所提方法产生的四元数曲线连续性更高,由C²连续提高到C³连续,这意味着动画中刚体的朝向变化更加自然。结论 仿真结果表明,本文方法对刚体关键帧动画设计是有效的,对实时性和流畅性要求高的动画设计场合尤为适用。     

Approximate merging of B-spline curves via knot adjustment and constrained optimization

This paper addresses the problem of approximate merging of two adjacent B-spline curves into one B-spline curve. The basic idea of the approach is to find the conditions for precise merging of two B-spline curves, and perturb the control points of the curves by constrained optimization subject to satisfying these conditions. To obtain a merged curve without superfluous knots, we present a new knot adjustment algorithm for adjusting the end k knots of a kth order B-spline curve without changing its shape. The more general problem of merging curves to pass through some target points is also discussed.     

Efficient planar object tracking and parameter estimation usingcompactly represented cubic B-spline curves

In this paper, we consider the problem of matching 2D planar object curves from a database, and tracking moving object curves through an image sequence. The first part of the paper describes a curve data compression method using B-spline curve approximation. We present a new constrained active B-spline curve model based on the minimum mean square error (MMSE) criterion, and an iterative algorithm for selecting the “best” segment border points for each B-spline curve. The second part of the paper describes a method for simultaneous object tracking and affine parameter estimation using the approximate curves and profiles. We propose a novel B-spline point assignment algorithm which incorporates the significant corners for interpolating corresponding points on the two curves to be compared. A gradient-based algorithm is presented for simultaneously tracking object curves, and estimating the associated translation, rotation and scaling parameters. The performance of each proposed method is evaluated using still images and image sequences containing simple objects     

带最多独立形状参数的三阶三次均匀B样条曲线

构造了三阶三次等距结点的多项式B样条参数曲线,给出了de Boor控制顶点与分段三次Bézier控制顶点的关系式。该曲线具有一些类似于二次B样条曲线的性质：关于参变量为C¹连续,每个样条区间上的曲线由三个de Boor控制顶点的线性组合表示,具有仿射变换下的不变性,包含了二次均匀B样条曲线等。还具有形状可调性质：调配函数中含有形状参数,具有明显的几何意义,可用于调控曲线的形状或变形。给出了其具有凸包性、对de Boor控制多边形保形性等性质及其条件,讨论了形状参数对曲线形状的影响。     

Bézier样条曲线的近似弧长参数化方法

提出了Bézier样条曲线近似弧长参数化的方法及相应的算法。通过求出曲线近似二分之一弧长的点及其相应的参数值,可将曲线分割为两条Bézier样条曲线。这两条曲线的弧长近似相等,因此让它们带有相同的权1。对新生成的Bézier样条曲线不断重复上述工作,最终得到一条由多条Bézier样条曲线所构成的新的曲线。将这多条Bézier样条曲线合并为一条Bézier样条曲线,进而通过节点插入技术将其转化为B样条形式的曲线以便得到全局参数,其中各段Bézier曲线在全局参数域中所占子区间的长度与它们所具有的权成比例,这样便得到一条近似弧长参数化曲线。     

曲线的整数型生成算法

本文提出了一个用光栅显示器或数字化绘图仪等显示设备中选择曲线上最佳点的通过算法，该算法由几部分组成，分别对应曲线的不同走向段，其最大的特点是可以根据实际曲线的走向，在算法的各部分实现自动跳动，由此算法可生成所有常用曲线，本文给出Ｂｅｚｉｅｒ曲线和Ｂ样条曲线的生成算法，这些算法选择距离实际曲线最近的网格点，并且只有整数运算。     

C2 interpolation of spatial data subject to arc-length constraints using Pythagorean–hodograph quintic splines

In order to reconstruct spatial curves from discrete electronic sensor data, two alternative C² Pythagorean–hodograph (PH) quintic spline formulations are proposed, interpolating given spatial data subject to prescribed constraints on the arc length of each spline segment. The first approach is concerned with the interpolation of a sequence of points, while the second addresses the interpolation of derivatives only (without spatial localization). The special structure of PH curves allows the arc-length conditions to be expressed as algebraic constraints on the curve coefficients. The C² PH quintic splines are thus defined through minimization of a quadratic function subject to quadratic constraints, and a close starting approximation to the desired solution is identified in order to facilitate efficient construction by iterative methods. The C² PH spline constructions are illustrated by several computed examples.     

A class of general quartic spline curves with shape parameters

With a support on four consecutive subintervals, a class of general quartic splines are presented for a non-uniform knot vector. The splines have C² continuity at simple knots and include the cubic non-uniform B-spline as a special case. Based on the given splines, piecewise quartic spline curves with three local shape parameters are given. The given spline curves can be C²∩G³ continuous by fixing some values of the curve?s parameters. Without solving a linear system, the spline curves can also be used to interpolate sets of points with C² continuity. The effects of varying the three shape parameters on the shape of the quartic spline curves are determined and illustrated.     

形状可调的5次组合样条及其参数选择

目的 为了克服3次参数B样条在形状调整与局部性方面的不足,提出带参数的5次多项式组合样条。方法 首先构造一组带参数的5次多项式基函数;然后采用与3次B样条曲线相同的组合方式定义带参数的5次多项式组合样条曲线,并讨论基于能量优化法的5次组合样条曲线参数最佳取值问题;最后定义相应的组合样条曲面,并研究利用粒子群算法求解曲面的最佳参数取值。结果 5次组合样条不仅继承了3次B样条的诸多性质,而且还比3次B样条具有更强的局部性及形状可调性。由于5次组合样条仍为多项式模型,因此方程结构相对较为简单,符合实际工程的需要。利用能量优化法可获得光顺的5次组合样条曲线与曲面。结论 所提出5次多项式组合样条克服了3次参数B样条在形状调整与局部性方面的不足,是一种实用的自由曲线曲面造型方法。     

A locally controllable spline with tension for interactive curve design

We describe a new type of parametrically defined space curve. The parameters which define these curves allow for the convenient control over local shape attributes while maintaining global second order geometric continuity. The coordinate functions are defined by piecewise segments of rational functions, each segment being the ratio of cubic polynomials and a common quadratic polynomial. Each curve segment is a planar curve and where two segments meet the curvature is zero. This simple mathematical representation permits these curves to be efficiently manipulated and displayed.