基于D-H参数的爬壁机器人吸附控制系统设计

传统爬壁机器人吸附参量存在同步不对称的问题,导致爬壁机器人吸附控制系统输出控制量精度降低,影响机器人整体控制效果;为了解决爬壁机器人吸附参量不对称问题,提出基于D-H参数的爬壁机器人吸附控制系统设计;基于D-H参数特点,设计系统总体框架,框架共分为硬件与软件两部分;硬件主要利用动态陀螺仪控制器控制处理指令数据,完成处理模块设计;通过无线控制遥感器KJ-F6000X-T6实现控制模块设计;软件部分采用与D-H参数相关的算法对控制程序进行设计;通过实验对比数据表明:提出设计系统具有同步爬壁机器人吸附参量对称性,单次控制量、双次控制量、多次控制量系数分别为0.7、0.6、0.5,符合控制系数标准范围,能够提升系统控制量输出精度。     

A high precision visual localization sensor and its working methodology for an indoor mobile robot

To overcome the shortcomings of existing robot localization sensors, such as low accuracy and poor robustness, a high precision visual localization system based on infrared-reflective artificial markers is designed and illustrated in detail in this paper. First, the hardware system of the localization sensor is developed. Secondly, we design a novel kind of infrared-reflective artificial marker whose characteristics can be extracted by the acquisition and processing of the infrared image. In addition, a confidence calculation method for marker identification is proposed to obtain the probabilistic localization results. Finally, the autonomous localization of the robot is achieved by calculating the relative pose relation between the robot and the artificial marker based on the perspective-3-point (P3P) visual localization algorithm. Numerous experiments and practical applications show that the designed localization sensor system is immune to the interferences of the illumination and observation angle changes. The precision of the sensor is ±1.94 cm for position localization and ±1.64? for angle localization. Therefore, it satisfies perfectly the requirements of localization precision for an indoor mobile robot.     

基于自抗扰控制的机器人定位策略

机器人定位即需根据传感器测量对自身位置进行估计. 由于机器人系统模型的复杂非线性, 工况环境中的不确定干扰, 定位结果不可避免地会受到系统内外扰动的影响. 现有的定位算法往往仅能依赖模型或传感配置以及算法自身的鲁棒性被动抗扰, 这使得定位系统的抗扰能力有限、应用场景受限. 本文基于自抗扰控制思想提出一种 能够主动补偿系统内外扰动的机器人定位策略. 该策略将系统中所有能够影响最终定位结果的不确定因素统一视为总扰动, 并设计扩张状态观测器实现对总扰动的观测, 在此基础上构建控制器补偿总扰动影响, 以使定位结果更加准确. 与传统的定位抗扰策略相比, 本文所提出的抗扰定位策略并不依赖于模型或特定的传感配置, 能够处理任意有界的扰动类型, 理论上能够成为定位抗干扰的终极解决路径. 最后, 基于李雅普诺夫理论证明了系统的稳定性. 仿真和实车实验验证了本文提出的基于自抗扰控制的机器人定位策略能够有效地观测系统总扰动, 并补偿扰动影响, 提高定位结果的准确度.     

Information-theoretic Approaches Based on Sequential Monte Carlo to Collaborative Distributed Sensors for Mobile Robot Localization

We consider the Sequential Monte Carlo (SMC) method for Bayesian inference applied to the problem of information-theoretic distributed sensor collaboration in complex environments. The robot kinematics and sensor observation under consideration are described by nonlinear models. The exact solution to this problem is prohibitively complex due to the nonlinear nature of the system. The SMC method is, therefore, employed to track the probabilistic kinematics of the robot and to make the corresponding Bayesian estimates and predictions. To meet the specific requirements inherent in distributed sensors, such as low-communication consumption and collaborative information processing, we propose a novel SMC solution that makes use of the particle filter technique for data fusion, and the density tree representation of the a posterior distribution for information exchange between sensor nodes. Meanwhile, an efficient numerical method is proposed for approximating the information utility in sensor selection. A further experiment, obtained with a real robot in an indoor environment, illustrates that under the SMC framework, the optimal sensor selection and collaboration can be implemented naturally, and significant improvement in localization accuracy is achieved when compared to conventional methods using all sensors.     

Open-hardware e-puck Linux extension board for experimental swarm robotics research

In this paper we describe the implementation of a Linux extension board for the e-puck educational mobile robot, designed to enhance the computation, memory and networking performance of the robot at very low cost. The extension board is based on a 32-bit ARM9 microprocessor and provides wireless network support. The ARM9 extension board runs in parallel with the dsPIC microprocessor on the e-puck motherboard with communication between the two via an SPI bus. The extension board is designed to handle computationally intensive image processing, wireless communication and high-level intelligent robot control algorithms, while the dsPIC handles low-level sensor interfacing, data processing and motor control. The extension board runs an embedded Linux operating system, along with a Debian-based port of the root file system stored in a Micro SD card. The extended e-puck robot platform requires minimal effort to integrate the well-known open-source robot control framework Player and, when placed within a TCP/IP networked infrastructure, provides a powerful and flexible platform for experimental swarm robotics research.     

一种低计算量移动机器人自定位方法

移动机器人定位问题就是通过传感器数据来确定自己的位姿。本文介绍了几种基于概率的自定位算法。针对蒙特卡罗定位算法需要精确概率模型以及计算量大的问题,本文提出了一种均匀蒙特卡罗算法。该算法假设运动模型和感知模型都是均匀分布的,采样点在运动过程中不变,而且不需要精确的概率模型,计算量小,稳定性高。试验表朗,该算法能在室内环境下很好的对机器人定位。     

Optimal sensor scheduling for resource-constrained localization of mobile robot formations

This paper addresses the problem of resource allocation in formations of mobile robots localizing as a group. Each robot receives measurements from various sensors that provide relative (robot-to-robot) and absolute positioning information. Constraints on the sensors' bandwidth, as well as communication and processing requirements, limit the number of measurements that are available or can be processed at each time step. The localization uncertainty of the group, determined by the covariance matrix of the equivalent continuous-time system at steady state, is expressed as a function of the sensor measurements' frequencies. The trace of the weighted covariance matrix is selected as the optimization criterion, under linear constraints on the measuring frequency of each sensor and the cumulative rate of the extended Kalman filter updates. This formulation leads to a convex optimization problem (semidefinite program) whose solution provides the sensing frequencies, for each sensor on every robot, required in order to maximize the positioning accuracy of the group. Simulation and experimental results are presented that demonstrate the applicability of this method and provide insight into the properties of the resource-constrained cooperative localization problem.     

Simultaneous localization and mapping using the Geometric Projection Filter and correspondence graph matching

A common way of localization in robotics is using triangulation on a system composed of a sensor and some landmarks (which can be artificial or natural). First, when no identifying marks are set on the landmarks, their identification by a robust algorithm is a complex problem which may be solved using correspondence graphs. Secondly, when the localization system has no a priori information about its environment, it has to build its own map in parallel with estimating its position, a problem known as simultaneous localization and mapping (SLAM). Recent works have proposed to solve this problem based on building a map made of invariant features. This paper describes the algorithms and data structure needed to deal with landmark matching, robot localization and map building in a single efficient process, unifying the previous approaches. Experimental results are presented using an outdoor robot car equipped with a two-dimensional scanning laser sensor.     

Active Visual Perception for Mobile Robot Localization

Localization is a key issue for a mobile robot, in particular in environments where a globally accurate positioning system, such as GPS, is not available. In these environments, accurate and efficient robot localization is not a trivial task, as an increase in accuracy usually leads to an impoverishment in efficiency and viceversa. Active perception appears as an appealing way to improve the localization process by increasing the richness of the information acquired from the environment. In this paper, we present an active perception strategy for a mobile robot provided with a visual sensor mounted on a pan-tilt mechanism. The visual sensor has a limited field of view, so the goal of the active perception strategy is to use the pan-tilt unit to direct the sensor to informative parts of the environment. To achieve this goal, we use a topological map of the environment and a Bayesian non-parametric estimation of robot position based on a particle filter. We slightly modify the regular implementation of this filter by including an additional step that selects the best perceptual action using Monte Carlo estimations. We understand the best perceptual action as the one that produces the greatest reduction in uncertainty about the robot position. We also consider in our optimization function a cost term that favors efficient perceptual actions. Previous works have proposed active perception strategies for robot localization, but mainly in the context of range sensors, grid representations of the environment, and parametric techniques, such as the extended Kalman filter. Accordingly, the main contributions of this work are: i) Development of a sound strategy for active selection of perceptual actions in the context of a visual sensor and a topological map; ii) Real time operation using a modified version of the particle filter and Monte Carlo based estimations; iii) Implementation and testing of these ideas using simulations and a real case scenario. Our results indicate that, in terms of accuracy of robot localization, the proposed approach decreases mean average error and standard deviation with respect to a passive perception scheme. Furthermore, in terms of efficiency, the active scheme is able to operate in real time without adding a relevant overhead to the regular robot operation.     

Cooperative localization for disconnected sensor networks and a mobile robot in friendly environments

Localization for a disconnected sensor network is highly unlikely to be achieved by its own sensor nodes, since accessibility of the information between any pair of sensor nodes cannot be guaranteed. In this paper, a mobile robot (or a mobile sensor node) is introduced to establish correlations among sparsely distributed sensor nodes which are disconnected, even isolated. The robot and the sensor network operate in a friendly manner, in which they can cooperate to perceive each other for achieving more accurate localization, rather than trying to avoid being detected by each other. The mobility of the robot allows for the stationary and internally disconnected sensor nodes to be dynamically connected and correlated. On one hand, the robot performs simultaneous localization and mapping (SLAM) based on the constrained local submap filter (CLSF). The robot creates a local submap composed of the sensor nodes present in its immediate vicinity. The locations of these nodes and the pose (position and orientation angle) of the robot are estimated within the local submap. On the other hand, the sensor nodes in the submap estimate the pose of the robot. A parallax-based robot pose estimation and tracking (PROPET) algorithm, which uses the relationship between two successive measurements of the robot's range and bearing, is proposed to continuously track the robot's pose with each sensor node. Then, tracking results of the robot's pose from different sensor nodes are fused by the Kalman filter (KF). The multi-node fusion result are further integrated with the robot's SLAM result within the local submap to achieve more accurate localization for the robot and the sensor nodes. Finally, the submap is projected and fused into the global map by the CLSF to generate localization results represented in the global frame of reference. Simulation and experimental results are presented to show the performances of the proposed method for robot-sensor network cooperative localization. Especially, if the robot (or the mobile sensor node) has the same sensing ability as the stationary sensor nodes, the localization accuracy can be significantly enhanced using the proposed method.     

Autonomous Acquisition of Seam Coordinates for Arc Welding Robot Based on Visual Servoing

Autonomous acquisition of seam coordinates is a key technology for developing advanced welding robot. This paper describes a position-based visual servo system for robotic seam tracking, which is able to autonomously acquire the seam coordinates of the planar butt joint in the robot base frame and plan the optimal camera angle before welding. A six-axis industrial robot is used in this system, which has an interface for communicating with the master computer. The developed visual sensor device is briefly presented that allows the charge-coupled device (CCD) cameras to rotate about the torch. A set of robust image processing algorithms are proposed so that no special requirements of light source are needed in this system. The feedback errors of this servo system are defined according to the characteristics of the seam image, and the robust tracking controller is developed. Both the image processing program and tracking control program run on the master computer. The experimental results on straight line seam and curve seam show that the accuracy of the seam coordinates acquired with this method is more adequate for high quality welding process.     

Reliable and efficient landmark-based localization for mobile robots

This paper describes an efficient and robust localization system for indoor mobile robots and AGVs. The system utilizes a sensor that measures bearings to artificial landmarks, and an efficient triangulation method. We present a calibration method for the system components and overcome typical problems for sensors of the mentioned type, which are localization in motion and incorrect identification of landmarks. The resulting localization system was tested on a mobile robot. It consumes less than 4% of a Pentium4 3.2 GHz processing power while providing an accurate and reliable localization result every 0.5 s. The system was successfully incorporated within a real mobile robot system which performs many other computational tasks in parallel.     

A statistical estimation method for segmentation of sonar range data

In this paper, we describe how to deal with an important sensorial activity that ultrasonic echo-locating systems for mobile robot navigation have often to perform, namely the extraction of straight line segments from range data and the accurate localization of the corresponding planar targets. It is commonplace that range data segmentation starts with using least squares interpolation algorithms for obtaining straight line segments: it is our goal to prove that caution must be called for in order to avoid somewhat misleading results. The case study concerns the use of a linear array formed by three ultrasonic transducers in a 2D specular environment composed of line and point acoustic targets.The segmentation algorithm we propose is subdivided into two functionally distinct modules, namely identification and localization. The identification module is based on a sequential hypothesis testing between alternative hypotheses that explain the sonar range data as originated from line or point targets. With regard to the localization module, we demonstrate that widely used approaches to sensor modeling are, to some extent, deceptively simple: the estimation accuracy for the localization of planar objects may be decreased by the inability of some traditional sonar sensor models to take properly into account the specularity of reflections. A physically based model of acoustic range sensors acting in specular environments allows us to design a localization module which is capable of producing accurate and unbiased estimates of the parameters of a planar geometric feature.The proposed theoretical framework is validated by the results of some experiments carried out with a spatial locating system consisting of a rotating linear array of three ultrasonic transducers.     

A New Mobile Robot Toolbox for Matlab

In this study, a wheeled mobile robot navigation toolbox for Matlab is presented. The toolbox includes algorithms for 3D map design, static and dynamic path planning, point stabilization, localization, gap detection and collision avoidance. One can use the toolbox as a test platform for developing custom mobile robot navigation algorithms. The toolbox allows users to insert/remove obstacles to/from the robot’s workspace, upload/save a customized map and configure simulation parameters such as robot size, virtual sensor position, Kalman filter parameters for localization, speed controller and collision avoidance settings. It is possible to simulate data from a virtual laser imaging detection and ranging (LIDAR) sensor providing a map of the mobile robot’s immediate surroundings. Differential drive forward kinematic equations and extended Kalman filter (EKF) based localization scheme is used to determine where the robot will be located at each simulation step. The LIDAR data and the navigation process are visualized on the developed virtual reality interface. During the navigation of the robot, gap detection, dynamic path planning, collision avoidance and point stabilization procedures are implemented. Simulation results prove the efficacy of the algorithms implemented in the toolbox.     

A real-time super-resolution robot audition system that improves the robustness of simultaneous speech recognition

This study addresses a framework for a robot audition system, including sound source localization (SSL) and sound source separation (SSS), that can robustly recognize simultaneous speeches in a real environment. Because SSL estimates not only the location of speakers but also the number of speakers, such a robust framework is essential for simultaneous speech recognition. Moreover, improvement in the performance of SSS is crucial for simultaneous speech recognition because the robot has to recognize the individual source of speeches. For simultaneous speech recognition, current robot audition systems mainly require noise-robustness, high resolution, and real-time implementation. Multiple signal classification (MUSIC) based on standard Eigenvalue decomposition (SEVD) and Geometric-constrained high-order decorrelation-based source separation (GHDSS) are techniques utilizing microphone array processing, which are used for SSL and SSS, respectively. To enhance SSL robustness against noise while detecting simultaneous speeches, we improved SEVD-MUSIC by incorporating generalized Eigenvalue decomposition (GEVD). However, GEVD-based MUSIC (GEVD-MUSIC) and GHDSS mainly have two issues: (1) the resolution of pre-measured transfer functions (TFs) determines the resolution of SSL and SSS and (2) their computational cost is expensive for real-time processing. For the first issue, we propose a TF-interpolation method integrating time-domain-based and frequency-domain-based interpolation. The interpolation achieves super-resolution robot audition, which has a higher resolution than that of the pre-measured TFs. For the second issue, we propose two methods for SSL: MUSIC based on generalized singular value decomposition (GSVD-MUSIC) and hierarchical SSL (H-SSL). GSVD-MUSIC drastically reduces the computational cost while maintaining noise-robustness for localization. In addition, H-SSL reduces the computational cost by introducing a hierarchical search algorithm instead of using a greedy search for localization. These techniques are integrated into a robot audition system using a robot-embedded microphone array. The preliminary experiments for each technique showed the following: (1) The proposed interpolation achieved approximately 1-degree resolution although the TFs are only at 30-degree intervals in both SSL and SSS; (2) GSVD-MUSIC attained 46.4 and 40.6% of the computational cost compared to that of SEVD-MUSIC and GEVD-MUSIC, respectively; (3) H-SSL reduced 71.7% of the computational cost to localize a single speaker. Finally, the robot audition system, including super-resolution SSL and SSS, is applied to robustly recognize four sources of speech occurring simultaneously in a real environment. The proposed system showed considerable performance improvements of up to 7% for the average word correct rate during simultaneous speech recognition, especially when the TFs were at more than 30-degree intervals.     

Monocular Vision for Mobile Robot Localization and Autonomous Navigation

This paper presents a new real-time localization system for a mobile robot. We show that autonomous navigation is possible in outdoor situation with the use of a single camera and natural landmarks. To do that, we use a three step approach. In a learning step, the robot is manually guided on a path and a video sequence is recorded with a front looking camera. Then a structure from motion algorithm is used to build a 3D map from this learning sequence. Finally in the navigation step, the robot uses this map to compute its localization in real-time and it follows the learning path or a slightly different path if desired. The vision algorithms used for map building and localization are first detailed. Then a large part of the paper is dedicated to the experimental evaluation of the accuracy and robustness of our algorithms based on experimental data collected during two years in various environments.     

基于无线传感器网络的机器人定位跟踪研究

针对基于无线传感器网络的机器人定位提出了一种分段极大似然质心算法。将质心法引入极大似然估计算法中,通过计算已预测结果的质心提高目标位置的预测精度。考虑到WSN系统的超声定位实时性较差,采用扩展卡尔曼滤波算法将WSN系统改进定位算法与机器人航位推算进行融合以跟踪机器人位姿,从而提高了定位精度和系统动态性能。仿真结果表明：在不同锚节点个数和不同测距误差条件下,分段极大似然质心算法均能取得良好的定位效果;采用扩展卡尔曼滤波算法的数据融合,进一步提高了机器人轨迹跟踪的精度。     

Sensor planning for mobile robot localization using Bayesian network inference

We propose a new method of sensor planning for mobile robot localization using Bayesian network inference. Since we can model causal relations between situations of the robot's behavior and sensing events as nodes of a Bayesian network, we can use the inference of the network for dealing with uncertainty in sensor planning and thus derive appropriate sensing actions. In this system we employ a multi-layered-behavior architecture for navigation and localization. This architecture effectively combines mapping of local sensor information and the inference via a Bayesian network for sensor planning. The mobile robot recognizes the local sensor patterns for localization and navigation using a learned regression function. Since the environment may change during the navigation and the sensor capability has limitations in the real world, the mobile robot actively gathers sensor information to construct and reconstruct a Bayesian network, and then derives an appropriate sensing action which maximizes a utility function based on inference of the reconstructed network. The utility function takes into account belief of the localization and the sensing cost. We have conducted some simulation and real robot experiments to validate the sensor planning system.     

Sensor Planning for Mobile Robot Localization---A Hierarchical Approach Using a Bayesian Network and a Particle Filter

In this paper, we propose a hierarchical approach to solving sensor planning for the global localization of a mobile robot. Our system consists of two subsystems: a lower layer and a higher layer. The lower layer uses a particle filter to evaluate the posterior probability of the localization. When the particles converge into clusters, the higher layer starts particle clustering and sensor planning to generate an optimal sensing action sequence for the localization. The higher layer uses a Bayesian network for probabilistic inference. The sensor planning takes into account both localization belief and sensing cost. We conducted simulations and actual robot experiments to validate our proposed approach.     

一种普适机器人系统同时定位、标定与建图方法

机器人定位、传感器网络标定与环境建图是普适机器人系统中三个相互耦合的基本问题, 其有效解决是普适机器人系统提供高效智能服务的前提. 本文提出了普适机器人系统同时机器人定位、传感器网络标定与环境建图的概念, 通过分析三者之间的耦合关系, 给出同时定位、标定与建图问题的联合条件概率表示, 基于贝叶斯公式和马尔科夫特性将其分解为若干可解项, 并借鉴Rao-Blackwellized粒子滤波的思想分别求解. 首先, 联合传感器网络对机器人的观测、机器人对已定位环境特征的观测以及机器人自身控制量,设计了位姿粒子的采样提议分布和权值更新公式; 其次, 联合传感器网络对机器人运动轨迹及已定位环境特征的观测,设计了传感器网络标定的递推公式; 然后, 联合传感器网络和机器人对(已定位或新发现)环境特征的观测,设计了环境建图的递推公式. 给出了完整的同时定位、标定与建图算法, 并通过仿真实验验证了该算法的有效性.