A new a‐Si:H TFT pixel circuit employing data‐reflected negative‐bias annealing for a stable and uniform AMOLED

Abstract— A new a‐Si:H pixel circuit to reduce the VTH degradation of driving a‐Si:H thin‐film transistors (TFTs) by data‐reflected negative‐bias annealing (DRNBA) is presented. The new pixel circuit compensates VTH variation induced by non‐uniform degradation of each a‐Si:H pixel due to various electrical stress. The proposed pixel circuit was verified by SPICE simulations. Although the VTH of the driving a‐Si:H TFT varies from 2.5 to 3.0 and 3.5 V, the organic light‐emitting diode (OLED) current changes by only 1.5 and 2.8% in the emission period, respectively. During the negative‐bias annealing period, the negative VGS is applied to the driving TFT by using its own data signal. It is expected that the VTH shift of the driving TFT can be effectively reduced and the VTH shift can be compensated for in our new pixel circuit, which can contribute to a stable and uniform image from an a‐Si:H TFT active‐matrix OLED.     

Vt Compensated voltage‐data a‐Si TFT AMOLED pixel circuits

Abstract— Active‐matrix organic light‐emitting‐diode (AMOLED) displays are now entering the marketplace. The use of a thin‐film‐transistor (TFT) active matrix allows OLED displays to be larger in size, higher in resolutions and lower in power dissipation than is possible using a conventional passive matrix. A number of TFT active‐matrix pixel circuits have been developed for luminance control, while correcting for initial and electrically stressed TFT parameter variations. Previous circuits and driving methods are reviewed. A new driving method is presented in which the threshold‐voltage (V_t) compensation performance, along with various circuit improvements for amorphous‐silicon (a‐Si) TFT pixel circuits using voltage data, are discussed. This new driving method along with various circuit improvements is demonstrated in a state‐of‐the‐art 20‐in. a‐Si TFT AMOLED HDTV.     

Letter: A new compensation pixel circuit with metal oxide thin‐film transistors for active‐matrix organic light‐emitting diode displays

This paper presents a novel compensation pixel circuit for active‐matrix organic light‐emitting diode displays, in which the coupling effect mask technology is developed to compensate the threshold voltage of driving thin‐film transistor whether it is positive or negative. Twenty discrete compensation pixel circuits have been fabricated by In‐Zn‐O thin‐film transistors process. It is measured that the non‐uniformity of the proposed pixel circuit is significantly reduced with an average value of 8.6%. Furthermore, the organic light‐emitting diode emission current remains constant during 6 h continuous operation, which also confirms the validity of the proposed pixel circuit.     

High‐speed pixel circuits for large‐sized 3‐D AMOLED displays

Abstract— Large‐sized active‐matrix organic light‐emitting diode (AMOLED) displays require high‐frame‐rate driving technology to achieve high‐quality 3‐D images. However, higher‐frame‐rate driving decreases the time available for compensating Vth in the pixel circuit. Therefore, a new method needs to be developed to compensate the pixel circuit in a shorter time interval. In this work, image quality of a 14‐in. quarter full‐high‐definition (qFHD) AMOLED driven at a frame rate of over 240 Hz was investigated. It was found that image degradation is related to the time available for compensation of the driving TFT threshold voltage. To solve this problem, novel AMOLED pixel circuits for high‐speed operation are proposed to compensate threshold‐voltage variation at frame rates above 240 Hz. When Vth is varied over ±1.0 V, conventional pixel circuits showed current deviations of 22.8 and 39.8% at 240 and 480 Hz, respectively, while the new pixel circuits showed deviations of only 2.6 and 5.4%.     

Investigation of the hysteresis phenomenon of an a‐Si:H TFT at an elevated temperature for AMOLED displays

Abstract— The temperature dependence of the hysteresis of an a‐Si:H TFT has been investigated. An a‐Si:H TFT pixel driving scheme has been proposed and investigated. This scheme can eliminate changes in the organic light‐emitting diode (OLED) current caused by hysteresis of an a‐Si:H TFT. The VTH of the a‐Si:H TFT was changed according to the gate‐voltage sweep direction because of the hysteresis of the a‐Si:H TFT. The variation of VTH for a a‐Si:H TFT decreased from 0.41 to 0.17 V at an elevated temperature of 60°C because the sub‐threshold slope (s‐slope) of the a‐Si:H TFT, in the reverse voltage sweep direction, increased more than in the forward voltage sweep direction due to a greater increase in the initial electron trapped charges than the hole charges. Although the OLED current variation caused by hysteresis decreased (～14%) as the temperature increased, the error in the OLED current needed to be improved in order to drive the pixel circuit of AMOLED displays. The proposed pixel circuit can apply the reset voltage (?10 V) before the data voltage for the present frame that was written to fix the sweep direction of the data voltage. The variation in the OLED current caused by hysteresis of the a‐Si:H TFT was eliminated by the fixed voltage sweep direction in the proposed pixel circuit regardless of operating temperature.     

A new threshold‐voltage compensation technique of poly‐Si TFTs for AMOLED display pixel circuits

Abstract— A new threshold‐voltage compensation technique for polycrystal line‐silicon thin‐film transistors (poly‐Si TFTs) used in active‐matrix organic light‐emitting‐diode (AMOLED) display pixel circuits is presented. The new technique was applied to a conventional 2‐transistor—1‐capacitor (2T1C) pixel circuit, and a new voltage‐programmed pixel circuit (VPPC) is proposed. Theoretically, the proposed pixel is the fastest pixel with threshold‐voltage compensation reported in the literature because of the new compression technique implemented with a static circuit block, which does not affect the response time of the conventional 2T1C pixel circuit. Furthermore, the new pixel exhibits all the other advantages of the 2T1C pixel, such as the simplicity of the peripheral drivers and improves other characteristics, such as its behavior in the temperature variations. The verification of the proposed pixel is made through simulations with HSpice. In order to obtain realistic simulations, device parameters were extracted from fabricated low‐temperature poly‐Si (LTPS) TFTs.     

New pixel circuits for controlling threshold voltage by back‐gate bias voltage using crystalline oxide semiconductor FETs

We devised a threshold voltage compensation pixel circuit using back‐gate bias voltage. Variation in threshold voltages can be reduced to 10% in simulation while improving the saturation characteristics of a driving transistor. The pixel circuit can compensate not only threshold variation but also mobility variation. We fabricated a 5.29‐in Quad‐VGA organic light emitting diode display using this pixel circuit.     

Current programming pixel circuit and data‐driver design for active‐matrix organic light‐emitting diodes

Abstract— We propose a new pixel design for active‐matrix organic light‐emitting diodes (AMOLEDs) employing five polycrystalline thin‐film transistors (poly‐Si TFTs) and one capacitor, which decreases the data current considerably in order to reduce the charging time compared with that of conventional current‐mirror structures. Also, the new pixel design compensates the threshold‐voltage degradation of OLEDs caused by continuous operation and the non‐uniformity of poly‐Si TFTs due to excimer‐laser annealing. The proposed pixel circuit was verified by SPICE simulation, based on measured TFT and OLED characteristics. We also propose current‐data‐driver circuitry that reduces the number of shift‐register signals for addressing the current data driver by one‐half.     

An active‐matrix organic light‐emitting‐diode pixel circuit for the compensation of I × R voltage drop in power line

Abstract— A new voltage‐driving active‐matrix organic light‐emitting diode (AMOLED) pixel circuit is proposed to improve the display image‐quality of AMOLED displays. Because OLEDs are current‐driven devices, the I × R voltage drop in the power lines is evitable. Accordingly, the I × R voltage‐drop compensation scheme should be included in the pixel‐driving method when a voltage‐compensation method is used. The proposed pixel was designed for the compensation of an I × R voltage drop in the power lines as well as for the compensation of the threshold‐voltage non‐uniformity of low‐temperature polycrystalline‐silicon thin‐film transistors (LTPS TFTs). In order to verify the compensation ability of the proposed pixel, SPICE simulation was performed and compared with those of other conventional pixels. When the Vss voltage varies from 0 to 1 V, the drain current of the proposed pixel decreased by under 1% while that of conventional Vth compensation methods without Vss compensation decreased by over 60%. 2.2‐in. QCIF⁺ full‐color AMOLED displays, which employ the proposed pixel, have been also developed. It was verified by comparison of the display image quality with a conventional panel that our proposed panel successfully overcame the voltage‐drop problems in the power lines.     

Threshold‐voltage‐compensation methods for AMOLED pixel and analog buffer circuits

Abstract— New pixel‐circuit designs for active‐matrix organic light‐emitting diodes (AMOLEDs) and a new analog buffer circuit for the integrated data‐driver circuit of active‐matrix liquid‐crystal displays (AMLCDs) and AMOLEDs, based on low‐temperature polycrystalline‐silicon thin‐film transistors (LTPS‐TFTs), were proposed and verified by SPICE simulation and measured results. Threshold‐voltage‐compensation pixel circuits consisting of LTPS‐TFTs, an additional control signal line, and a storage capacitor were used to enhance display‐image uniformity. A diode‐connected concept is used to calibrate the threshold‐voltage variation of the driving TFT in an AMOLED pixel circuit. An active load is added and a calibration operation is applied to study the influences on the analog buffer circuit. The proposed circuits are shown to be capable of minimizing the variation from the device characteristics through the simulation and measured results.     

A digitally driven pixel circuit with current compensation for AMOLED microdisplays

A novel digitally driven pixel circuit for active‐matrix organic light‐emitting diode (OLED) microdisplays is proposed and evaluated. This circuit supports both pulse width modulation and pulse density modulation digital drive approaches. Only three transistors and one capacitor are required per pixel for the proposed circuit. A current mirror is used to compensate for the pixel current changes that occur because of the degradation of the OLEDs over time. The compensation current depends on the potential of the common cathode, the properties of the current mirror, and the Width/Length (W/L) ratio of the drive transistor. The proposed digital pixel circuit also has advantages in circuit layout compared with analog pixel circuits.     

Simple pixel circuits for high resolution and high image quality organic light emitting diode‐on‐silicon microdisplays with wide data voltage range

Two simple pixel circuits are proposed for high resolution and high image quality organic light‐emitting diode‐on‐silicon microdisplays. The proposed pixel circuits achieve high resolution due to simple pixel structure comprising three n‐type MOSFETs and one storage capacitor, which are integrated into a unit subpixel area of 3 × 9 µm² using a 90 nm CMOS process. The proposed pixel circuits improve image quality by compensating for the threshold voltage variation of the driving transistors and extending the data voltage range. To verify the performance of the proposed pixel circuits, the emission currents of 24 pixel circuits are measured. The measured emission current deviation error of the proposed pixel circuits A and B ranges from ?2.59% to +2.78%, and from ?1.86% to +1.84%, respectively, which are improved from the emission current deviation error of the conventional current‐source type pixel circuit when the threshold voltage variation is not compensated for, which ranges from ?14.87% to +14.67%. In addition, the data voltage ranges of the proposed pixel circuits A and B are 1.193 V and 1.792 V, respectively, which are 2.38 and 3.57 times wider than the data voltage range of the conventional current‐source type pixel circuit of 0.501 V.     

Pixel structures using the negative feedback method for high‐resolution active matrix organic light‐emitting diode displays

Novel two pixel structures are proposed for high‐resolution active matrix organic light‐emitting diode displays. The proposed two pixels (pixel structures A and B) use the negative feedback method for high‐resolution displays that requires to have small‐sized storage capacitance. The proposed pixel structures A and B improve the luminance uniformity by reducing the voltage distortion in the storage capacitor. However, the proposed pixel structure A is vulnerable to the organic light‐emitting diode (OLED) degradation because the anode voltage of the OLED affects the emission current. In order to compensate the OLED degradation, the proposed pixel structure B stores the turn‐on voltage of OLEDs in the storage capacitor. The simulation results show that the emission current error of the proposed pixel structure B is improved by four times in comparison with the proposed pixel structure A when the OLED turn‐on voltage increases by 0.1 V. Also, the emission current error of the proposed pixel structure B when the threshold voltage of driving thin‐film transistors varies from ?2.2 to ?1.8 V is from ?0.69 least significant bit (LSB) to 0.13 LSB, which shows the excellent luminance uniformity. The proposed pixels are designed for 5.5‐in. full high‐definition displays.     

Modeling of threshold‐voltage‐shift dependency on drain bias in amorphous‐silicon thin‐film transistors in active‐matrix organic light‐emitting‐diode displays

Abstract— A theoretical model to interpret appearances of the threshold voltage shift in hydrogenated amorphous‐silicon (a‐Si:H) thin‐film transistors (TFTs) is developed to better understand the instability of a‐Si:H TFTs for the driving transistors in active‐matrix organic light‐emitting‐diode (AMOLED) displays. This model assumes that the defect creation at channel in a‐Si:H is proportional to the carrier concentration, leading to the defect density varying along the channel depending on the bias conditions. The model interprets a threshold‐voltage‐shift dependency on the drain‐stress bias. The model predicts the threshold voltage shift stressed under a given gate bias applying the drain saturation voltage is 66% of that with zero drain bias, and it even goes down to 50–60% of that when stressed by applying twice the drain saturation voltage.     

An AMOLED pixel circuit for high image quality of 1000 ppi mobile displays in AR and VR applications

In this paper, an active‐matrix organic light‐emitting diode pixel circuit is proposed to improve the image quality of 5.87‐in. mobile displays with 1000 ppi resolution in augmented and virtual reality applications. The proposed pixel circuit consisting of three thin‐film transistors (TFTs) and two capacitors (3T2C) employs a simultaneous emission driving method to reduce the number of TFTs and the emission current error caused by variations in threshold voltage (Vth) and subthreshold slope (SS) of the low‐temperature polycrystalline silicon TFTs. Using the simultaneous emission driving method, the compensation time is increased to 90 μs from 6.5 μs achieved in the conventional six TFTs and one capacitor (6T1C) pixel circuit. Consequently, the emission current error of the proposed 3T2C pixel circuit was reduced to ±3 least significant bit (LSB) from ±12 LSB at the 32nd gray level when the variations in both the Vth and SS are ±4σ. Moreover, both the crosstalk errors due to the parasitic capacitances between the adjacent pixel circuits and due to the leakage current were achieved to be less than ±1 LSB over the entire gray level. Therefore, the proposed pixel circuit is very suitable for active‐matrix organic light‐emitting diode displays requiring high image quality.     

Novel analog feedback current programming architecture compatible with 2‐transistor 1‐capacitor pixel for active matrix organic light‐emitting diode displays

A new feedback current programming architecture is described, which is compatible with active matrix organic light‐emitting diode (AMOLED) displays having the 2T1C pixel structure. The new pixel programming approach is compatible with all TFT technologies and can compensate for non‐uniformities in both threshold voltage and carrier mobility of the pixel OLED drive TFT. Based on circuit simulations, a pixel drive current of less than 10 nA can be programmed in less than 50 µ. This new approach can be implemented within an AMOLED external or integrated display data driver.     

A novel TFT‐OLED integration for OLED‐independent pixel programming in amorphous‐Si AMOLED pixels

Abstract— The direct voltage programming of active‐matrix organic light‐emitting‐diode (AMOLED) pixels with n‐channel amorphous‐Si (a‐Si) TFTs requires a contact between the driving TFT and the OLED cathode. Current processing constraints only permit connecting the driving TFT to the OLED anode. Here, a new “inverted” integration technique which makes the direct programming possible by connecting the driver n‐channel a‐Si TFT to the OLED cathode is demonstrated. As a result, the pixel drive current increases by an order of magnitude for the same data voltages and the pixel data voltage for turn‐on drops by several volts. In addition, the pixel drive current becomes independent of the OLED characteristics so that OLED aging does not affect the pixel current. Furthermore, the new integration technique is modified to allow substrate rotation during OLED evaporation to improve the pixel yield and uniformity. The new integration technique is important for realizing active‐matrix OLED displays with a‐Si technology and conventional bottom‐anode OLEDs.     

Amorphous‐oxide TFT backplane for large‐sized AMOLED TVs

Abstract— Amorphous‐oxide thin‐film‐transistor (TFT) arrays have been developed as TFT backplanes for large‐sized active‐matrix organic light‐emitting‐diode (AMOLED) displays. An amorphous‐IGZO (indium gallium zinc oxide) bottom‐gate TFT with an etch‐stop layer (ESL) delivered excel lent electrical performance with a field‐effect mobility of 21 cm²/V‐sec, an on/off ratio of >10⁸, and a subthreshold slope (SS) of 0.29 V/dec. Also, a new pixel circuit for AMOLED displays based on amorphous‐oxide semiconductor TFTs is proposed. The circuit consists of four switching TFTs and one driving TFT. The circuit simulation results showed that the new pixel circuit has better performance than conventional threshold‐voltage (VTH) compensation pixel circuits, especially in the negative state. A full‐color 19‐in. AMOLED display with the new pixel circuit was fabricated, and the pixel circuit operation was verified in a 19‐in. AMOLED display. The AMOLED display with a‐IGZO TFT array is promising for large‐sized TV because a‐IGZO TFTs can provide a large‐sized backplane with excellent uniformity and device reliability.     

A novel gate driver circuit for depletion‐mode a‐IGZO TFTs

In this paper, a novel gate driver circuit, which can achieve high reliability for depletion mode in a‐InGaZnO thin‐film transistors (TFTs), was proposed. To prevent the leakage current paths for Q node effectively, the new driving method was proposed by adopting the negative gate‐to‐source voltage (V_GS) value for pull‐down units. The results showed all the V_OUT voltage waveforms were maintained at VGH voltage despite depletion‐mode operation. The proposed circuit could also obtain stable V_OUT voltage when the threshold voltage for all TFTs was changed from ?6.5 to +11.5 V. Therefore, the circuit can achieve high reliability regardless of threshold voltage value for a‐IGZO TFTs. In addition, the output characteristics and total power consumption were shown for the alternating current (AC)–driven and direct current (DC)–driven methods based on 120‐Hz full‐HD graphics (1920 × 1080) display panel. The results showed that the AC‐driven method could achieve improved V_OUT characteristics compared with DC‐driven method since the leakage current path for Q node can be completely eliminated. Although power consumption of the AC‐driven method can be slightly increased compared with the DC‐driven method for enhancement mode, consumption can be lower when the operation has depletion‐mode characteristics by preventing a leakage current path for pull‐down units. Consequently, the proposed gate driver circuit can overcome the problems caused by the characteristics of a‐IGZO TFTs.     

Novel a‐Si:H TFT pixel circuit for electrically stable top‐anode light‐emitting AMOLEDs

Abstract— A novel pixel circuit for electrically stable AMOLEDs with an a‐Si:H TFT backplane and top‐anode organic light‐emitting diode is reported. The proposed pixel circuit is composed of five a‐Si:H TFTs, and it does not require any complicated drive ICs. The OLED current compensation for drive TFT threshold voltage variation has been verified using SPICE simulations.