Compact circularly polarized beam‐switching wireless power transfer system for ambient energy harvesting applications

In this work, we propose a circularly polarized (CP) beam‐switching wireless power transfer system for ambient energy harvesting applications operating at 2.4 GHz. Beam‐switching is achieved using a low profile, electrically small CP antenna array with four elements and a novel miniaturized 4× 4 butler matrix. The CP antenna is designed with an e‐shaped slot and four antennas. The CP antenna measures 0.32 λ₀× 0.32 λ₀× 0.006 λ₀ at 2.4 GHz. The antenna has a gain of 3 dBic and an axial ratio less than 3‐dB at 2.4 GHz. A linear antenna array consisting of four elements is designed with the CP antenna element with an inter‐element distance of 0.29 λ₀ . A 4× 4 butler matrix with miniaturized couplers and crossovers are used to feed the four antenna array elements. Based on the input port of excitation, the main beam of the antenna array is demonstrated to be switched to four directions: ?5°, 65°, ?55°, and 20°. A CP rectenna is used to demonstrate the wireless power transfer capability of the combination of the butler matrix and the CP‐antenna array. The rectenna consists of a Teo‐shaped CP antenna and a rectifier. The open circuit voltage at the output of the rectenna is found to peak value of 30 mV at ?3°, 61°, ?53°, and 17°. Thus a complete system for CP wireless power transfer including the power transmission system as well as the RF energy harvesting sensor is designed and experimentally verified.     

Design of miniaturized D‐band dual‐polarized dipole base station antenna based on coupling feeding

This article designs a coupling feeding miniaturized base station antenna. This base station antenna works in D‐band (2500‐2700 MHz). By introducing a bending structure to increase the current path of the dipole, the overall size of the dipole antenna can be reduced. The final design of antenna element size is only 36.8 × 36.8 mm² (0.32 × 0.32λ²). The simulation results show that the return loss of the two ports is greater than 23 dB, the isolation between the two ports is greater than 29 dB, the half‐power beamwidth of the antenna is 63° ± 1.5°, and the gain is greater than 9 dBi. The physical processing and simulation results are basically consistent, which prove the practicability of the dipole antenna. A broadband dipole antenna and this antenna are selected for array analysis. When it works in D‐band, the isolation of the antenna element designed in this article is better than that of the broadband dipole antenna.     

Wide‐angle scanning circular polarization phased array based on polarization rotation technology

A wide‐beam circular polarization (CP) antenna and a wide‐angle scanning phased array based on novel polarization rotation reflective surface (PRRS) are proposed. The CP wide‐beam pattern is obtained by the combination of the radiation wave from the patch antenna and the orthogonal reflected wave from the PRRS with a 90° phase difference. The proposed CP wide‐beam antenna obtains the patterns with the 3‐dB beamwidth more than 136° and the axial ratio (AR) beamwidth more than 132° in the xoz‐plane. Furthermore, an eight‐element phased array based on the wide‐beam CP antenna element is also developed. The measured results show that the main beam of the array can scan from ?65° to 65° with a gain fluctuation less than 3 dB and the ARs at every scanning angle less than 3 dB.     

Miniaturized low‐profile antenna based on uniplanar quasi‐composite right/left‐handed metamaterial

In this article, a metamaterial‐based broadband low‐profile antenna is presented. The proposed antenna employed an array of uniplanar quasi‐composite right/left‐hand (CRLH) metamaterial cells. This structure contributes to exciting the operating modes in lower frequencies. The antenna has an overall electrical size of 0.75 × 0.60 × 0.07 λ₀³ (λ₀ is the center operating wavelength in free space) and provides a 25% measured bandwidth with the center frequency of 5.1 GHz and maximum gain of 6.6 dB. The proposed antenna is an appropriate candidate for WLAN, WiMAX, and other wireless communication applications.     

Millimeter‐wave antenna with wide‐scan angle radiation characteristics for MIMO applications

A three‐element quasi Yagi‐Uda antenna array with printed metamaterial surface generated from the array of uniplanar capacitively loaded loop (CLL) unit‐cells printed on the substrate operating in the band 25‐30 GHz is proposed. The metamaterial surface is configured to provide a high‐refractive index to tilt the electromagnetic (EM) beam from the two dipole antennas placed opposite to each other. The metamaterial region focuses the rays from the dipole antenna and hence increases the gain of the individual antennas by about 5 dBi. The antenna elements are printed on a 10 mil substrate with a center to center separation of about 0.5 λ ₀ at 28 GHz. The three‐element antenna covers 25‐30 GHz band with measured return loss of 10 dB and isolation greater than 15 dB between all the three ports. The measured gain of about 11 dBi is achieved for all the antenna elements. The three antenna elements radiate in three different directions and cover a radiation scan angle of 64°.     

Ka‐band phased patch array antenna integrated with a PET‐controlled phase shifter

In this article, a 4 × 4 linear‐phased patch array antenna, consisting of four 1 × 4 patch subarrays and a true time‐delay multiline phase shifter, is proposed on a thin film liquid crystal polymer substrate at Ka‐band. The patch antenna is designed with a gain of 6 dBi at 35 GHz and a bandwidth of 23% centered at 35 GHz. To enhance the gain and symmetrize the beam patterns of the 4 × 4 array, a 1 × 4 patch subarray in the E‐plane was designed and characterized. The subarray produces an enhanced gain of 11 dBi and a wide beamwidth of ±38° in the H‐plane for beam steering. The proposed phase shifter comprises a 1 × 4 microstrip line power splitter and a piezoelectric transducer‐controlled phase perturber. A large phase variation of up to 370° and a low insertion loss of less than 2 dB were demonstrated for the phase shifter at Ka‐band. The integrated phased array attains a gain of 15.6 dBi, and a continuous true‐time delay beam steering of up to 33 ± 1° from 31 to 39 GHz. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:199–208, 2016.     

High gain substrate integrated waveguide beam scanning antenna with sub‐array elements

A method to enhance the gain of substrate integrated waveguide (SIW) beam scanning antenna is proposed in this article. 2 × 2 SIW cavity‐backed sub‐arrays are employed in array design. The antenna is constructed on two layers. The top layer places four SIW cavity‐backed sub‐arrays as radiating elements and the bottom layer is an SIW transmission line to feed the sub‐arrays. Beam scanning feature can be obtained due to the frequency dispersion. Moreover, through separating radiators to the other layer and using 2 × 2 SIW cavity‐backed sub‐arrays as radiating parts, the antenna gain is improved significantly. For a linear array, 4.1 to 6.8 dB gain enhancement is achieved compared to a conventional SIW beam scanning antenna with the same length. Then, the linear array is expanded to form a planar array for further gain improvement. A 64‐element planar beam scanning array is designed, fabricated, and tested. Experimental results show that the proposed planar array has a bandwidth from 18.5 GHz to 21. 5 GHz with beam scanning angle from ?5° to 11.5° and gain in the range of 20.5 to 21.8 dBi. The proposed high gain beam scanning antennas have potential applications in radar detection and imaging.     

High gain flexible liquid crystal polymer based 8‐element printed antenna for millimetric wave applications

In this article, an offset fed printed dipole antenna 2‐element, 4‐element, and 8‐element arrays are developed and analyzed for millimeter wave applications. The 8‐element array antenna is of compact size with dimensions 43.6 × 25.1 × 0.25 mm³. It achieved a broad impedance bandwidth (S₁₁ < ?10 dB) of 15.7 GHz from 24.7 to 40.4 GHz. The mutual coupling between array elements is less than ?35 dB in the operating band. The antenna achieved a gain of 12.62 to 13.1 dB. The 8‐element array antenna is fabricated on liquid crystal polymer material and tested. Impedance matching, far field radiation characteristics, co‐polarized and cross‐polarized patterns and group delay are analyzed in simulation and experimental measurement. The investigated results are in good agreement and hence, the developed array antenna is attractive for wideband millimeter wave applications.     

LTCC‐based monolithic system‐in‐package (SiP) module for millimeter‐wave applications

A miniature LTCC system‐in‐package (SiP) module has been presented for millimeter‐wave applications. A typical heterodyne 61 GHz transmitter (Tx) has been designed and fabricated in a type of the SiP module as small as 36 × 12 × 0.9 mm³. Five active chips including a mixer, driver amplifier, power amplifier, and two frequency multipliers were mounted on the single LTCC package substrate, in which all passive circuits such as a stripline (SL) BPF, 2 × 2 array patch antenna, surface‐mount technology (SMT) pads, and intermediate frequency (IF) feeding lines have been monolithically embedded by using vertical and planar transitions. The embedded SL BPF shows the center frequency of 60.8 GHz, BW of 4.1%, and insertion loss of 3.74 dB. The gain and 3‐dB beam width of the fabricated 2 × 2 array patch antenna are 7 dBi and 36 degrees, respectively. The assembled LTCC 61 GHz Tx SiP module achieves an output power of 10.2 dBm and an up‐conversion gain of 7.3 dB. Because of the integrated BPF, an isolation level between a local oscillation (LO) and RF signal is below 26.4 dBc and the spurious level is suppressed by lower than 22.4 dBc. By using a 61 GHz receiver (Rx) consisting of off‐the‐shelf modules, wireless communication test was demonstrated by comparing measured IF spectrums at the Tx and Rx part.     

A miniaturized multi‐wideband Quasi‐Yagi MIMO antenna system

A multi‐band directional multiple‐input–multiple‐output (MIMO) antenna system is presented based on a rectangular loop excited Quasi‐Yagi configuration. A 64% reduction in size is obtained using a rectangular meandered element as well as a small ground plane. The proposed two‐element MIMO antenna system covers the Telemetry L‐band and several LTE/WLAN bands. It has a wide measured bandwidth of 689 MHz (1.897–2.586 GHz) in the desired band centered at 2 GHz, and a measured bandwidth of more than 168 MHz across rest of the bands. The MIMO antenna system has a total size of 45 × 120 × 0.76 mm³, with a single element size of 55 × 60 × 0.76 mm³. The non‐desired back‐lobe radiation which is obtained using a small ground plane, is significantly reduced by using a novel defected ground structure (DGS) as compared with the complex techniques present in literature. The proposed DGS provides a high measured front‐to‐back ratio of 14 dB at 2 GHz and 11 dB in other bands. A maximum measured realized gain of 5.8 dBi is obtained in the desired band using a single parasitic director element. The proposed MIMO antenna system has a minimum measured radiation efficiency of 70%, isolation of 12 dB, and envelope correlation coefficient of 0.098 within all bands which ensures very good MIMO performance.     

Broadband planar dipole array Antenna with double C‐shaped slit elements for digital TV broadcasting transmission

This research has proposed a planar rectangular dipole antenna enclosed in double C‐shaped parasitically slit elements (i.e., radiator element) on a double‐cornered reflector for bandwidth enhancement. In the study, simulations were first carried out to determine the optimal parameters of the radiator element and then a radiator element prototype was fabricated and mounted onto a double‐cornered aluminum reflector. The simulated and measured |S₁₁|<–10 dB of the antenna element covered the frequency ranges of 451–901 MHz (66.6%) and 455–886 MHz (64.3%), respectively. The gain was enhanced by the subsequent deployment of multiple radiator elements to fabricate a four‐element vertically array antenna on an elongated double‐cornered reflector. The simulated and measured |S₁₁|20 and 相似文献   

Gain and isolation enhancement of patch antenna using L‐slotted mushroom electromagnetic bandgap

In this paper, the application of the L‐slotted mushroom electromagnetic bandgap (LMEBG) structure to patch antenna and antenna array is investigated. A coaxial fed patch antenna and antenna array are designed at 5.8 GHz, center frequency for ISM band (5.725‐5.875 GHz). Two layers of LMEBG are placed around the patch to achieve a gain enhancement of 1.9 dB. Measured results show a bandwidth enhancement of 300 MHz with an additional resonant frequency at 5.6 GHz with 4.5 dB of gain. A 5 × 2 array of LMEBG is used to achieve a 2 dB mutual coupling reduction and 2 dB gain enhancement for a two‐element H‐coupled patch antenna array.     

A stacked array antenna able to make a very large gain and tilt the end‐fire beam at the ISM‐band

In this article, an antenna is designed to generate an end‐fire radiated beam of a very large gain for a Printed Circuit Board (PCB) structure and steer the beam at an Industrial Scientific Medical (ISM)‐band. A flush‐mounted slot‐coupled feed and two parasitic layers can increase the antenna gain substantially. This single element is made to be a 1‐by‐8 array to generate a very high gain to deliver wireless power more than single element to the far‐field zone and spot the receiver of interest without interference toward others on the azimuth plane. Furthermore, four layers of this array are stacked to tilt the beam up and down on the elevation plane for target selectivity of a higher degree and more wireless‐power transfer. The antenna system is implemented with the substrate of Rogers 4350B and operated at 2.4 GHz as the ISM‐band service, and the validity of the proposed design is verified by electromagnetic numerical simulation and physical realization. The simulation and measurement of the fabricated 1D array antenna show nearly 19 and 16 dBi, respectively as high gains. The stacked structure as a 2D array generate the titled beam moving from ?35° to 35° with the antenna gain from 17 to 20 dBi for a varying angle.     

Circularly polarized 4 × 8 stacked patch antenna phased array with enhanced bandwidth for commercial drones

This paper demonstrates the design procedure of a 4 × 8 phased array antenna. Initially, a unit element in multilayer topology with orthogonal slots in the ground plane to couple electromagnetic energy is designed. Then, a stacked patch with truncated edges is placed on the top thick substrate layer to enhance the bandwidth to 600 MHz. This multilayered stacked patch unit element is then used to design a 1 × 4 and 4 × 8 slot coupled stacked patch array. On the bottom side, a novel feedline structure is designed to provide a 90 ^o phase difference at the antenna feed for the circular polarization. The phase difference is achieved in the feedline structure using a quarter wavelength ( λ_g/4 ) difference in the lengths. After the numerical validation, both 1 × 4 and 4 × 8 stacked patch antenna arrays are fabricated to validate the simulations. The final 4 × 8 array achieved the target specification of an active reflection of less than ?10 dB over 2.4 to 3.0 GHz, axial ratio of less than 3 dB, and stable radiation pattern over the complete band. In addition, beam scanning characteristics of the proposed stacked patch antenna arrays are also verified. The prototype resulted a peak gain of 19.5 dB at 2.7 GHz, 3‐dB beamwidth around 12 ^o in the xz‐plane, and scanning range of 90 ^o . Overall, good agreement between measured and simulated results showed that the proposed designed array capable of providing 600 MHz is an excellent candidate for the radar communication, small commercial drones, and synthetic aperture radar applications.     

A novel substrate integrated waveguide cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic

This article presented a substrate integrated waveguide (SIW) cavity‐backed self‐diplexing antenna array with frequency beam scanning characteristic. The proposed array consists of 16 SIW cavity‐backed slot antennas. The SIW cavity‐backed slot antenna can be fed by two separate ports to resonate at two different frequencies and achieve high isolation better than 20 dB between two input ports. The proposed element is a typical self‐diplexing antenna. These cavity‐backed slot antennas are shunt‐fed by a compact 1 to 16 SIW power divider and series‐fed by a set of microstrip lines, respectively. As a result, this array achieves an unidirectional radiation pattern at 10.2 GHz with high gain of 15.10 dBi, and a frequency beam scanning characteristic from 7.0 to 9.0 GHz ranging from ?50° to 46°.     

Bandwidth‐enhancement of circularly‐polarized fabry‐perot antenna using single‐layer partially reflective surface

In this article, we investigate bandwidth‐enhancement of a circularly‐polarized (CP) Fabry‐Perot antenna (FPA) using single‐layer partially reflective surface (PRS). The FPA is composed of a single‐feed truncated‐corner square patch antenna, which is covered by the PRS formed by a square aperture array. We revealed that the finite‐sized PRS produces extra resonances and CP radiations for the antenna system, which broadened the impedance matching and axial ratio (AR) bandwidths significantly. For verification, a broadband CP FPA prototype operating near 5.8 GHz was realized and tested. The fabricated antenna with overall size of 125 mm × 125 mm × 23.5 mm achieves a |S₁₁| < ?10 dB bandwidth of 31.7% (5.23‐7.2 GHz), an AR < 3‐dB bandwidth of 13.7% (5.45‐6.25 GHz), the peak gain of 13.3 dBic, a 3‐dB gain bandwidth of 22.38% (5.0‐6.26 GHz), and a radiation efficiency of >91%.     

Compact broadband circularly polarized slot‐patch antenna array

A simple design of circularly polarized slot‐patch antenna array with broadband operation and compact size is presented in this article. The antenna element consists of a circular slot and a semicircular patch, which are etched on both sides of a substrate. For the gain and axial ratio (AR) bandwidth enhancement, its array antennas are implemented in a 2 × 2 arrangement and fed by a sequential‐phase feeding network. The final 2 × 2 antenna array prototype with compact lateral dimension of 0.8λ_L × 0.8λ_L (λ_L is the lowest frequency within AR bandwidth) yielded a measured impedance bandwidth of 103.83% (2.76‐8.72 GHz) and a measured AR bandwidth of 94.62% (2.45‐6.85 GHz). The peak gain values within the AR bandwidth are from 2.85 to 8.71 dBi. A good agreement between the simulated and measured results is achieved. This antenna array is suitable for multiservice wireless systems covering WiMAX, WLAN and C‐band applications such as satellite communications.     

Millimeter‐wave planar high gain SIW antenna using half elliptic radiation slots

This article reports a high gain millimeter‐wave substrate integrated waveguide (SIW) antenna using low cost printed circuit board technology. The half elliptic slots which can provide small shunt admittance, low cross polarization level and low mutual coupling are etched on the board surface of SIW as radiation slots for large array application. Design procedure for analyzing the characteristics of proposed radiation slot, the beam‐forming structure and the array antenna are presented. As examples, an 8 × 8 and a 32 × 32 SIW slot array antennas are designed and verified by experiments. Good agreements between simulation and measured results are achieved, which shows the 8 × 8 SIW slot array antenna has a gain of 20.8 dBi at 42.5 GHz, the maximum sidelobe level of 42.5 GHz E‐plane and H‐plane radiation patterns are 22.3 dB and 22.1 dB, respectively. The 32 × 32 SIW slot array antenna has a maximum measured gain of 30.05 dBi at 42.5 GHz. At 42.3 GHz, the measured antenna has a gain of 29.6 dBi and a maximum sidelobe level of 19.89 dB and 15.0 dB for the E‐plane and H‐plane radiation patterns. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:709–718, 2015.     

Circularly polarized stacked patch antenna array with enhanced bandwidth for S‐band applications

In this article, a circularly polarized coupled slot 1 × 4 stacked patch antenna array with enhanced bandwidth is proposed for S‐band applications. Initially, a patch antenna radiating at 2.79 GHz is designed and maximum energy from feedline to patch element is coupled using two rectangular slots. Whereas, a parallel feedline structure is designed to provide polarization flexibility by creating 0, 90 , and 180^o phase differences. Then, a truncated patch element is vertically stacked in the design to achieve broader bandwidth of 600 MHz over frequency range from 2.4 to 3.0 GHz. Finally, a coupled slot 1 × 4 array stacked antenna array having feedline line structure to provide 90^o phase difference for circular polarization is designed and fabricated for measurements. It is observed that the final design achieved target specification having impedance matching (|S₁₁ | (dB) < ?10 dB over 2.4 to 3.0 GHz, broad band circular polarization, and 11.5 dBic total gain. Overall, a good agreement between simulated and measurement results is observed.     

Ten switched‐beams with 2 × 2 series‐fed 2.4 GHz array antenna and a simple beam‐switching network

This article presents a 2 × 2 series fed 2.4 GHz patch antenna array having multiple beam switching capabilities by using two simple 3 dB/90° couplers to achieve required amplitude and phase excitations for array elements with reduced complexity, cost and size. The beam switching performance with consistent gain and low side lobe levels (SLL) is achieved by exciting the array elements from orthogonally placed thin quarter‐wave (λ_g/4) feeds. The implemented array is capable to generate ten (10) switched‐beams in 2‐D space when series fed elements are excited from respective ports through 3 dB quadrature couplers. The dual polarized characteristics of presented array provide intrinsic interport isolation between perpendicularly placed ports through polarization diversity to achieve independent beam switching capabilities for intended directions. The implemented antenna array on 1.575 mm thick low loss (tan δ = 0.003) NH9450 substrate with ε_r = 4.5 ± 0.10 provides 10 dB return loss impedance bandwidth of more than 50 MHz. The measured beam switching loss is around 0.8 dB for beams switched at θ = ±20°, Ф = 0°, 90°, and 45° with average peak gain of 9.5 dBi and SLL ≤ ?10 dB in all cases. The novelty of this work is the capability of generating ten dual polarized switched‐beams by using only two 3 dB/90° couplers as beam controllers.