基于偏置继电反馈的一种新的频域辨识方法

提出一种新的基于偏置继电反馈的频域辨识算法，能够对包括迟延在内的SISO系统的传递函数参数进行在线辨识。首先利用偏置继电反馈辨识过程的频率响应，一次继电测试可以辨识过程Nyquist曲线上的多点。接着利用最小二乘法估计过程传递函数参数的初值，最后应用非线性共轭梯度法准确的辨识传递函数参数。该方法辨识精度高，同时可以有效避免大多继电反馈辨识方法测试时间过长及只能辨识固定的低阶模型的缺点。仿真结果验证了算法的有效性与准确性。     

非最小相位SIMO 系统的盲辨识方法

提出一种非最小相位SIMO系统的盲辨识方法.SIMO系统的多个输出可重新组合为具有循环平稳特性的输出序列,利用信号子空间与噪声子空间正交的特性,可求解系统的模型参数.该方法能辨识最小相位对象的结构参数,对非最小相位对象以及具有无限冲击响应的对象同样有效.该方法运算复杂度低,辨识速度快.仿真结果验证了其有效性.     

多输入多输出变量带误差模型的最坏情况频域辨识（英文）

本文将单输入单输出(SISO)变母带误差(EIV)模型的频域最坏情况辨识方法推广应用于多输入多输出(MIMO)情况.类似于SISO情况,多输入多输出变量带误差(MIMO EIV)模型的辨识模型集合由估计的系统名义模型及其最坏情况误差界描述.所估计的系统名义模型表征为正规右图符号,其最坏情况误差界具有可能的更少保守性,可利用EIV模型的先验信息和后验信息由v-gap度量量化得到.因此,这种模型集合非常适合于后期利用Vinnicombe提出的H。。回路成形法设计鲁棒控制器.最后,利用一数值仿真实例验证所提出辨识方法的有效性.     

多输入多输出变量带误差模型的最坏情况频域辨识

本文将单输入单输出(SISO)变量带误差(EIV)模型的频域最坏情况辨识方法推广应用于多输入多输出 (MIMO)情况. 类似于SISO情况, 多输入多输出变量带误差(MIMO EIV)模型的辨识模型集合由估计的系统名义模型及 其最坏情况误差界描述. 所估计的系统名义模型表征为正规右图符号, 其最坏情况误差界具有可能的更少保守性, 可利 用EIV 模型的先验信息和后验信息由v-gap度量量化得到. 因此, 这种模型集合非常适合于后期利用Vinnicombe提出 的H1回路成形法设计鲁棒控制器. 最后, 利用一数值仿真实例验证所提出辨识方法的有效性.     

UD分解与偏差补偿结合用于变量带误差模型辨识

本文提出一种基于UD(upper-diagonal)分解与偏差补偿结合的辨识方法,用于变量带误差(errors-in-variables,EIV)模型辨识.考虑单输入单输出(single input and single output,SISO)线性动态系统,当输入和输出含有零均值、方差未知的高斯测量白噪声时,该类系统的模型参数估计是一种典型的EIV模型辨识问题.为了获得这种EIV模型参数的无偏估计,本文先推导出最小二乘模型参数估计偏差量与输入输出噪声方差以及最小二乘损失函数与输入输出噪声方差的关系,然后采用UD分解方法递推获得模型参数估计值,再利用输入输出噪声方差估计值补偿模型参数估计偏差,以此获得模型参数的无偏估计.本文还讨论了算法实现过程中遇到的一些问题及修补方法,并通过仿真例验证了所提辨识方法的有效性.     

线性SISO系统辨识的线性规划法

对于线性SISO系统,文献[1]给出了参数估计的线性规划方法。在此基础上,本文论证了用线性规划法辨识系统,可用较少的试探次数确定系统模型的阶和参数。     

基于信息压缩矩阵交替变换的分数阶系统结构、阶次与参数的同时辨识方法

在愈来愈被关注的分数阶控制研究中,分数阶系统辨识的理论与方法是一个重要方向. 目前相关研究极少涉及分数阶系统的结构和阶次辨识. 首先讨论了分数阶线性SISO系统辨识的有色噪声模型,然后构造了具有"移位性质"的信息向量和信息压缩矩阵,并给出了信息压缩矩阵分解变换的理论分析及其证明;在此基础上,提出了一种利用信息压缩矩阵交替变换提取相关信息的算法,论述了最优估计模型结构与阶次的判定准则,从而同时辨识分数阶系统时域模型的结构、阶次与参数;仿真研究表明,本文方法能够获得满意的辨识结果,具有良好的抑制噪声干扰能力;不仅能够准确地辨识系统模型的结构与阶次,而且能够辨识噪声模型的结构与阶次.     

无模型SISO时滞系统的PID参数稳定域研究

针对无精确模型的单输入单输出(SISO)时滞系统, 利用频率响应数据, 给出确定PID参数稳定域的解析方法. 首先通过继电反馈频域辨识法得到系统的频率响应数据, 然后基于该数据确定控制参数的奇异边界线和非奇异边界线, 并判断边界线的哪一侧具有更少的不稳定极点, 从而给出能使闭环系统稳定的控制参数区域. 该方法避免了模型辨识的复杂计算过程, 为无模型SISO时滞系统的PID控制器设计和调节提供了一条简单有效的途径. 仿真结果验证了方法的有效性.     

多变量系统状态空间模型的递阶辨识

研究多变量系统状态空间模型的递阶辨识问题,推广了作者提出的标量系统状态和参数联合辨识算法.当状态可量测时,利用最小二乘原理直接辨识状态空间模型的参数矩阵;当状态不可测时,利用递阶辨识原理提出了状态空间模型递阶辨识方法,使用系统输入输出数据来估计系统的未知状态和参数.状态空间模型递阶辨识方法分为两步:首先假设系统状态是已知的(即参数估计算法中的未知系统状态用其估计代替),基于状态估计和系统输入输出数据递归计算系统参数估计;然后基于系统输入输出数据和获得的参数估计,递归计算系统的状态估计.     

模型在线辨识方法及其应用

本文提出了一种有效的非线性模型和参数在线估计方法。为了实现模型在线辨识，本文根据误差性能指标，给出了模型判据及计算式。根据递推加权最小二乘算法和优选判据，导出了模型和参数同时在线估计的有效算法。为了提高计算效率和数值稳定性，模型辨识和参数辨识均采用了Ｕ－Ｄ分解方法。新方法可用于飞行器非线性气动模型和参数的实时估计。实际应用结果表明，使用该方法可以有效地确定多项式、样条函数模型结构，参数辨识的结果满     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Call for Papers The 6^th International Conference on Grid and Cooperative Computing

Recent years have seen rapid advances in various grid-related technologies, middleware, and applications. The GCC conference has become one of the largest scientific events worldwide in grid and cooperative computing. The 6th international conference on grid and cooperative computing (GCC2007) Sponsored by China Computer Federation (CCF),Institute of Computing Technology, Chinese Academy of Sciences (ICT) and Xinjiang University ,and in Cooperation with IEEE Computer Soceity ,is to be held from August 16 to 18, 2007 in Urumchi, Xinjiang, China.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.     

The Distributed Time-Triggered Simulation Scheme: Core Principles and Supporting Execution Engine

Distributed real-time simulation is a young technology field but its practice is under increasing demands. In recent years the author and his collaborators have been establishing a new approach called the distributed time-triggered simulation (DTS) scheme which is conceptually simple and easy to use but widely applicable. The concept was initiated in the course of developing a new-generation object-oriented real-time programming scheme called the time-triggered message-triggered object (TMO) programming scheme. Some fundamental issues inherent in distributed real-time simulation that were learned during recent experimental studies are discussed along with some approaches for resolving the issues. An execution engine developed to support both the TMOs engaged in control computation and the TMOs engaged in DTS is also discussed along with its possible extensions that will enable significantly larger-scale DTSs.     

Software-Konfigurationsmanagement in großen Softwareprojekten

Zusammenfassung Mit zunehmender Größe der Softwaresysteme verschärfen sich die für die Software-Herstellung typischen Probleme: Beherrschen großer Objektmengen, Erhalten der Systemkonsistenz, Kontrolle der ständigen Änderungseinflüsse und Gewährleisten einer langen Lebensdauer. Die Disziplin Konfigurationsmanagement bildet den methodischen Ansatz, diese Probleme besser zu beherrschen. Software-Konfigurationsmanagement faßt die Herstellung von Softwaresystemen als eine Abfolge von kontrollierten Änderungen an gesicherten Zwischen- und Endergebnissen auf. Dargestellt werden die Objekte und Funktionen des Software-Konfigurationsmanagements sowie die hierfür in großen Software-Projekten benötigten Methoden, Instanzen und Hilfsmittel.     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and     

Editorial:Brain-machine interface(BMI) and cyborg intelligence

正Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,and represent an area of research where significant progress has been made during the past decade.Based on BMIs,mind information can be read out by neural signals to control     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate     

SCIENCE CHINA Information Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~