共查询到20条相似文献,搜索用时 46 毫秒
1.
采用催化剂辅助化学气相沉积法,通过固-液-气(V-L-S)机理控制在硅衬底上制备了高质量的InN纳米线。利用FESEM、XRD、HRTEM对制备的InN纳米线的表面形貌和结构进行了表征。分析表明合成的InN纳米线为标准的六方纤锌矿结构,纳米线沿[102]方向生长。室温PL光谱表明,制备的InN纳米线在1580rlIn(... 相似文献
2.
3.
4.
5.
6.
7.
具有四角状棒-线结构纳米氧化锌的制备和性能 总被引:3,自引:0,他引:3
用气相氧化法合成出具有纳米棒-线结构的ZnO纳米材料.扫描电子显微镜(SEM)、透射电子显微镜(TEM)观察和X射线衍射谱(XRD)的分析表明:四角状ZnO纳米材料具有六方纤锌矿晶体结构,在棒-线纳米结构中,每个角的长度为1~2 μm,纳米棒的直径为100~200 nm,纳米线的直径约为30 nm.用气-固(VS)生长机制解释了棒-线纳米结构的形成.与ZnO大块材料不同,四角状ZnO纳米棒-纳米线材料在室温下具有~380 nm波长的紫外发射和~520 nm波长的绿光发射,其机理是晶体中杂质与结构缺陷少,以及与其纳米尺度相联系的量子限域效应. 相似文献
8.
采用无金属催化剂的简单热蒸发法,在Si(100)衬底上不同生长温度下成功地制备了高密度和大长径比的单晶ZnO纳米线。分别利用X射线衍射仪(XRD)、扫描电子显微镜(SEM-EDS)、透射电子显微镜(TEM)及荧光光谱仪表征样品的结构和发光性质。XRD和TEM研究表明,所制备的样品为沿C轴择优取向生长的单晶ZnO纳米线,具有六方纤锌矿结构。SEM和TEM研究表明,生长温度对ZnO纳米线的形貌及长径比的影响较大。当生长温度为700℃时,制备得到长径比为300(长度约为15μm,直径约为50nm)的ZnO纳米线。低于600℃时,形成花状ZnO纳米锥或 纳 米 棒。高 于700℃时,形 成 小 长 径 比 的ZnO纳米棒。此外,室温光致发光(PL)谱上出现一个强而尖锐的紫外发射峰以及一个弱而宽泛的蓝光发射峰。采用的热蒸发法制备ZnO纳米线基于气-固(VS)生长机理且该生长方法可用于大规模、低成本制备高纯度的单晶ZnO纳米材料。 相似文献
9.
采用射频磁控溅射技术先在硅衬底上制备Ga2O3/ Nb薄膜,然后在900℃时于流动的氨气中进行氨化制备GaN纳米线.用X射线衍射(XRD)、傅立叶红外吸收光谱(FTIR)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)详细分析了GaN纳米线的结构和形貌.结果表明:采用此方法得到的GaN纳米线为六方纤锌矿结构,其纳米线的直径大约在50~100nm之间,纳米线的长约几个微米.室温下以325nm波长的光激发样品表面,只显示出一个位于364.4nm的很强的紫外发光峰.最后,简单讨论了GaN纳米线的生长机制. 相似文献
10.
采用无金属催化剂的简单热蒸发法,在Si(100)衬底上不同生长温度下成功地制备了高密度和大长径比的单晶ZnO纳米线。分别利用X射线衍射仪(XRD)、扫描电子显微镜(SEM-EDS)、透射电子显微镜(TEM)及荧光光谱仪表征样品的结构和发光性质。XRD和TEM研究表明,所制备的样品为沿c轴择优取向生长的单晶ZnO纳米线,具有六方纤锌矿结构。SEM和TEM研究表明,生长温度对ZnO纳米线的形貌及长径比的影响较大。当生长温度为700℃时,制备得到长径比为300(长度约为15μm,直径约为50nm)的ZnO纳米线;低于600℃时,形成花状ZnO纳米锥或纳米棒;高于700℃时,形成小长径比的ZnO纳米棒。此外,室温光致发光(PL)谱上出现一个强而尖锐的紫外发射峰以及一个弱而宽泛的蓝光发射峰。采用的热蒸发法制备ZnO纳米线基于气-固(VS)生长机理且该生长方法可用于大规模、低成本制备高纯度的单晶ZnO纳米材料。 相似文献
11.
A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils. 相似文献
12.
The end of over unit products of more than Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits beer wine yellow wine fruit syrup wine others cover over % of the national top-branded liquor products.…… 《中国标准化(英文版)》2008,25(1):30
The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.…… 相似文献
13.
Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster. 相似文献
14.
N.A. Odintsova N.V. Ageenko K.V. Kiselev N.M. Sanina E.Y. Kostetsky 《International Journal of Refrigeration》2006,29(3):387
We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes. 相似文献
15.
David R. Smith F. R. Fickett 《Journal of research of the National Institute of Standards and Technology》1995,100(2):119-171
Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability. 相似文献
16.
Fco. Javier Franco Pérez Marc Gener Moret 《Materials and Manufacturing Processes》2017,32(7-8):876-884
ABSTRACTThe production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials. 相似文献
17.
As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion. 相似文献
18.
Arc spraying coatings are widely used in various applications, but uncommon in cast iron substrate. Different surface pretreatment technology is tested on substrates of gray cast iron. Surface roughness and residual stress were measured by TR200 and X-ray diffraction analyzer. Influence of different surface pretreatment methods ( dry blasting and fusebond) on roughness and residual stress was analyzed. The arc-sprayed coatings of wire 3Cr13 (φ2mm) on gray cast iron substrate is studied. The microstructure and interface of bonding layer were observed by SEM. The bond strength was taken by tensile test. Results show that bond strength with grit blasting is higher than fuse-bond; it is feasible to make wire 3Cr13 coating with arc spraying on cast iron substrate roughened by grit blasting. 相似文献
19.
TiO2 ceramic coatings with thickness of 20 μm were formed on the surface of pure titanium by micro-plasma oxidation. Their micro-structures were investigated by by using X-ray diffraction and their surface images were detected by using scan electronic microscope. There were three kinds of TiO2 coatings, pure anatase type TiO2 phase, mixed phases consisted of rutile type TiO2 phase and anatase type TiO2 phase, pure rutile type TiO2 phase. The coating surface with the pure anatase type TiO2 phase is rough, while the coating surface with the pure rutile type TiO2phase is smooth. The upper coating surface with the mixed type TiO2 phases is anatase type TiO2 structure and the subsurface of the TiO2 coating is rutile type TiO2structure. 相似文献
20.
R. Owsiński S. Kamiński M. Szymaniec A. Niesłony T. Łagoda 《Materialwissenschaft und Werkstofftechnik》2015,46(10):1059-1067
The insightful discussion of the relationship between the construction of metallographic and fatigue life and proposition of mathematical relationships describing this relationship was conducted in the paper. This paper presents a method for estimating the fatigue life, based on the construction of the microstructural material taking into account the grain size and the participation of ferrite and pearlite phase. 相似文献