山东工艺美术学院视觉传达设计学院简介

正视觉传达设计学院拥有山东省实力最为雄厚的艺术设计重点学科。专业设置方面设有以品牌传播设计、广告传播设计、包装传播设计、出版传播设计为主的艺术设计和包装工程两个专业五个方向。     

现代包装设计与构建艺术化生活方式研究

现代包装设计作为一门商业性的艺术设计,在传播艺术设计审美信息的同时,又使其所包装的产品与社会生活审美达到理想的境界.它以其独特的艺术魅力影响着人们的情感和观念,使包装设计与当代生活方式的交融关系的科学理论和价值得以体现.并对信息时代包装设计的文化、消费与时尚、艺术、设计与生活等几方面作了较为详尽的论述,阐述了艺术设计的最高境界是为人构建艺术化的生活方式的鲜明观点.     

基于艺术设计的审美营销模式研究

运用艺术设计和定性分析的方法,指出了"营销美学"称谓的局限性,提出了"审美营销"的概念和定义,认为把利用美学为营销创造审美吸引力的经营策略称"审美营销"比称"营销美学"要更为科学合理。基于艺术设计对产品、服务以及营销传播和营销环境的审美创造,揭示了美在营销中的源流,整合了审美营销系统,构建了艺术设计对营销影响的模型和企业审美营销的模型,得出了艺术设计创美促销的结论。     

湖南工业大学包装设计艺术学院简介

正湖南工业大学包装设计艺术学院是以设计学学科群和包装专业特色为优势的教学中心、设计中心和研究中心,是我国目前唯一的一所以"包装"命名的艺术设计学院。学院现有艺术设计、动画和艺术设计学3个本科专业。其中,艺术设计专业设包装艺术设计、广告艺术设计、环境艺术设计、服装艺术设计以及形象设计与服饰表演5个     

艺术设计中“文”与“质”的辨证关系

分析了古代文艺思想中"文"与"质"到艺术设计领域"文"与"质"的理论研究变化过程,通过艺术设计中的紫砂茶具设计为切入点,结合紫砂茶具设计的历史、造型、功能及如何鉴赏,论述了在紫砂设计领域"文"与"质"的辨证关系,进而引申到艺术设计领域。通过实际的紫砂茶具设计案例补充说明了艺术设计中"文"与"质"的辨证关系。     

现代艺术设计中的民艺符号

现代艺术设计已经发展成为"人性化"的设计,除表达其目的性以外,还要透过一些符号元素来传达设计的文化内涵.民艺符号是历史发展的见证,展示了物质生产和美学艺术前进的脉络,体现了我国传统文化的精髓.本研究从符号的角度来探讨现代设计如何与中国民族传统符号相结合,寻求能够代表中国并走向世界的艺术设计之路.     

浅谈包装印刷工艺在艺术设计中的重要性

艺术设计最终目的是为人类服务，为社会服务。随着科技的进步，社会的发展，艺术设计同样也推动商品经济向前发展。那么又是谁把设计的艺术魅力，新的设计理念，及时地传播给人类，那就是印刷。是印刷发展了设计，同时，艺术设计又推动了印刷技术的发展。     

对"人本主义"设计理念的再认识

艺术设计中的"人本主义",也就是我们从事艺术设计的工作者平常所说的:设计要遵循"以人为本"的思想理念.这一设计理念来源于前一世纪,由当时德国著名的建筑设计师格罗佩斯创立的包豪斯学校所提倡.     

设计的语言共享的网络

艺术设计语言,应是与接受者互动构成的网络,而网络用的核心是"共享".视觉表达的准确性和设计语言的认知度,是设计成功的关键所在,它决定着艺术设计的存在意义.     

谈艺术设计项目的设计品格分类

从艺术设计项目的设计品格分类的角度提出艺术设计的新思路.设计品格是由顾客需求层次决定的,其不仅代表着不同层次的艺术设计项目的品质等级,同时也代表了项目的价值构成内容比例变化.艺术设计项目的设计品格分类,采用中国古典绘画艺术品格分类名词的方法,使不同级别的艺术品格表达更鲜明,更准确,和易记忆.设计品格的清晰分类,有利于艺术设计企业管理和艺术设计人员的培养.     

Estimation of Parameters of Universal Distribution of Moments of Failure of Products

A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling.     

Evaluation of optical properties of highly scattering media by moments of distributions of times of flight of photons

A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue.     

Assessment of intakes of mixtures of radionuclides

Australia has several uranium mines and a large number of mineral sand mines, with associated processing facilities. Exposures resulting from these mining and processing operations usually involve intakes of mixtures of radionuclides. This work describes the development of a suite of first order, linear compartment models, based on the ICRP Publication 66 respiratory tract model, and an analytical solution to the decay equations, for assessing the consequences of such intakes. The computer programs based on these models directly compute excretion, organ retention and organ and whole-body doses for intakes of either single radionuclides or any mixture of radionuclides belonging to the same radioactive decay chain. The intake can be via inhalation, ingestion or injection, and can be acute, chronic or of limited duration. The starting concentration and degree of secular (dis)equilibrium can be specified for each radionuclide. No assumptions need to be made about the relative magnitudes of the radioactive half-lives of the different nuclides.     

Estimation of potentialities of methods of summation of direct measurement errors

Conventional methods for summation of direct measurement errors are considered. Conditions under which these methods provide consistent results are stated. It is proposed to utilize for characteristic of the total error, its interval estimator or the half-sum of the value obtained by adding up its arithmetic and geometric random errors.Translated from Izmeritel'naya Tekhnika, No. 4, pp. 10–12, April, 1995.     

空压机轴承箱蜗壳温度探头油封改造

由于空压机进气侧轴承箱蜗壳温度探头密封效果不好,使空压机及其后续管道受到油污染。后将温度探头的O形圈密封改为骨架油封,杜绝了轴承箱漏油问题。文章简介空压机的结构和技术参数,详细介绍了骨架油封的制作和优点。     

Determination of parameters of microstructural inhomogeneity of deformation of metals by the method of modeling

The article suggests a method of evaluating the microstructural inhomogeneity of deformation of metals by modeling. The method includes the measurement of deformations of metal according to meshes of a dividing grid with small base and the calculation of the distribution parameters of microdeformations in model representation. It is shown that the modeling method makes it possible objectively to evaluate the microinhomogeneity of deformation of metals independently of the chosen mesh size of the dividing grid. New structural characteristics are introduced: the base and wave of variation expressing the degree of crumbling or amalgamation of metal grains by inhomogeneity of deformation.Translated from Problemy Prochnosti, No. 7, pp. 40–44, July, 1991.     

Characteristics of mechanical properties of materials in studies of conditions of attainment of marginal states

It is shown that conditions of attainment of marginal states in the material of structural components are formulated on the basis of analysis of force and deformation criteria of formation and development of destruction. The parameters of these criteria are data on types of structural materials, standard and special characteristics of their mechanical properties, structural forms of considered elements of the equipment, and their operating stress loading. In this case, the construction of a system of state equations for describing interrelation of current damage, external actions, and responses to them is based on the concept of calculating variations in properties of materials at all stages of the design life cycle.     

Numerical study of methods of linearization of the output characteristics of radio-frequency sensors of the level of dielectric media

Different constructions of the sensing elements of radio-frequency level sensors based on sections of long lines are numerically investigated by means of the Matlab program for the purpose of minimizing the measurement error caused by the nonlinearity of the output characteristic. It is shown that the nonlinearity is lowest for U-shaped designs. The nonlinearity factor KN may be regulated by varying the capacitance of a correcting capacitor connected to the input of the sensing element and (or) the length of one of the sections of the long line. In selecting an optimal capacitance of the correcting capacitor KN ≤ 0.15% for control media with dielectric permittivity in the range 2.2–30.