不同铺层方式下连续玻璃纤维/聚丙烯复合材料波纹夹芯板的力学性能

制备了多种铺层方式的连续玻璃纤维/聚丙烯（GF/PP）复合材料波纹夹芯板,并研究了GF/PP复合材料波纹夹芯板的平压性能和弯曲性能。结果显示:面板相同时,增加芯板厚度可大大增加夹芯板整体的平压性能;芯板相同时,面板的铺层方式对夹芯板的平压性能有一定影响,且面板含有0°和90°铺层的波纹夹芯板具有最高的平压模量,为59.55 MPa,而单纯增加面板厚度对提升波纹夹芯板的平压性能影响不大;面板铺层方式对弯曲性能具有较大影响,面板为0°铺层的波纹夹芯板具有最高的横向弯曲模量,为783.66 MPa,面板为90°铺层的波纹夹芯板具有最高的纵向弯曲模量,为732.09 MPa;面板为单向铺层（0°或90°铺层）时,会使夹芯板另一方向（纵向或横向）的弯曲性能形成短板。      

Structural behaviour of composite sandwich panels with plain and fibre-reinforced foamed concrete cores and corrugated steel faces

This paper studies the four-point bending response and failure mechanisms of sandwich panels with corrugated steel faces and either plain or fibre-reinforced foamed concrete core. Mechanical properties of both plain and polyvinyl alcohol fibre-reinforced foamed concrete were obtained, which are needed for the design of sandwich panel and numerical modelling. It is found that the fibre-reinforcement largely enhances the mechanical behaviour of foamed concrete and composite sandwich panels. Finite element code Abaqus/Standard was employed to investigate the influence of face/core bonding and fastening on the four-point bending response of the sandwich panels. It was found that face/core bonding plays a crucial role in the structural performance while the influence of fastening is negligible.     

一种新型自粘接预浸料-Nomex蜂窝板面-芯结合强度关键影响因素试验研究

以Nomex蜂窝和新型自粘接预浸料作为试验材料, 通过采用均压板的共固化工艺制备蜂窝夹层板。采用滚筒剥离方法测试其面-芯结合性能, 采用电子显微镜等方法观察其蒙皮-蜂窝粘接面、剥离后蒙皮表面结构及蜂窝壁端面的微观形态, 并测试了蜂窝壁厚度与蜂窝壁浸渍的树脂成分。结合以上测试结果研究了在采用均压板的制备过程中工艺参数和蜂窝特征对蜂窝夹层板面-芯结合强度的影响规律, 并考察了蜂窝夹层板的粘接形式。结果表明: 在采用均压板模具的共固化工艺中, 一定的升温速率范围内, 蜂窝板的面-芯结合强度随着升温速率的减小而增大; 而加压时机对蜂窝板的面-芯结合强度的大小没有明显的影响; 蜂窝壁端面越粗糙、蜂窝壁树脂层厚度越小, 夹层板的面-芯结合强度越好。     

Development of a satellite structure with the sandwich T-joint

In this study, a monocoque satellite structure composed of many composite sandwich panels, which consist of two carbon fiber/epoxy composite faces and an aluminum honeycomb core, was designed to reduce structural mass and to improve static and dynamic structural rigidity. To join composite sandwich panels with T-shape joints, a new I-shape side insert, which was fixed inside the composite sandwich panel edge with film adhesive, was suggested. The composite sandwich panels were assembled with bolts using the through-the-thickness insert and the I-shape side insert. The flatwise tensile and compressive tests of the composite sandwich panels were performed with respect to the bonding pressure between the composite face and the aluminum honeycomb core to achieve an optimal bonding pressure. To investigate the joint characteristics of the composite faces and the I-shape side insert, cleavage peel tests were performed with respect to the bonding thickness. Also, a finite element model of the composite sandwich T-joint with the I-shape side insert was developed from experimental results of the impulse response tests and composite sandwich T-joint static tests. From the finite element analysis, the structural reliability of the monocoque composite sandwich satellite structure was verified.     

Process Factors and Edgewise Compressive Properties of Scarf-repaired Honeycomb Sandwich Structures

Bonded repairs were conducted on flat and edge-closed composite sandwich panels that had undergone different levels of initial damage, and edgewise compression behaviors of repaired panel were tested. Experimental results indicate that these repair techniques can restore the compression performance of damaged panels effectively. The repaired specimens recovered an average of over 83 % of their strength. A k-sample Anderson-Darling test was used to analyze the influence of various parameters, including curing temperature, curing pressure, and repair configurations. After a thorough comparison, it was concluded that a high-temperature, high-pressure treatment can improve the mechanical performance of repaired panels, but the improvement is closely related to the structural complexity of the repaired region. A double-side repair scheme could be used to prevent the degradation of mechanical performance caused by the additional bending moment. The conclusions drawn in the present study provide further insight into the mechanical performance of repaired sandwich panels under edgewise compressive loads. These data facilitate the improved design methodology on bonded repair of composite sandwich structures.     

等腰梯形蜂窝芯玻璃钢夹芯板的面内压缩性能

为研究等腰梯形蜂窝芯玻璃钢夹芯板面内压缩破坏机制, 利用材料试验机对夹芯板面内压缩性能进行了试验测试, 并开展了模拟研究。结果表明: 夹芯板的面内压缩破坏方式主要有面板折断、夹芯板屈曲失稳和夹芯板中面板与蜂窝芯脱粘3种类型。面板为夹芯板面内压缩的主要承载构件, 蜂窝芯对面板起到固支作用。面板结构参数与材料参数为影响夹芯板面内压缩抗压强度与抗压刚度主要因素, 多数蜂窝芯的结构参数与材料参数对夹芯板面内压缩抗压强度的影响微弱, 而个别蜂窝芯的结构参数对夹芯板面内压缩抗压刚度的影响比较显著。夹芯板体积一定时, 随着蜂窝芯胞体单元数量的增加, 夹芯板面内压缩的抗压强度与抗压刚度逐渐增大。      

新型轻木GFRP夹芯板拉挤成型工艺及其界面性能

选用无碱玻璃纤维束、短切纤维毡、不饱和树脂与泡桐木芯材,制备了轻木-玻璃纤维增强塑料(GFRP)夹芯板,对其拉挤工艺进行了研究.研究表明:设定模具加热温度(凝胶区)为160 ℃、选取的拉挤速率为10 cm/min时,可制造得到表观性能良好的泡桐木-GFRP夹芯板.通过双悬臂梁(DCB)试验,在芯材表面开槽和不开槽2种情况下,研究了泡桐木与GFRP面层之间的界面黏结性能,并与真空导入工艺制作的夹芯板的界面黏结性能进行了对比.结果表明:拉挤工艺生产的泡桐木-GFRP夹芯板的界面黏结性能已达到甚至优于真空导入工艺生产的.芯材表面开槽可以有效提高试件的界面能量释放率,且对真空导入工艺制作的试件效果更为明显.在拉挤工艺中,树脂难以有效填充齿槽形成"树脂钉",故不能明显提高界面黏结力.在对界面性能要求不严格时,拉挤工艺中芯材表面可不开槽,以减少生产工序、降低生产难度.     

Wet-sand impulse loading of metallic plates and corrugated core sandwich panels

We have utilized a combination of experimental and modeling methods to investigate the mechanical response of edge-clamped sandwich panels subject to the impact of explosively driven wet sand. A porthole extrusion process followed by friction stir welding was utilized to fabricate 6061-T6 aluminum sandwich panels with corrugated cores. The panels were edge clamped and subjected to localized high intensity dynamic loading by the detonation of spherical explosive charges encased by a concentric shell of wet sand placed at different standoff distances. Monolithic plates of the same alloy and mass per unit area were also tested in an identical manner and found to suffer 15-20% larger permanent deflections. A decoupled wet sand loading model was developed and incorporated into a parallel finite-element simulation capability. The loading model was calibrated to one of the experiments. The model predictions for the remaining tests were found to be in close agreement with experimental observations for both sandwich panels and monolithic plates. The simulation tool was then utilized to explore sandwich panel designs with improved performance. It was found that the performance of the sandwich panel to wet sand blast loading can be varied by redistributing the mass among the core webs and the face sheets. Sandwich panel designs that suffer 30% smaller deflections than equivalent solid plates have been identified.     

Development and Mechanical Behavior of FML/Aluminium Foam Sandwiches

In this study, the Fiber-Metal Laminates (FMLs) containing glass fiber reinforced polypropylene (GFPP) and aluminum (Al) sheet were consolidated with Al foam cores for preparing the sandwich panels. The aim of this article is the comparison of the flexural properties of FML/Al foam sandwich panels bonded with various surface modification approaches (silane treatment and combination of silane treatment with polypropylene (PP) based film addition). The FML/foam sandwich systems were fabricated by laminating the components in a mould at 200 °C under 1.5 MPa pressure. The energy absorbtion capacities and flexural mechanical properties of the prepared sandwich systems were evaluated by mechanical tests. Experiments were performed on samples of varying foam thicknesses (8, 20 and 30 mm). The bonding among the sandwich components were achieved by various surface modification techniques. The Al sheet/Al foam sandwiches were also consolidated by bonding the components with an epoxy adhesive to reveal the effect of GFPP on the flexural performance of the sandwich structures.     

碳纤维铝蜂窝夹芯复合结构隔声性能研究

铝蜂窝夹芯复合结构在航空工业、高速列车及汽车车体中得到越来越多的应用,其隔声性能对车内及机舱噪声有重要影响。建立了碳纤维铝蜂窝夹芯复合结构有限单元模型,用有限单元法计算了结构在声载荷激励下的响应,并计算分析了复合结构的隔声性能,分析了碳纤维复合面板厚度、面板层数、铺设角度、铝蜂窝芯层的厚度、铝蜂窝壁厚对隔声性能的影响。研究结果表明,面板采用碳纤维复合结构时,在小于1 000 Hz的低频段,相同面板厚度的铝蜂窝复合结构隔声性能比全铝合金材料的铝蜂窝夹芯复合结构有所降低,而且在高频段会出现隔声量更低的隔声低谷;相较于铝合金面板,复合结构的面板采用碳纤维复合材料时,能够实现整体结构轻量化也提高复合结构的隔声性能;各层之间按相对90°铺设时复合结构隔声性能最好;随着面板厚度的增加复合结构隔声性能增加,面板层总厚度不变的情况下,单层面板或者过多的层数都会使复合结构隔声性能降低。     

Enhancing the resistance of composite sandwich panels to localized forces for civil infrastructure and transportation applications

This paper presents the details of an experimental and numerical study that was conducted to evaluate different methods of increasing the punching resistance of glass fiber reinforced polymer (GFRP) composite sandwich panels with balsa wood cores. A total of four large-scale panels were subjected to concentrated loads in a two-way bending configuration. Different techniques of locally stiffening the panels were investigated including bonding a steel coupling plate to the loaded surface of the panels and embedding steel tubes within the panel core. The experimental program was supplemented by a finite element study to evaluate the location, magnitude, and extent of stress concentrations in the panels. The experimental program demonstrated that the failure modes of the stiffened panels shifted from local punching to delamination of the loaded GFRP skin which initiated at the discontinuities of the panel stiffness. The finite element analysis indicated that the delamination failure was due to stress concentrations which formed at these critical locations. The local stiffening of the panel approximately tripled the concentrated load carrying capacity of the panels. The research findings suggest that, through careful design and detailing, composite sandwich panels can be used to resist large-magnitude concentrated loads such as those found in civil infrastructure and heavy freight transportation applications.     

钢板夹泡沫铝组合板抗爆性能数值模拟

鉴于泡沫铝材料良好的吸能特性和三明治型组合构件在强度、刚度上的优势,通过有限元分析软件ANSYS/LS-DYNA对钢板-泡沫铝-钢板三明治型组合板进行了装药量为10.0kgTNT的非接触爆炸数值模拟,考察组合板在爆炸荷载作用下的动力响应。研究表明:钢板夹泡沫铝组合板承受爆炸冲击波荷载时,响应方式主要为组合板整体弯曲变形和泡沫铝芯层局部压缩变形,芯层压缩变形是组合板吸收耗散能量的主要途径;适当地增加泡沫铝芯层厚度和面板厚度能够提高组合板的抗爆性能,同时使组合板充分发挥耗能作用。     

明胶鸟弹撞击复合材料蜂窝夹芯板试验

开展明胶鸟弹撞击复合材料蜂窝夹芯板试验,研究夹芯结构在软体高速冲击下的损伤形式,分析相关因素对结构动态响应结果的影响。通过CT扫描对复合材料蜂窝夹芯板内部进行检测可知,面板出现分层、基体开裂、纤维断裂、凹陷、向胞内屈曲等损伤形式,蜂窝芯出现芯材压溃、与面板脱粘的损伤形式;分析复合材料蜂窝夹芯板后面板的动态变形过程及撞击中心处位移-时间数据可知,复合材料蜂窝夹芯板在撞击过程中出现由全局弯曲变形主导和局部变形主导的两种变形模式;通过对比不同工况下的复合材料蜂窝夹芯板损伤程度可知,复合材料蜂窝夹芯板损伤程度随鸟弹撞击速度的增加而增大;蜂窝芯高度为10 mm的复合材料蜂窝夹芯板较蜂窝芯高度为5 mm的复合材料蜂窝夹芯板的损伤程度大;初始动能较大的球形鸟弹较圆柱形鸟弹对复合材料蜂窝夹芯板造成的冲击损伤程度更大。      

Strength evaluations of sinusoidal core for FRP sandwich bridge deck panels

Fiber-reinforced polymer (FRP) sandwich deck panels with sinusoidal core geometry have shown to be successful both in new construction and the rehabilitation of existing bridge decks. This paper is focused on an experimental study of the strength evaluations of a honeycomb sandwich core under out-of-plane compression and transverse shear. The sinusoidal core is made of E-glass Chopped Strand Mat (ChSM) and Polyester resin. The compressive, tensile and shear strengths were first obtained from coupon tests. The out-of-plane compression tests were performed on representative single-cell volume elements of sandwich panels, and the tests included “stabilized” samples to induce compression failure, and “bare” samples to induce local buckling of the core. Finally, four-point bending tests were conducted to study the structural strength behavior under transverse shear. Two types of beam samples were manufactured by orienting the sinusoidal wave either along the length (longitudinal) or along the width (transverse). Both typical shear failure mode of the core material and delamination at the core–facesheet bonding interface were observed for longitudinal samples. The failure for transverse samples was caused by core panel separation. For both single-cell and beam-type specimen tests, the number of bonding layers, i.e., the amount of ChSM contact layer and resin used to embed the core into the facesheet, and the core thickness are varied to study their influence. The experimental results described herein can be subsequently used to develop design guidelines.     

钢板夹泡沫铝组合板抗弯性能研究

试验设计了6块钢板夹泡沫铝组合板,其中无侧板组合板与有侧板组合板各为3块,侧板材料与面板相同,泡沫铝芯层厚度分别为40 mm、60 mm和90 mm。对组合板进行抗弯试验,绘制了组合板跨中荷载-位移（P-δ）曲线,记录了组合板变形失效过程。基于Gibson模型最大承载力公式建立了无侧板组合板的失效模式图。推导了有侧板组合板最大承载力计算公式,建立了失效模式图。结果表明:泡沫铝芯层厚度越大,组合板承载力越高,加载刚度越大。建立的失效模式图可以较好预测组合板的失效模式。与无侧板组合板相比,仅增加侧板,可以显著提高组合板的承载能力和加载刚度,有效限制泡沫铝开裂后裂缝的进一步开展。通常无侧板组合板每种失效模式仅独立对应失效模式图中一块区域,而有侧板组合板失效模式图被划分为四块区域,且表皮屈服失效模式独立对应两块区域。     

钢板夹泡沫铝组合板抗爆性能研究

鉴于泡沫铝材料优异的吸能特性和夹层结构在强度、刚度上的优势,提出了分层结构为钢板-泡沫铝芯层-钢板的抗爆组合板。对厚度为10 cm、7 cm和5 cm的组合板进行了5组不同装药量的爆炸试验,考察了各板在不同装药量爆炸条件下的变形及破坏情况,并对变形破坏过程进行了理论分析。研究表明:组合板承受爆炸冲击荷载时,通过局部压缩变形和整体弯曲变形吸收能量。钢板相同时,适当增大泡沫铝芯层厚度,增强面板与芯层间连接,可提高该组合板的抗爆性能,防止组合板发生剥离,减小其承受爆炸冲击荷载时产生的变形。     

钢板夹薄壁钢管组合板抗接触爆炸数值模拟

为了提升钢板夹薄壁钢管组合板抗爆性能,有效减轻接触爆炸对防护结构的破坏,对钢板夹薄壁圆钢管组合板和钢板夹薄壁方钢管组合板,采用ANSYS/LS-DYNA软件进行接触爆炸数值模拟。取1kgTNT炸药,选择t=400μs时,分析该2种钢管组合板在接触爆炸作用下的抗爆吸能效果。结果表明:钢板夹薄壁方钢管组合板整体弯曲强于圆钢管组合板,但局部变形能力弱于圆钢管组合板;方钢管组合板变形输出的内能值小于圆钢管组合板,且不受钢管壁厚和数量变化影响,防护效果弱于圆钢管组合板;随着方钢管截面尺寸的减小,整体跨中挠度增加,破口直径增大,吸能减小,输出内能值增大,且不受壁厚和数量变化的影响,抗爆性能增强。同时,通过3组钢板夹薄壁钢管组合板参数对比分析后得知,在钢管数量为3,钢管壁厚2mm时,抗爆能力相对于其他工况下增大的较多,此结果可为工程实践提供参考。     

Multi-objective optimal design of sandwich panels using a genetic algorithm

In this study, an optimization problem concerning sandwich panels is investigated by simultaneously considering the two objectives of minimizing the panel mass and maximizing the sound insulation performance. First of all, the acoustic model of sandwich panels is discussed, which provides a foundation to model the acoustic objective function. Then the optimization problem is formulated as a bi-objective programming model, and a solution algorithm based on the non-dominated sorting genetic algorithm II (NSGA-II) is provided to solve the proposed model. Finally, taking an example of a sandwich panel that is expected to be used as an automotive roof panel, numerical experiments are carried out to verify the effectiveness of the proposed model and solution algorithm. Numerical results demonstrate in detail how the core material, geometric constraints and mechanical constraints impact the optimal designs of sandwich panels.     

Investigation of elastic moduli of Kraft paper honeycomb core sandwich panels

In order to understand the influence of the thicknesses of Kraft paper honeycomb core and medium density fiberboard skins on the stiffness of the sandwich panel, the corresponding finite element models for the resulting sandwich panels were developed. The material properties for the core and skin components of these finite element models were determined using the published data and specifications. It was found that a decrease in the thickness ratio of the core to skin layer (shelling ratio) resulted in an increase in the modulus of elasticity and shear modulus of the sandwich panels. The increase was significant when the shelling ratio was smaller than six. Cell size only affected the modulus of elasticity of the sandwich panels under the flat-wise compression and panel’s inter-laminar shear modulus. Regression equations relating the stiffness of the sandwich panels to the shelling ratio and core cell size were obtained using the finite element model simulated results and were found to compare well with the existing models for layered wood composites.     

Foam core sandwich panels with interface disbonds

The influence of a face-to-core interface disbond on the strength of a foam core sandwich panel is investigated. The geometry considered is a square sandwich panel with a circular disbond subjected to a uniformly distributed pressure load. The disbond, located in the centre of the panel, is treated as a crack, and the finite element method is used to compute stress intensity factors. These are compared to fracture toughness data to predict the onset of crack growth and, thus, the reduction in load-bearing capacity. The analyses are verified with experiments on full-scale sandwich panels.