Stability of the Third Generation Intensifier under Illumination

The stability under illumination of transmission-mode GaAs photocathode sealed in the third generation intensifier is investigated by use of spectral response testing instruments. The variations of spectral response with the illumination times under weak and intense illumination are compared. The variations of photoemission performance parameters are also characterized. The results show that during initial several weak illuminations photocathode behaves no evident decay and a maximum sensitivity is achieved, while under intense illumination the sensitivity of photocathode begin to decrease largely at the first illumination. The calculated performance parameters show that the variation of surface escape probability with illumination times is a direct cause of instability of photocathode. It is also found that under intense illumination peak wavelength is moved towards short-wave and peak response is decreased, which shows that the ability of long-wave response of photocathode is decreased.     

Passive Acoustic Radar for Detecting Supersonic Cruise Missile

A Passive Acoustic Radar is presented as a necessary complement to electromagnetic wave radar, which will be expected to be an effective means for detecting cruise missiles. Acoustic characteristics of supersonic flying projectiles with diverse shapes are expounded via experiment. It is pointed out that simulation experiment could be implemented using bullet or shell instead of cruise missile. Based on theoretical analysis and experiment, the ““acoustic fingerprint““ character of cruise missile is illustrated to identify it in a strong noise environment. After establishing a locating mathematical model, the technique of acoustic embattling is utilized to resolve a problem of confirming the time of early-warning, considering the fact that velocity of sound is much slower than that of light. Thereby, a whole system of passive acoustic radar for detecting supersonic cruise missile is formed.     

Super-resolution Restoration of Remote-sensing Images

A novel image restoration scheme, which is super-resolution image restoration algorithm Poisson-maximum-afterword-probability based on Markvo constraint （MPMAP） combined with evaluating image detail parameter D, has been proposed. The advantage of super-resolution algorithm MPMAP incorporated with parameter D lies in the fact that superresolution algorithm MPMAP model is discrete, which is in accordance with remote-sensing imaging model, and the algorithm MPMAP is proved applicable to linear and non-linear imaging models with a unique solution when noise is not severe. According to simulation experiments for practical images, super-resolution algorithm MPMAP can retain image details better than most of traditional restoration methods; at the same time, the proposed parameter D can help to identify real point spread function （PSF） value of degradation process. Processing result of practical remote-sensing images by MPMAP combined with parameter D are given, it illustrates that MPMAP restoration scheme combined PSF estimation has a better restoration result than that of Photoshop processing, based on the same original images. It is proved that the proposed scheme is helpful to offset the lack of resolution of the original remote-sensing images and has its extensive application foreground.     

Design and Simulation of TF and TA Controller for Missile

A nonlinear terrain following(TF) and terrain avoidance(TA) controller is proposed for missile control systems. Based on classical TF algorithm (adaptive angle method), a new method for TF controller is proposed by using angle of attack. A method of obtaining terrain outline data from digital elevation map (DEM) for TF control is discussed in order to save store space. A TA algorithm is proposed by using bank-to-turn technique. The block control model, which is suitable for backstepping design, is given for nonlinear model of missile. Making full use of the characteristics of the system and combining block control principle and backstepping technique, a robust controller design method is proposed. Uncertainties in every sub-block are allowed, and can be canceled by using the idea of nonlinear damping. It is proved that the state tracking errors are converged to a neighborhood of the origin exponentially. Finally, nonlinear six-degree-of-freedom simulation results for the missile model are presented to demonstrate the effectiveness of the proposed control law.     

Design and Analysis of Test Schemes of Static Postponing Time on Shrapnels Used to Riot Control

The test scheme of static postponing time given in our actual national military test standard on shrapnels used to control riot is a nine-point test scheme on the combined action of three kinds of temperatures and three kinds of pressures,the consumed ammunitions are more excessive. Statistic analysis and tentative checkout about a lot of test data are done,feasibility gists are put forward for optimizing of the test design scheme. The optimizing design and data analysis of test scheme of the item are done by managing uniformity design theory, two scientific and reasonable six-point test schemes are confirmed. The feasibility and reliability of the optimizing design schemes put forward above are proved ulteriorly by test validating. The gained schemes not only have good design uniformity and little ammunition wastage and meet the test demand, but also have better forecast ability for the result data of other points using the mathematic models from the actual test points.     

Design of Non-fragile Satisfactory Estimator for Linear Continuous Perturbed Stochastic Systems

The design problem of non-fragile estimator is addressed for a class of perturbed linear continuous systems. The perturbations occur on the plant and estimator parameters. The estimator designed should force the error system to achieve the desired decay rate and force the steady error variance less than the specified upper bound irrdevancy of the admissible plant perturbations and estimator perturbations. Consistency problem of the decay rate with the variance upper bound is first considered via linear matrix inequality （LMI） approach. The solution of the estimator parameter under specifications to be consistent is then discussed. The consistency condition of specifications and estimator parameter solution are transformed to feasible or minimum problems subject to a set of LMI respectively. The method is illustrated by a numerical example.     

An Improved Scene-based Nonuniformity Correction Algorithm for Infrared Focal Plane Arrays Using Neural Networks

The improved scene-based adaptive nonuniformity correction （NUC） algorithms using a neural network （NNT） approach for infrared image sequences are presented and analyzed. The retlna-like neural networks using steepest descent model was the first proposed infrared focal plane arrays （IRFPA） nonuniformity compensation method, which can perform parameter estimation of the sensors over time on a frame by frame basis. To increase the strength and the robustness of the NNT algorithm and to avoid the presence of ghosting artifacts, some optimization techniques, including momentum term, regularization factor and adaptive learning rate, were executed in the parameter learning process. In this paper, the local median filtering result of Xij （ n ） is proposed as an alternative value of desired network output of neuron Xij （ n ）, denoted as Tij （ n ）, which is the local spatial average of Xij （ n ） in traditional NNT methods. Noticeably, the NUC algorithm is inter-frame adaptive in nature and does not rely on any statistical assumptions on the scene data in the image sequence. Applications of this algorithm to the simulated video sequences and real infrared data taken with PV320 show that the correction results of image sequence are better than that of using original NNT approach, especially for the short-time image sequences （several hundred frames） subjected to the dense impulse noises with a number of dead or saturated pixels.     

Piecewise Filter of Infrared Image Based on Moment Theory

The disadvantages of IR images mostly include high noise, blurry edge and so on. The characteristics make the existent smoothing methods ineffective in preserving edge, To solve this problem, a piecewise moment filter （PMF） is put forward. By using moment and piecewise linear theory, the filter can preserve edge. Based on the statistical model of random noise, a related-coefficient method is presented to estimate the variance of noise. The edge region and model are then detected by the estimated variance. The expectation of first-order derivatives is used in getting the reliable offset of edge. At last, a fast moment filter of double-stair edge model is used to gain the piecewise smoothing results and reduce the calculation. The experimental result shows that the new method has a better capability than other methods in suppressing noise and preserving edge.     

Bistatic Sonar Localization Based on Best Linear Unbiased Estimation

A best linear unbiased estimation （BLUE） algorithm for bistatic sonar localization is proposed. The Cramer-Rao bound for bistatic Sonar and the geometrical dilution of precision （GDOP） in different conditions are given. The simulation results show that the location accuracy of BLUE algorithm is higher than the weighted least square method.     

Research on Gear-broken Fault Diagnosis in a Tank Gearbox

A fault diagnosis method of working position gear in a tank gearbox is put forward based on simulating the fault of working position gear in an actual tank, extracting the envelope of vibration signal by Hilbert transformation amplitude demodulation method, and zooming the low-frequency band to envelope signal.     

Rapid Forming Process and Device of Small-size Booster Explosive Pellet

A rapid forming device for small-size booster explosive pellet is designed. The rationality of explosive processing is analyzed in theory and the realized process is presented. The experimental results show that the device can improve the internal quality of small-size explosive pellet and the obtained pellet has a good density distribution. The presented rapid forming process and device can provide a credible base for the precise testing and application of booster explosive to general weapons, aerospace and aeronautic weapons and nukes.     

Hydrodynamics Research on Amphibious Vehicle Systems： Engineering Application

Based on the modeling theoretical research of the amphibious vehicle systems, a simulation computed architecture on the state space expressions of hydrodynamics for amphibious vehicle systems are educed, and simulation computed results of navigation characteristics, vibration-impact characteristics, firing-hitting characteristics for amphibious vehicle on water are given. It is shown that the hydrodynamic research on amphibious vehicle systems is necessary and feasible.     

Customization Product Design Based on User‘s Emotion and Needs

The paper presents a design method that ensures the ingenuity of the product form as well as the whole and exact expression of user‘s needs. The key idea is to establish an automatic design system which can transform the users language needs into the product features in real-time. A rifle was taken as a research instance and soldiers were chosen as evaluation customers. The theory of fuzzy set and semantic difference are adopted to evaluate the relationship between user‘s needs and product features as well as their alternatives. FAHP (fuzzy analytic hierarchy process) is utilized to judge the users satisfactory forms. This method can also be applied to other product form designs.     

An Object Threat Assessment Method Based on Indefinite Multiple Attribute Decision Making

On the basis of characteristics of threat assessment of aerial defense, a kind of MADM （multiple attribute decision making） method with unknown attribute weights and biased project on decision-maker is put forward. It can be used in dealing with the object threat assessment problem. A computing formula on project preference of decision-maker and one model of obtaining attribute optimization weight are set up. The method improves the veracity and reliability of computing object threat assessment, and the simulating result shows that this method is valid.     

Theoretical Investigation and Experimental Verification of Passive Simulation of Metal Plate Infrared Thermal Characteristics with That of PCM

A one-dimensional thermophysical model is used to investigate the simulation of the infrared thermal signature of mental plate with phase change material（PCM） plate theoretically. The optimized parameters are obtained by the theoretical calculations. Based on the calculation results, a kind of organic PCM is selected to experir＊entally verify the model, and the good match between the theoretical and experimental results is achieved. The results of this investigation provide the design rules and key materials for the application of PCMs in false target.     

Analysis of Heat Transfer in Actively Cooled Compound Gun Barrel

when a gun fires, a large amount of heat is brought in the barrel. Erosion/wear and security problems(self ignition of the propellant) associated with this high thermal energy have to be solved owing to the use of higher combustion gas temperature for improved cannon performance and firing at the sustained high rates, Barrel cooling technologies are the effective measures for addressing this issue, In view of the importance of having knowledge of the heat flux, an approach to calculate heat flux based on measurements was presented and validated. The calculated heat flux is used as the inner boundary condition for modeling heat transfer in a 155 mm mid-wall cooled compound gun barrel, Theoretical analysis and simulated results show that natural air cooling is dramatically slower than the forced liquid mid-wall cooling, accordingly wear life of actively cooled barrel is increased and barrel overheating is prevented,     

A Hierarchical Sensor Network Based on Voronoi Diagram

A hierarchical sensor network is proposed which places the sensing and routing capacity at different layer nodes.It thus simplifies the hardware design and reduces cost. Adopting Voronoi diagram in the partition of backbone network,a mathematical model of data aggregation based on hierarchical architecture is given. Simulation shows that the number of transmission data packages is sharply cut down in the network, thus reducing the needs in the bandwidth and energy resources and is thus well adapted to sensor networks.     

Particle Velocity Measurement for Spherical Wave in Solid

An experimental technique for research on spherical divergent wave propagation in a solid has been developed, in which the source of generating spherical wave is a center initiating explosive charge designed in a mini-spherical shape with yield equivalent to 0. 125 g and 0. 486 g TNT and a set of circular electromagnetic particle velocity gages is used to record the particle velocity histories. By using the circular electromagnetic particle velocity gages, the signal outputs not only are unattenuated due to the geometrical divergence, hut also represent the average of the measured dynamic states of the medium over a circle on the wavefront. The distinctive features of this technique are very useful for the study of spherical divergent wave propagation in a solid, especially in an inhomogeneous solid, and the corresponding material dynamics. Many experimental measurements were conducted in polymethylmethacrylate （PMMA） and granite by means of the technique, and the reproducibility of tests was shown to be good. The measurement technique of the circular electromagnetic particle velocity gages is also suitable to the case of cylindrical wave.     

Design for Quick Evaluating Platform of Servo System Status

At present, the composite application platforms are seldom developed which can quickly evaluate the status and detect the faults of the major weapon equipment. According to the circumstances, the electro-hydraulic servo system is investigated, which is the very important component of the control system in the launch vehicle or missile. A quickly status evaluating technology for complex large equipment is researched. A composite application platform framework for the fault diagnosis and status evaluation of theservo system is devised. The result of the research can be extended to the application for other complex large equipment.