Textural Properties of Cold-set Gels Induced from Heat-denatured Whey Protein Isolates

A 9% whey protein (WP) isolate solution at pH 7.0 was heat-denatured at 80°C for 30 min. Size-exclusion HPLC showed that native WP formed soluble aggregates after heat-treatment. Additions of CaCl2 (10–40 mM), NaCl (50–400 mM) or glucono-delta-lactone (GDL, 0.4–2.0%, w/v) or hydrolysis by a protease from Bacillus licheniformis caused gelation of the denatured solution at 45°C. Textural parameters, hardness, adhesiveness, and cohesiveness of the gels so formed changed markedly with concentration of added salts or pH by added GDL. Maximum gel hardness occurred at 200 mM NaCl or pH 4.7. Increasing CaCl2 concentration continuously increased gel hardness. Generally, GDL-induced gels were harder than salt-induced gels, and much harder than the protease-induced gel.     

Occurrence of bisphenol-F-diglycidyl ether (BFDGE) in fish canned in oil

The levels of bisphenol-F-diglycidyl ether (BFDGE) were quantified as part of a European survey on the migration of residues of epoxy resins into oil from canned fish. The contents of BFDGE in cans, lids and fish collected from all 15 Member States of the European Union and Switzerland were analysed in 382 samples. Cans and lids were separately extracted with acetonitrile. The extraction from fish was carried out with hexane followed by re-extraction with acetonitrile. The analysis was performed by reverse phase HPL C with fluorescence detection. BFDGE could be detected in 12% of the fish, 24% of the cans and 18% of the lids. Only 3% of the fish contained BFDGE in concentrations considerably above 1mg/kg. In addition to the presented data, a comparison was made with the levels of BADGE (bisphenol-A-diglycidyl ether)analysed in the same products in the context of a previous study.     

The development of reference materials for paralytic shellfish poisoning toxins in lyophilized mussel. I: Interlaboratory studies of methods of analysis

This paper describes the first part of a project undertaken to develop mussel reference materials for Paralytic Shellfish Poisoning (PSP) toxins. Two interlaboratory studies were undertaken to investigate the performance of the analytical methodology for several PSP toxins, in particular saxitoxin (STX) and decarbamoyl-saxitoxin (dc-STX) in lyophilized mussels, and to set criteria for the acceptance of results to be applied during the second part of the project: the certification exercise. In the first study, 18 laboratories were asked to measure STX and dc-STX in rehydrated lyophilized mussel material and to identify as many other PSP toxins as possible with a method of their choice. In the second interlaboratory study, 15 laboratories were additionally asked to determine quantitatively STX and dc-STX in rehydrated lyophilized mussel and in a saxitoxin-enriched mussel material. The first study revealed that three out of four postcolumn derivatization methods and one pre-column derivatization method sufficed in principle to determine STX and dc-STX. Most participants (13 of 18) obtained acceptable calibration curves and recoveries. Saxitoxin was hardly detected in the rehydrated lyophilized mussels and results obtained for dc-STX yielded a CV of 58% at a mass fraction of 1.86 mg/kg. Most participants (14 out of 18) identified gonyautoxin-5 (GTX-5) in a hydrolysed extract provided. The first study led to provisional criteria for linearity, recovery and separation. The second study revealed that 6 out of 15 laboratories were able to meet these criteria. Results obtained for dc-STX yielded a CV of 19% at a mass fraction of 3.49mg/kg. Results obtained for STX in the saxitoxin-enriched material yielded a CV of 19% at a mass fraction of 0.34mg/kg. Saxitoxin could not be detected in the PSP-positive material. Hydrolysis was useful to confirm the identity of GTX5 and provided indicative information about C1 and C2 toxins in the PSP-positive material. The methods used in the second interlaboratory study showed sufficiently consistent analysis results to undertake a certification exercise to assign certified values for STX and dc-STX in lyophilized mussel.     

Microbiology of food taints

Fresh and processed foods are often spoilt by the presence of undesirable flavours and odours caused by microbial action. The aim of this paper is to review the current knowledge of microbiologically induced taints that occur in a wide range of foodstuffs, including meats, poultry, fish, crustaceans, milk, dairy products, fruits, vegetables, cereals and cereal products. Examples have been chosen where the compounds responsible for the taint have been identified and sufficient data obtained to demonstrate the involvement of microorganisms. However, in some cases the full identity of the causative organism may not have been elucidated. The types of microorganisms covered by this review include bacteria, fungi, yeasts, actinomycetes and cyanobacteria. Although cyanobacteria do not in general infect foods, their presence in aqueous systems and water supplies can lead to off-flavours in aquatic organisms and processed foodstuffs. Several examples of each of these processes are discussed. Wherever possible, the likely biosynthetic pathway used by the microorganism to produce the offending compound in a foodstuff is indicated.     

Food allergy—towards predictive testing for novel foods

The risks associated with IgE-mediated food allergy highlight the need for methods to screen for potential food allergens. Clinical and immunological tests are available for the diagnosis of food allergy to known food allergens, but this does not extend to the evaluation, or prediction of allergenicity in novel foods. This category includes foods produced using novel processes, genetically modified (GM) foods, and foods that might be used as alternatives to traditional foods. Through the collation and analysis of the protein sequences of known allergens and their epitopes, it is possible to identify related groups which correlate with observed clinical cross-reactivities. 3-D modelling extends the use of sequence data and can be used to display eptiopes on the surface of a molecule. Experimental models support sequence analysis and 3-D modelling. Observed crossreactivities can be examined by Western blots prepared from native 2-D gels of a whole food preparation (e.g. hazelnut, peanut), and common proteins identified. IgEs to novel proteins can be raised in Brown Norway rat (a high IgE responder strain), and the proteins tested in simulated digest to determine epitope stability. Using the CSL serum bank, epitope binding can be examined through the ability of an allergen to cross-link the high affinity IgE receptor and thereby release mediators using in vitro cell-based models. This range of methods, in combination with data mining, provides a variety of screening options for testing the potential of a novel food to be allergenic, which does not involve prior exposure to the consumer.     

Peptides from milk proteins and their properties

This review has attempted to study the literature pertaining to peptides derived from milk proteins. Hydrolysis of milk proteins to generate peptides has been practiced for a long time and it was recognized early on in this process that the taste of hydrolyzates might hinder use of these products in food formulations. Modification of protein is necessary to form a more acceptable or utilizable product, to form a product that is less susceptible to deteriorative reactions and to form a product that is of higher nutritionall quality. Modifications may be achieved by a number of chemical and enzymatic means. This review has considered only enzymatic modification of dairy proteins. Modified proteins contain peptides and some of these peptides have been purified and their functionalities have been compared with unmodified proteins. This paper has examined the literature pertaining to improvement in functionality of enzyme-modified proteins. Improvements in solubility, emulsification, foaming and gelation were examined. There is limited information available on the sequence of the peptides necessary to improve the functional characteristics of proteins. Knowing the sequences of desirable functional peptides can lead to genetic alteration of proteins to improve functionality. Addition of synthetic peptides to intact proteins may be another way in which the functionality of proteins can be augmented. Some of the peptides in milk proteins are capable of affecting biological functions of an organism. These effects can be antimicrobial and probiotic, i.e., prevent the growth and proliferation of undesirable and pathogenic organisms, or they may promote the growth of desirable bacteria in the digestive tract of humans and animals. Peptides derived from milk protein have been shown to exert digestive and metabolic effects as well. They may also influence the immune system. These biological effects may play an important role in the development of medical foods that treat or mitigate the effects of diseases. Proteins are allergens and therefore it is possible that products derived from modification of proteins may also be allergens. The known literature about the allergenicity of peptides derived from milk proteins has been examined in this article. Last, but not the least, the taste attributes of peptides is also considered. Bitterness of hydrolyzates is a common occurrence and the origins of these bitter peptides and possible ways of mitigating this sensory defect has been discussed. Many of the peptides that enhance functionality and exert biological activity are likely to be bitter. Therefore, the bitter taste of hydrolysis products has to be dealt with in boosting the functional or nutraceutical aspects of foods containing these peptides. Analytical techniques for sequencing peptides have become more accessible and purification of peptides is commercially feasible. Computer based modeling techniques have aided the prediction of structures in these peptides. These advances, coupled with the advances in biotechnology, promise to revolutionize the future of nutraceutical and functional foods.     

Measurement of paralytic shellfish toxins in molluscan extracts: comparison of the microtitre plate saxiphilin and sodium channel radioreceptor assays with mouse bioassay, HPLC analysis and a commercially available cell culture assay

This study compared five methods of measuring paralytic shellfish toxins (PSTs) including the long-used mouse lethality bioassay, a commercially available cell culture test (MIST ® Quantification kit), HPLC analysis, and two newly developed radioreceptor assays utilizing mammalian sodium channels and saxiphilin. Methods were challenged with toxic shellfish extracts prepared according to the AOAC official method. The best correlations between predicted toxicity values being 0.9 or better, were those between HPLC analysis when compared with both radioreceptor assays and the mouse lethality bioassay, as well as that between the saxiphilin and the sodium channel radioreceptor assays. In all cases, statistically significant correlations existed between the toxicity measurements of the same extracts. The ratios between some methods were not unitary as measured by the slopes of the regression lines used for correlation analyses. HPLC analysis predicted more toxicity than all of the bioassays. The saxiphilin assay underestimated toxicity relative to the mouse bioassay, the MIST ® kit determinations and the sodium channel assay. The sodium channel assay predicted there to be less toxicity than the mouse bioassay and the MIST ® kit. Of all of the techniques used, the MIST ® kit correlation with the mouse bioassay was nearest to one. Each method possesses different virtues and it may be that a multi-method approach would harness the benefits of each method for various aspects of a shellfish testing regime.     

内切葡聚糖酶在漂白硫酸盐浆酶法改性中的作用

最近,纤维素和半纤维素酶在浆纸工业的应用引起相当大的关注,并且有些纤维素酶已顺利地投入实际生产线。Pommier等人报道了一种利用Lifiase A-40酶改进浆料滤水性能的方法,]     

Progress in reducing the pale, soft and exudative (PSE) problem in pork and poultry meat

Research in the area of the pale, soft and exudative (PSE) pork and poultry meat is reviewed in this article with an emphasis on genetic, biochemical and metabolic factors contributing to the problem. Over the past five decades, there has been much more work in the pork meat area where a few genetic markers have been identified, and are currently used to remove susceptible animals from the herd. Some of the markers are linked to aberrant calcium regulation in the early postmortem muscle. The poultry industry is still not at the point of using genetic marker(s); however, some recent work has revealed several potential markers. The review also discusses environmental factors such as antemortem stress and early postmortem processing practices (e.g. chilling rate) that can influence the development and severity of the PSE phenomenon. Some of these factors are known to cause protein denaturation at the early stage of postmortem and directly contribute to poor water-holding capacity and inferior texture in fresh meat and later in processed products. A newer hypothesis suggesting that variation in protein oxidation, in response to antemortem stress and early postmortem tissue environment, can contribute to development of PSE pork is also discussed. Finally, a few recommendations for future work are proposed.     

Review of techniques to manufacture micro-hydrogel particles for the food industry and their applications

Microgels are ‘soft’ microscopic cross-linked polymeric particles that are being increasingly exploited in a variety of industries for rheology control, encapsulation and targeted delivery. They are valued because of the ability to tune their functionality to address specific applications in oil recovery, coatings, drug delivery, cosmetics, personal care and foods. Food microgels are typically biopolymer hydrogels in the form of microspheres, nanospheres (also called nanogels), spheroids and fibres. The utilisation of engineered microgels in foods has so far been limited, despite their great potential to address several needs in the food industry, including: satiety control, encapsulation of phytonutrients and prebiotics, texture control for healthier food formulations (e.g. reduced fat products), and targeting delivery to specific areas in the digestive tract. We review the scientific and patent literature on the utilisation and manufacturing methods for producing microgels with an emphasis on micro-hydrogels for food applications.