共查询到19条相似文献,搜索用时 15 毫秒
1.
2.
本文介绍了在模腔外冷却定型的塑料筒管轴向脱模力的测试方法,分析了影响轴向脱模力的因素并提出减小轴向脱模力的措施,为塑料筒管结构和成型工艺设计提供了理论依据。 相似文献
3.
4.
合模力是反映塑料注射成型机加工制品能力大小的基本参数。因而,合模力被作为一个主要参数进行检测。本文结合合模力的测试方法,根据我们对24台普通注射机实测获得的经验和数据,对合模力测试中的误差作了系统分析,并指出了提高合模力测试精度的途径 相似文献
5.
通过分析确定了塑料拔杆的结构和材料。研究了注塑成型过程中引起制品充填不足、飞边和变形等缺陷的原因,采用工艺参数调整和改进浇口位置的方法。最大限度地纠正了制品成型过程中可能出现的问题。有限元分析软件Moldflow的模拟结果还表明该方法能提高制品的强度。 相似文献
6.
7.
8.
一、前言众所周知,挤吹中空成型是以热塑性塑料为原料,制造中空制品的成型技术。最初,研制这种成型技术的目的是制造塑料瓶,以代替某些玻璃瓶和金属容器。这种传统的成型技术在合模装置、模具、型坯入模及制品等方面的主要特点是,合模装置及合模方向与挤出机的挤出喷嘴及挤出的型坯相互垂直;模具的分型面为一竖直的平面;合模力垂直于模具的分型面;两半模具合紧时型坯的对称中心面与模具的分型面重合;挤吹中空制品的形状为面对称直筒状等。目前这种 相似文献
9.
10.
介绍了气辅注射成型中的CAE分析方法,阐述了气辅制品缺陷与工艺参数的关系。并通过塑料成型过程分析软件M o ld f low P lastic Insight 5.0对制品进行FLOW-COOL-FLOW分析,调整工艺参数达到消除气辅缺陷的目的。 相似文献
11.
通过试验分析,得出稳定化处理温度与PC钢丝强度指标下降的定量关系。由此推论出一定温度和张应力配合将使被处理钢绞线发生塑性变形,同时对稳定化处理温度的选择提出建议。 相似文献
12.
13.
塑料食品包装材料为了达到应有的机械强度,韧性,常常需要在包装材料中添加一些加工助剂,但这些加工助剂在包装材料包装食品的过程中,会迁移到食品中,从而对人体产生危害。本文综述了塑料食品包装材料中添加的四大类受限物质,包括增塑剂、抗氧化剂、热稳定剂以及紫外吸收剂,检索了在中国期刊全文数据库CNKI和Web of Science中相关文献的信息,系统地分类分析了查阅到的文献,并且介绍了4类添加剂的作用机制和目前国内国外对4类添加剂发生迁移的研究现状,比较了我国与发达国家关于4类受限物质的法律法规及迁移限量,提出了减少食品中受限物质迁移量的方法措施以及加强我国塑料食品接触材料中受限物质使用与管理的建议。 相似文献
14.
15.
基于Pro/E的电话机前盖模具设计及NC加工 总被引:1,自引:0,他引:1
为满足塑料制品生产的需求,缩短塑料模具的设计和加工周期。采用了Pro/E软件设计电话机前盖塑料模具及其加工工艺,首先利用该软件的造型功能对塑料制品进行造型设计;然后按制品的特点在模具设计模块中快速分模,生成模具型腔实体图;最后利用软件的NC模块对模具型腔辅助编程并对程序进行加工仿真、检测修改刀具路径,生成加工G代码,完成后传输到数控机床即可对模具型腔进行加工。 相似文献
16.
Thermal Sterilization of Conduction-Heated Foods in Plastic Cylindrical Cans Using Convective Boundary Condition 总被引:2,自引:0,他引:2
A mathematical model was developed to evaluate thermal processing of foods in cylindrical plastic cans. This model included convective heat transfer coefficients for heating and cooling media, thermal diffusivities of plastic can wall and the canned food, and contact conductance between the plastic wall and the canned food. Temperatures estimated by the model at the coldest point in a can agreed closely with those determined experimentally during thermal processing. Thermal diffusivity of can wall and heat transfer coefficients of heating and cooling media considerably influenced the sterilizing values of the processed food. 相似文献
17.
Die Verbindung von Meß-und Regeltechnik mit der Prozeß-Datenverarbeitung in der Spanplattenfertigung
L. Wolf 《Holz als Roh- und Werkstoff》1982,40(10):373-376
A high degree of automation and quick detection and elimination of disturbing factors are basic conditions for economy in particleboard production. For this end measuring and control systems will in future inereasingly be used, linked, if possible, with suitable data processing. This paper describes current measuring, control and data processing systems and their applicability to available and measurable industrial production data. In the course of production (i.e. during chip production and processing, drying, mixing of chips and glue, spreading, hot pressing) these data become available in varying extents and with varying degrees of accuracy. Some processing data can be measured directly, others have to be determined indirectly, i.e. by correlative calculation. Finally, suggestions are made for a step-bystep build-up of measuring, control and data processing equipment. 相似文献
18.
19.
通过改变聚乙烯塑料在乙酸环境下的浓度、浸泡温度、浸泡时间,应用ICP-MS测定聚乙烯塑料浸提液中铅的含量.试验表明,在乙酸为浸提液的条件下,浸泡温度对聚乙烯中铅的迁移量影响最大,乙酸浓度其次,浸泡时间影响很小.通过试验能够更加科学的使用聚乙烯塑料,避免食品加工过程产生的二次污染. 相似文献