排序方式: 共有13条查询结果,搜索用时 437 毫秒
1.
In order to study reasonable sintering technological parameters and appropriate copper powder size range of micro heat pipe
(MHP) with the sintered wick, the forming principle of copper powders in wicks and MHP’s heat transfer capabilities were first
analyzed, then copper powders with different cell sizes and dispersions were sintered in RXL-12-11 resistance furnace under
the protection of the hydrogen at different sintering temperatures for different durations of sintering time, and finally
the sintered wicks’ scanning electron microscope (SEM) images and their heat transfer capabilities were analyzed. The results
indicate that the wick sintered with copper powders of larger cell size or smaller size range has better sintering properties
and larger heat transfer capabilities; and that the increase of either sintering temperatures or sintering time also helps
to improve the wick’s sintering properties and heat transfer capabilities, and the former affects more obviously than the
latter. Considering both its manufacturing cost and performance requirements, it is recommended that copper powders with the
size range of 140–170 μm are sintered at 900–950°C for 30–60 min in practical manufacturing. In addition, two approaches to
improve wick’s porosity are also proposed through theoretical analysis, which suggests that the larger the wick’s porosity,
the better the heat transfer capabilities of the MHP. 相似文献
2.
通过利用计算机图形学和计算机数据结构的基本原理,以Visual C 6.0和ObjectARX2000为开发工具,对MDT6.0进行二次开发,就可不必区分单个图形,而是把所有的直线、圆或圆弧都看作一个个特定的对象,然后再对它们进行分类处理,分别提取它们的图形信息并计算出所需要的数据,并利用这些数据计算出冲模的冲裁力。只需进行简单、直观的操作就可以快速准确地求出各种复杂形状冲裁件、多凸模冲裁件的冲裁力,解决了冲模的冲裁力计算困难的问题,为以后的模具设计做好了必要的准备。 相似文献
3.
近年来,智能手机飞速发展并普及,低头族的时代也随之到来,似乎生活的方方面面都可以集中于方寸之间的手机屏幕上。文字,作为一种信息交流的元素,出现在手机屏幕上,给用户传达信息,足见屏显字体的重要性。文章对过去、现在的屏显字体设计进行分析、整理,并提出对未来屏显字体设计方向的新思考。 相似文献
4.
以AIBN为引发剂在氯仿溶剂中成功地合成了耐热型苯乙烯-苯乙烯/N-(α-甲基-丁酯基)-马来酰亚胺共聚物(St-co-BAM)。通过IR、TG、DTA对共聚物的表征,研究了其耐热性能;讨论了单体全程配比、温度、引发剂浓度对共聚合初始速率的影响,测得共聚合总活化能Ea=76.2kJ/mol,共聚合增长活化能Ep=13.4kJ/mol,比一般的正常乙烯基单体Ep值小。 相似文献
5.
介绍了利用ObjectARX2000和VC 6.0对MDT6.0进行二次开发,可以自动判断凸、凹模工作部分磨损后尺寸的变化情况,从而可以选择相应的计算公式自动计算其尺寸和公差,并可以根据计算出来的尺寸自动完成凸、凹模的绘图工作及尺寸和公差的标注。大大减少了计算和绘图的工作量,从而缩短了模具设计周期,提高了模具设计效率。 相似文献
6.
7.
8.
9.
伴随着建筑行业市场的整体收缩,建筑设计行业效益也逐渐下滑,因此,提高建筑设计团队内部的协作效率已经成为当务之急。通过建立概念模型,并联系实际情况比较团队内部各类人员的职能关系,寻找团队协作的痛点和目前市面上团队协作软件的不足之处,设计出适用于建筑设计团队工作场景的软件系统,提高管理协作效率。 相似文献
10.