Designing Semipermeable Hydrogel Shells with Controlled Thickness through Internal Osmosis in Triple-Emulsion Droplets

Hydrogel shells that compartmentalize the water core from the aqueous surrounding provide molecular selectivity on size and charge in transmembrane transport. It is highly demanding to produce thin hydrogel shells to minimize diffusion length and maximize core volume. Here, internal osmosis in water-in-oil-in-water-in-oil (W/O/W/O) triple-emulsion droplets is used to produce thin hydrogel shells enclosing a large water core. The triple-emulsion droplets are prepared to have an ultrathin middle oil layer using a capillary microfluidic device. The innermost water droplet has a higher osmolarity than the outer water layer containing photopolymerizable hydrogel precursors, which pumps water from the outer layer to the core through the ultrathin oil layer by the osmosis. Therefore, the outer layer gets thinner and hydrogel precursors are enriched while the size of the triple-emulsion droplets remains unchanged. Through photopolymerization of precursors and phase transfer from oil to water, hydrogel shells enclosing water core are produced in the water environment; the oil layer is ruptured for molecular exchange through the shells. The thickness and composition of the hydrogel shells are precisely controllable by the osmotic conditions. The shells show a high permeation rate due to the thinness as well as controlled cut-off threshold of permeation for neutral and charged molecules.     

新2级能效低噪音节能环保变压器的研发设计

随着电力变压器新版能效标准于2021年6月1日起正式实施,如何降低变压器的损耗成为各生产厂家面临的主要课题.研发中首次使用宝武钢铁公司生产的低损耗B20R065硅钢片,通过电磁计算、结构设计、工艺制造等一系列的保障措施,试制出SB20-M-2500/10.5新2级能效低噪音节能环保叠铁心变压器,并通过型式试验验证了技术方案的可行性.     

碘量法—原子吸收光度法测金的方法对比

总结了目前金矿矿山企业实际生产过程中金含量的测定方法的种类及简单的测定原理,并具有针对性的介绍了实际生产中常用的两种测定方法—活性炭富集碘量法和活性炭富集原子吸收法。因两种测定方式中前期的试样处理及富集过程较为相似,于是将两种测定方法的原理,操作过程,数据结果对比分析等方面做了较为详细的讨论。对两种方法在实际操作中存在的问题给予分析,具有较高的实际生产指导意义。     

某纯电动车高压关键零部件布置方案研究

以某款A0级纯电动汽车研发为例,介绍高压关键零部件在整车上的布置方案和在布置过程中应当注意的问题,包括动力电池、动力总成、高压配电盒、电机控制器、车载充电机布置方案、电动空调压缩机以及其他关键零部件的合理布置方案,为后期车型开发提供参考.     

机载光电雷达它机试飞技术研究

机载光电雷达受平台及大气环境影响较大,而它机试飞能有效规避研制风险,是产品研制的必经阶段。本文介绍了机载光电雷达它机试飞试验系统组成、试验流程和数据处理等内容。经工程验证,实施过程满足任务需求,对其他光电系统的它机及本机试飞具有参考价值。     

印度卫星导航系统发展及现状研究

介绍了印度 GPS 辅助型静地轨道增强导航系统(GAGAN)和印度区域卫星导航系统(IRNSS)的最新研究进展，重点介绍了 IRNSS 系统的体系结构、信号样式和导航电文，分析了 IRNSS 系统的能力，最后介绍了印度导航系统的发展计划。     

基于三相幅度测量的相控阵天线快速校准方法

提出了一种基于三相幅度测量的相控阵天线快速校准方法。该方法将天线阵列进行分组,利用每种分组在三种配相下的阵面合成场幅度测量值,可解算出各个天线单元的初始幅相值。该方法仅需幅度测量,避免了相位测量误差影响单元幅相值的计算精度,而且所需幅度测量次数仅为(2N+1)次,可显著提高校准时效性。另外,利用分组思想,同时改变多个单元相位,使总辐射场的幅度变化显著,提升校准准确性。仿真结果表明:校准后相位均方根误差为2.2°,幅度均方根误差为0.2 dB。     

面源红外诱饵对抗红外制导导弹干扰策略研究

面源红外诱饵使用的过程中,合理有效的干扰策略是干扰红外制导导弹的关键,针对这一问题,通过理论分析与仿真模拟相结合得到面源红外诱饵对抗红外制导导弹的干扰策略。首先以红外成像制导导弹为例,介绍红外制导导弹的仿真模型,然后将攻击过程分为锁定前与锁定后,以命中率为评价指标,得到两个阶段下的最佳干扰策略,包括诱饵的最佳释放时机、释放间隔以及载机应采取的机动动作等。     

伪码连续波交会对接雷达信号处理机设计

介绍了某伪码连续波交会对接雷达信号处理机设计.在测距中,提出用噪声较小的载波相位△伪距测量值对伪距进行处理,得到高精度测距值.在测角中,提出了一种干涉仪天线阵结构和干涉仪解模糊算法,针对通道载波相位误差可能引起的解模糊错误,又提出了一种纠正方法,仿真显示,在发生解模糊错误的概率高达0.42的情况下,该方法仍然可以识别并纠正所有解模糊错误.实验表明,该信号处理机可以满足空间航天器交会对接的要求.     

Blind estimation of OFDM carrier frequency offset via oversampling

Blind deterministic estimation of the orthogonal frequency division multiplexing (OFDM) frequency offset via oversampling is proposed in this paper. This method utilizes the intrinsic phase shift of neighboring sample points incurred by the frequency offset that is common among all subcarriers. The proposed method is data efficient - it requires only a single OFDM symbol to achieve reliable estimation, hence making it more suitable to systems with stringent delay requirement and mobility-induced channel variation. The proposed scheme is devised to perfectly retrieve frequency offset in the absence of noise. Quite remarkably, we show that in the presence of channel noise, this intuitive scheme is indeed the maximum likelihood estimate of the carrier frequency offset. The possible presence of virtual carriers are also accommodated in the system model, and some interesting observations are obtained. The Cramer-Rao lower bound is derived for the oversampling-based signal model, and we show through numerical simulation that the proposed algorithm is efficient. Practical issues such as identifiability, the front-end filter bandwidth, and the possible presence of correlated noises are also carefully addressed.