复杂膨胀性围岩条件下交岔点支护技术研究

针对复杂膨胀性围岩条件下交岔点高应力集中区围岩稳定性控制和支护技术难题，通过对交岔点围岩变形表现形式、交岔点围岩变形机理的研究分析，提出了交岔点支护难点及重点。基于围岩控制理论分析，提出了“有限让压的柔性支护+全断面封闭抗压的刚性支护技术”，前期柔性支护采用“高强、高预应力锚杆+锚索+喷浆”联合支护有限度控制围岩变形，允许围岩在可控范围内释放围岩应力|后期通过架设异形支架与支撑架组成的联合支护体并喷射混凝土对交岔点围岩进行全断面封闭抗压支护，有效控制巷道交岔点围岩的变形。确保了交岔点围岩变形的整体可控性、稳定性，达到了预期支护效果。     

水量还原方法及合理性检查

文中详细地阐述了取河水、井水、水库水、跨流城引(排)水等不同情况进行还原的具体方法步骤。并对水量还原成果提出合理性检查措施。     

具有控制项的限定记忆卡尔曼滤波器

在已有的限定记忆卡尔曼滤波器的基础上 ,将确定性先验信息作为控制项加以应用 ,推导出了完整的限定记忆卡尔曼滤波公式 ,从而在记忆长度确定的情况下 ,有效地减小了模型不准的误差 ,降低了滤波总误差。仿真同样表明了该方法的有效性     

动力载波控制接收机限幅干扰分析

通过对载波接收机限幅干扰分析 ,提出电路改进的办法。     

基于运动的摄像机定标方法的综述

该文从运动方式角度将摄像机定标方式分为非限定运动方式和限定运动方式两大类,分别对摄像机各种运动方式对定标技术的影响进行了系统的研究,在应用中应该根据具体情况选择合适的摄像机的运动方式,以满足实际问题的需要。     

有限缓冲区FMS的特征分析与托盘配置

本文研究了Ｊｏｂ－Ｓｈｏｐ型有限缓冲区ＦＭＳ的运行特性及托盘优化配置问题，给出了系统的分析模型及托盘优化算法。本文的结果对系统的分析与设计具有重要的实际意义。     

G.652光纤上的2.5Gbit／s色散受限系统

本文根据色散受限中继段长度的计算，对实际工程中１５５０ｎｍ波长２．５Ｇｂｉｔ／ｓ系统进行计算比较得出啁啾声引起的色散不容忽视，它使２．５Ｇｂｉｔ／ｓ成为色散受限系统。对１３１０ｎｍ波长６２２Ｍｂｉｔ／ｓ系统，当使用多纵模激光器时，往往也会成为色散受限系统。     

堆载预压法加固软基土体稳定性的有限元分析

堆载预压过程中,进行相应的稳定分析对于控制加载速率、确定加载高度是必须进行的一项工作,采用有限单元法对此进行了探讨,详细阐述了有限元理论分析边坡稳定的几种重要因素,并考虑分步堆载的特点,模拟堆载过程,具有一定的工程实际意义。     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

Space-charge-limited currents for organic solar cells optimisation

Basic suppositions and microphysical origin of the occurrence of the space-charge-limited currents (SCLC) are presented in general and for the temperature-modulated space-charge-limited currents (TM-SCLC) in particular. The criteria are given for the spectroscopical method TM-SCLC to be used for localized electron states elucidation in organic semiconducting materials for organic solar cells optimization and modelling. The “visibility “of the localized states by SCLC method, i.e. the power of the SCLC method to distinguish the localized states, is tested by the modelling, varying the temperature, energy position of localized states and their concentration. Generally, it was determined that the SCLC measurements results are more reliable with the increased energy of the states, with their increased concentration and with decreased temperature. The correlation (or its absence) between the measured current and activation energy on applied voltage, expressed by the dependence of preexponential factor of conductivity on activation energy (Meyer–Neldel rule), gives the possibility to determine the energy range where the reconstruction of density of localized states function is reliable.