木姜子挥发油与β-环糊精包合工艺的优化

以新鲜木姜子果实为原料,通过水蒸气蒸馏法提取木姜子挥发油;利用饱和水溶液法进行β-环糊精与挥发油包合物的制备,包合工艺的优化采用星点设计-响应面法进行。结果表明,木姜子挥发油与β-环糊精最佳包合工艺为:投料比1:5.77(mL:g),包合时间4.09 h,包合温度51.5℃。利用UV、IR、TG和SEM对包合物表征,表征结果显示,木姜子挥发油与β-环糊精已经形成包合物。研究结果可为木姜子挥发油的进一步实际利用提供可靠参考。     

喹啉类杂环化合物的设计与合成研究

通过Vilsmeier反应合成了2-氯-3-甲酰基喹啉中间体,利用该化合物设计合成了一系列新的多杂原子稠环化合物,并通过核磁氢谱、红外光谱、元素分析对它们进行了结构表征。     

渣油催化临氢热转化钼铁双金属催化剂的研究

Replacement of precious single metal catalysts with cost-effective, highly-dispersed composite catalysts for catalytic hydrothermal conversion of residue holds tremendous promise for the residue upgrading technologies. Organic metals were added to the feed as the oil-soluble precursors, and transformed into the catalytic active phases in this work. Physical properties and structures of the composite catalysts had been investigated by X-ray fluorescence spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscope and transmission electron microscopy. The composite catalysts were found to be highly efficient in the catalytic hydrothermal conversion of both model compound and residue. Increased metal dispersion and synergistic effects of two metals played indispensable roles in such catalytic system. Results showed that under the test conditions in the article, the catalyst had the best catalytic performance when the mass ratio of molybdenum to iron was 1.5.     

绝缘栅双极晶体管表面电沉积镍基石墨烯薄膜的制备及其散热性能研究

将镍基石墨烯薄膜应用在IGBT模块散热方面,提出了镍基石墨烯薄膜的制备工艺,并利用扫描电镜、透射电镜、能谱仪等对镍基石墨烯薄膜进行表征。结果表明,当电流密度为2 A/dm~2时,镍基石墨烯薄膜中的有大量的Ni和C元素,镍基石墨烯薄膜中的石墨烯平均粒径为32.5 nm。当脉冲电流密度为1 A/dm~2时,镍基石墨烯薄转移镍基石墨烯薄膜后的S1芯片的散热效果较好。当脉冲电流密度为2 A/dm~2时,镍基石墨烯薄转移镍基石墨烯薄膜后的S2芯片的散热效果最好,其最大散热量为14.9℃。     

基于门控联合池化自编码器的通用性文本表征

为了学习文本的语义表征,以往的研究者主要依赖于复杂的循环神经网络(recurrent neural networks, RNNs)和监督式学习方法。该文提出了一种门控联合池化自编码器(gated mean-max AAE)用于学习中英文的文本语义表征。该文的自编码器完全通过多头自注意力机制(multi-head self-attention mechanism)来构建编码器和解码器网络。在编码阶段,提出了均值—最大化(mean-max)联合表征策略,即同时运用平均池化(mean pooling)和最大池化(max pooling)操作来捕获输入文本中多样性的语义信息。为促使联合池化表征可以全面地指导重构过程,解码器采用门控操作进行动态关注。通过在大规模中英文未标注语料上训练模型,获得了高质量的句子编码器。在重构文本段落的实验中,该文模型在实验效果和计算效率上均超越了传统的RNNs模型。将公开训练好的文本编码器,使其可以方便地运用于后续的研究。     

Synthesis and Characterization of Pr0.6-xNdxCa0.4FeO3-δ with Pechini Method

Pr0.6-x NdxCa0.4 FeO3-δ （ x = 0.0, 0.2, 0.3, 0.4, 0.5, 0.6） were synthesized using Pechini method. A number of studies were conducted concerning composition, specific area, crystalline structure and microstructure of the samples by means of FT-IR, BET, XRD TG-DTA and SEM. The results show that all the samples with different doping amounts of Pr^3＋ and Nd^3＋ on A-site are fine dispersed, and mean particle size less than 100 nm. The powders have good sinterability, and the relative density is 95% after sintered at 1200 ℃ for 2 h. It is found that all specimens are entirely single phase solid solutions with orthorhombic perovskite structure, the stable perovskitetype phase is formed completely after calcination at 900 ℃.