Experimental study of crystal anisotropy based on ultra-precision cylindrical turning of single-crystal calcium fluoride

To realize ultimately efficient signal processing, it is necessary to replace electrical signal processing circuits with optical ones. The optical micro-resonator, which localizes light at a certain spot, is an essential component in optical signal processing. Single-crystal calcium fluoride (CaF₂) is the most suitable material for a highly efficient optical micro-resonator. The CaF₂ resonator can only be manufactured by ultra-precision machining processes, because its crystal anisotropy does not allow the application of chemical etching. However, the optical micro-resonator's performance depends definitely on the surface integrity.This study investigated the relationship between surface quality after ultra-precision machining and crystal anisotropy. Firstly, crack initiation was investigated on the (1 0 0), (1 1 0), and (1 1 1) planes using the micro-Vickers hardness test. Secondly, brittle-ductile transition was investigated by orthogonal cutting tests. Finally, cutting performance of cylindrical turning was evaluated, which could be a suitable method for manufacturing the CaF₂ resonator. The most difficult point in cylindrical turning of CaF₂ is that the crystalline plane and cutting direction vary continuously. In order to manufacture the CaF₂ optical micro-resonator more efficiently, analysis was conducted on crack initiation and surface quality of all crystallographic orientations from the perspective of slip system and cleavage.     

Solvent fractionation of hard palm stearin to increase the concentration of tripalmitoylglycerol and dipalmitoyl-stearoyl-glycerol as substrates for synthesis of human milk fat substitute

This research aimed to produce triacylglycerols fraction rich in palmitic acid (PA) at the sn-2 position from hard palm stearin (HPS) through acetone fractionation. Fractionations were done at HPS-to-acetone ratios of 1:3, 1:5 and 1:7 (w/v) and at temperatures of 25, 30 and 35 °C for 3 h. Triacylglycerols with PA at the sn-2 position, such as tripalmitoylglycerol (PPP) and dipalmitoyl-stearoyl-glycerol (PPS), were concentrated in the solid fraction, obtained after separation by filtration. The optimal fractionation conditions were at a HPS-to-acetone ratio of 1:5 (w/v) and 30 °C. The total PPP and PPS content was more than 91%, with a corresponding yield of more than 59%. Triacylglycerols obtained were composed of more than 91% PA in which 88% were at the sn-2 position. Conclusively, the solvent fractionation is a suited alternative method for the preparation of triacylglycerols used for the enzymatic synthesis of 1,3-dioleoyl-2-palmitoylglycerol which is the main triacylglycerol for human milk fat substitute.     

多晶硅锭中硬质点分析及控制研究

以多晶硅锭中硬质点为研究对象,通过实验研究和数值模拟的方法,对多晶硅锭中硬质点进行形貌和成分分析,并提出改善控制方法。研究结果表明硅锭中部的硬质点较细小,主要由SiC组成;硅锭头部的硬质点较粗大,主要由SiC和Si3N4组成,还有少量O的存在。进一步研究发现多晶硅定向凝固铸锭炉的热场结构对于多晶硅锭硬质点形成有直接影响,通过改进热场结构,优化晶体生长界面,显著减少了铸锭中硬质点的数量。     

油基钻井液的封堵性能研究与应用

在涠洲12-1北油田一期工程中使用油基钻井液后事故率明显降低,但仍未能彻底解决涠二段硬脆性泥页岩井壁稳定性问题。对进一步加强油基钻井液的封堵能力进行了室内研究。通过在油基钻井液中引入超微细颗粒材料、纤维材料、变形材料和粘弹性材料,可大幅度提高其封堵能力。在涠洲12-1北油田二期工程中应用了加强封堵能力的油基钻井液,结果钻井施工非常顺利,几乎无井下复杂事故。室内评价及二期工程实践结果表明,增强油基钻井液的封堵能力对保持硬脆性泥页岩井壁稳定至关重要。     

强捻棉纱针织产品的性能研究

通过对强捻棉纱针织产品进行服用性能测试，得出强捻纱织物具有良好的服用性能。     

Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

提高深井硬地层钻井速度技术难点及对策

乌龙1井地层为南方海相沉积,地层古老、岩石硬度大、研磨性强、可钻性差、地层倾角大(最大为80°)井斜难以控制、蹩跳钻严重,制约了该地区深井钻井速度。文章介绍了解决提高钻井速度这一瓶颈问题,从深井优快钻井及其配套技术、硬地层钻进的钻头优选、优化钻井参数、引用新技术、新工艺、新工具等方面进行了探索,钻井速度有了大幅度地提高,对类似井具有一定的借鉴作用。     

一个计算机动画转头模型

本文提出一个用于计算机动画的转头模型。它利用头部的正面和侧面形象来构造出头的三维结构形象，然后按指定的旋转轴旋转该结构，经过边缘轮廓提取及隐线消除，最终得到正确的转头过程序列画面。     

面向21世纪课程教材对地方综合大学电工学教学改革的影响--广西大学使用面向21世纪电工学课程系列教材的实践与探索

阐述了我校使用“面向21世纪”电工学课程系列教材的实践与探索过程，以及对我校电工学教学所产生的转折性影响和积极的导向作用，最后对教材提出了几点建议。