爆炸排淤填石法中淤泥的本构模型

以爆炸排淤填石法为背景 ,对不同应变率阶段淤泥的本构模型进行了分析 ,利用ANSYS/LS-DYNA动态有限元分析程序对所选择的模型进行验证和确认。计算和分析结果表明 :在形成爆炸空腔的高应变率阶段 ,淤泥表现为理想不可压缩流体的性质 ;在小药量小抵抗线条件下 ,甚至在淤泥自重作用下的较低应变率变形阶段 ,其黏性效应也可以忽略不计。     

基于张量分解融合RGB-D图像的物体识别

为了充分利用RGB-D图像的深度图像信息，提出了基于张量分解的物体识别方法。首先将RGB-D图像构造成一个四阶张量，然后将该四阶张量分解为一个核心张量和四个因子矩阵，再利用相应的因子矩阵将原张量进行投影，获得融合后的RGB-D数据，最后输入到卷积神经网络中进行识别。RGB-D数据集中三组相似物体的识别结果表明，利用张量分解融合RGB-D图像的物体识别准确率高于未采用张量分解的物体识别准确率，并且单一错分实例的准确率最高可提升99%。     

板式塔中无伸缩型受液槽的改进

对板式塔中的受液槽进行了改进，将无伸缩型改性伸缩型，避免了漏液，提高了常压塔的分离效果。     

Computing surfaces invariant under subdivision

In this paper, we propose a general subdivision algorithm for generating surfaces. The algorithm has as motivation our earlier work on the design of free form curves where similar ideas were investigated. Here we describe some properties of uniform refinement algorithms for surface generation. A detail analysis of their properties will be given later by one of us.     

Micromechanical approach to damage mechanics of composite materials with fabric tensors

The purpose of this study is to apply continuum damage mechanics – introduced through the concept of fabric tensors – to composite materials within the framework of the theory of elasticity. A directional data model of damage mechanics for composite materials will be developed using fabric tensors. The introduction of fabric tensors into the analysis of damage of composite materials will allow for an enhanced and better understood physical meaning of damage. The micromechanical approach will be used here to relate the damage effect through fabric tensors to the behavior of composite materials. In this approach, damage mechanics is introduced separately to the constituents of the composite material through different constituents’ damage effect tensors. The damaged properties of the composite system as a whole can then be obtained by proper homogenization of the damaged properties of the constituents.

The derivation of a generalized formulation of damage evolution will be shown here in a mathematically consistent manner that is based on sound thermodynamic principles. Numerical examples will be presented to show applicability. In addition, damage evolution for the one-dimensional tension case is also illustrated.     

角状螺旋固体激光器热畸变自补偿特性分析

利用张量方法对角状螺旋光路固体激光器作了分析，证实其在ｘ、ｙ两方向对激光介质的热畸变有自补偿作用，且ｘ、ｙ两方向呈对称性．     

各向加权异性有限元法在不可压粘性流动计算中的应用

本文利用各向异性张力有限单元，考虑到其独特的性质，提出了一种各向加权异性的算法，即在不同方向采用不同连续性的插值函数，然后再在原连续性较弱的方向以连续性较强的插值函数计算，最后把两次计算的结果加权处理。这种方法可以适应两个方向连续性要求不同或相同的各种情况，即克服了一般各向异性张力有限单元的局限性，又大大减少了存贮量和计算量。     

Diffusion tensor interpolation profile control using non-uniform motion on a Riemannian geodesic

Tensor interpolation is a key step in the processing algorithms of diffusion tensor imaging (DTI), such as registration and tractography. The diffusion tensor (DT) in biological tissues is assumed to be positive definite. However, the tensor interpolations in most clinical applications have used a Euclidian scheme that does not take this assumption into account. Several Rie-mannian schemes were developed to overcome this limitation. Although each of the Riemannian schemes uses different metrics, they all result in a ‘fixed’ interpolation profile that cannot adapt to a variety of diffusion patterns in biological tissues. In this paper, we propose a DT interpolation scheme to control the interpolation profile, and explore its feasibility in clinical applications. The profile controllability comes from the non-uniform motion of interpolation on the Riemannian geodesic. The interpolation experiment with medical DTI data shows that the profile control improves the interpolation quality by assessing the reconstruction errors with the determinant error, Euclidean norm, and Riemannian norm.     

一种面向弱纹理图像的特征点描述子

现有的大多数特征点提取算法适用于处理纹理丰富的图像,而对于弱纹理图像则无法提取有效的特征点. 对此,提出了多邻域结构张量特征(MNSTF)算法. 基于一系列固定的邻域和图像结构张量,通过表达局部图像的结构和纹理信息,解决了弱纹理和无纹理场景下特征点提取和匹配等相关问题;同时,通过计算邻域之间的相对方向,实现了MNSTF算法特征描述子的旋转不变性. 实验结果表明,MNSTF算法在经过旋转的弱纹理图像测试集上的特征点匹配准确率达到了99.9%以上,验证了其良好的适用性、旋转不变性和鲁棒性.     

基于Steger算法的弯管图像中心线检测方法

在基于多视几何的弯管三维测量方法中,为了重构弯管三维模型,需要精确稳定的提取弯管图像中心线,文章研究了常用的弯管图像中心线检测方法的不足,结合张量投票算法与Steger算法,提出一种亚像素级的弯管图像中心线检测算法。通过实验验证该算法能够克服光照不均匀带来的影响,提取弯管中心线的精度在0.5像素以内。