缠绕管件轴压下径向形变和破坏模式的有限元分析与验证

本文采用缠绕工艺制备厚壁碳/环氧复合材料主承力管件,对所制备管件试样进行轴压破坏试验,并采用有限元分析软件ANSYS7.0对试验过程进行模拟分析.分析结果表明轴压管件径向形变最大的位置在距离管件端面20～25mm处,表明该位置容易发生破坏,与实验结果是一致的.     

关于化工工艺学教学改革的探讨

本文从强化课堂教学、加强实践与理论教学相结合以及强化学生工程观念等方面对《化工工艺学》课程教学方法的改革进行了探讨,提高了教学质量和教学效果,为更好地培养具有较强综合能力的化工工艺专业合格人才提供了重要保证。     

硬盘用基板微晶玻璃的研究与应用

介绍了适用于高容量、小型化硬盘用基板的各种微晶玻璃材料，简要讨论了各种微晶玻璃的化学组成、显微结构、主晶相种类以及各种微晶玻璃的特性，并对今后的发展趋势进行了展望。     

光温条件对新疆雪莲愈伤组织反应器培养后再分化能力的影响

研究了光质、光周期、昼夜温差和低温处理时间对反应器大规模培养后的新疆雪莲愈伤组织再分化能力的影响. 实验结果表明，长波长光更有利于愈伤组织的再分化. 光照时间显著影响愈伤组织的再分化能力，光照时间为16 h/d时愈伤组织的分化频率和平均出芽数达到最大，分别为76.7%和1.8个/块. 昼夜温差与愈伤组织的再分化能力呈显著负相关. 与水母雪莲不同，低温处理并不利于新疆雪莲愈伤组织的再分化. 新疆雪莲愈伤组织的再分化能力与同工酶的种类和活性密切相关.     

4-(2-噻吩基)苯乙酸及其衍生物的合成

采用新方法设计并合成了4-(2-噻吩基)苯乙酸及其衍生物。通过对各步反应的研究,找到了最佳的反应条件和4-(2-噻吩基)苯乙酸及其衍生物的分离和纯化方法。并对这些化合物的结构用元素分析I、R1、H NMR进行了确证。并对其潜在的应用价值进行了探讨。     

海外瞭望

Naturex收购HP植物制剂公司Naturex公司(Avignon,法国)宣布收购意大利HP植物制剂公司(米兰)。Naturex是一家植物萃取物供应商,最近曾收购了位于米兰的HammerPharma公司。HP植物制剂公司主要致力于营养保健品行业中所用到的植物萃取物的配方设计及销售。对于这一收购行动,Naturex公司总裁兼首席执行官Jacques Dikansky说:“两家公司的联合将使我们同目前已有的意大利客户之间的联系更为紧密,并有助于我们扩大这一市场,使其在整个欧洲市场具有战略意义。”芬美意收购丹尼斯克食用香精业务芬美意公司(日内瓦)已同意以33.6亿丹麦克朗的价…     

Preparation and characterization of multi-walled carbon nanotubes supported PtRu catalysts for proton exchange membrane fuel cells

A series of PtRu nanocomposites supported on H₂O₂-oxidized multi-walled carbon nanotubes (MWCNTs) were synthesized via two chemical reduction methods—one used aqueous formaldehyde (HCHO method) and the other used ethylene glycol (EG method) as the reducing agents. The effects of the solvents (water and ethylene glycol) and the surface composition of the MWCNTs on the deposition and the dispersion of the metal particles were investigated using N₂ adsorption, TEM, ICP-AES, FTIR and TPD. The wetting heats of the MWCNTs in corresponding solvents were also measured. The characterizations suggest that combination of the surface chemistry of the MWCNTs with the solvents decides the deposition and the dispersion of the metal nanoparticles. These nanocomposites were evaluated as proton exchange membrane fuel cell anode catalysts for oxidation of 50 ppm CO contaminated hydrogen and compared with a commercial PtRu/C catalyst. The data reveal superior performances for the nanocomposites prepared by the EG method to those by the HCHO method and even to that for the commercial analogue. Structure–performance relationship of the nanocomposites was also studied.     

煤与垃圾衍生燃料的流化床混烧试验研究

使用鼓泡流化床燃烧炉进行了煤与垃圾衍生燃料(RDF)的混烧实验研究,分析了燃烧尾气中O2、CO、CO2、H2O、NOx、CH4、SO2、HCl、HCN浓度的变化,并对各成分之间的浓度进行了相关性分析。研究结果表明在750~900℃的范围内,高温利于SO2的脱除;NO的浓度随床温的提高而增加,NO2的浓度与床温的关系不大;HCl的浓度随床温的升高而增加,说明高温不利于HCl的脱除;在空气量较低的情况下,CO、CH4、N2O、HCN等气体的浓度较高,相关分析表明,这些气体浓度之间有较强的正相关关系,说明这些气体适宜于还原气氛下生成;随着HCl气体浓度的增加,SO2浓度降低,说明HCl的存在可促进石灰石脱除SO2的反应,同时还证实煤与RDF混烧可使尾气中的SO2和HCl气体浓度均有所下降。     

Classification of defects in steel strip surface based on multiclass support vector machine

In this paper, we use support vector machine to classify the defects in steel strip surface images. After image binarization, three types of image features, including geometric feature, grayscale feature and shape feature, are extracted by combining the defect target image and its corresponding binary image. For the classification model based on support vector machine, we utilize Gauss radial basis as the kernel function, determine model parameters by cross-validation and employ one-versus-one method for multiclass classifier. Experiment results show that support vector machine model outperforms the traditional classification model based on back-propagation neural network in average classification accuracy.     

Physically-based modeling,simulation and rendering of fire for computer animation

We give an up-to-date survey on techniques and methods for fire simulation in computer graphics. Physically-based method prevails over traditional non-physical methods for realistic visual effect. In this paper, we explore visual simulation of fire-related phenomena in terms of physically modeling, numerical simulation and visual rendering. Firstly, we introduce a physical and chemical coupled mathematical model to explain fire behavior and motion. Several assumptions and constrains are put forward to simplify their implementations in computer graphics. We then give an overview of present methods to solve the most complicated processes in numerical simulation: velocity advection and pressure projection. In addition, comparisons of these methods are also presented respectively. Since fire is a participating medium as well as a visual radiator, we discuss techniques and problems of these issues as well. We conclude by addressing several open challenges and possible future research directions in fire simulation.