ELECTRON MICROANALYSIS FOR LASER MELTED ZONE IN 45 STEEL WITH Fe-Ni-Cr COATING

The Fe-Ni-Cr coating laver has been alloyed with 45 steel base metal by transverse.flow typeCO_2 gas laser of maximum output 5kW.The characteristics of the melted zone and the es-sence of the“bright band”has been investigated using the electron microscopy.The resultsshow that the“bright band”belongs to the melted zone and is a vertical section of the planecrystal,The width of the“bright band”equals the height of the plane crystal,which decreaseswith the increase of laser beam scanning rate and the decrease of laser power.This has beenexplained in terms of constitutional supercooling G/R.     

A PROCESS OF PREPARING REPLICAS FOR THE SUBSTITUTION OF METAL SPECIMENS IN METALLOGRAPHIC STUDY

本文讨论如何应用“滴液盖片法”制造胶质代替膜来代替不透明的金属样品使能直接利用生物显微镜观察金属内结构,同时亦可利用金相显微镜观察而得到同一结果。     

地下环境中电子设备的腐蚀与防护

程环境中电子设备所承受的湿度、温度、腐蚀性气体、空气沉积物、微生物等环境应力因素及其腐蚀效应，概述总结了电子设备腐蚀机制及主要类型，并提出电子设备设计与使用中抑制腐蚀的措施.     

汽车装焊设备现状及发展趋向

本文在分析了国外汽车装焊技术发展过程和当今水平、国内汽车装焊设备现状后,论述了成焊公司开发生产汽车装焊设备的有利条件。针对我国汽车工业2000年发展目标,介绍了我国汽车装焊设备发展动向,具体地论述了成焊公司在近几年中开发汽车车身装焊生产线及其设备,自动多点焊机,焊接机器人,各种汽车专用焊接设备以及通用焊机的设想。     

铝合金时效-屈服强度的实验与模型化研究

以析出热力学、长大动力学及位错理论为基础，研究了铝合金在时效过程中盘／片状、棒／针状析出相尺寸、体积分数对时效合金强化效果的影响，从微观-宏观相结合的角度建立了具有盘／片状、棒／针状细小时效强化相铝合金的时效工艺-屈服强度量化模型，并通过513K温度下时效Al-Cu-Mg合金和463K温度下时效Al-Mg-Si合金的实验结果对模型进行了验证，取得了较满意的吻合结果，并对本模型的模拟精度与时效析出相参数之间的关系进行了讨论。     

Cu-Fe-Cr原位复合材料中的纤维相

通过感应熔炼、铸造、锻造和冷拔变形制备了Cu-16Fe-2Cr(质量分数,％)原位复合材料,最终线材(其轧制后的冷拔变形量达到η=ln(A_0/A)=5.42,A_0和A分别为冷拔起始和冷拔后线材的横截面面积)的抗拉强度为980 MPa。将Cu基体选择腐蚀后提取出纤维,采用SEM和TEM观察分析纤维相组织形态。在较低的应变量时,一些Fe—Cr纤维保持着与铸态树枝晶相同的bcc单晶结构,选区电子衍射表明纤维已经形成了〈110〉织构。在较高的应变量时,单根Fe-Cr纤维分为一些由晶界隔开的平行亚单元(宽度约为100 nm),通过亚单元共同的[110]衍射获得了晶粒之间的相对取向关系,相邻晶粒的偏差角在11°—82°之间。根据Hall-Petch关系讨论了原位复合材料的强度问题。     

A NEW ELECTROMAGNETIC IMAGING SCHEME

ＡＮＥＷＥＬＥＣＴＲＯＭＡＧＮＥＴＩＣＩＭＡＧＩＮＧＳＣＨＥＭＥ①ＺｈａｎｇＲｏｎｇｆｅｎｇ，ＨｅＪｉｓｈａｎＣｏｌｅｇｅｏｆＲｅｓｏｕｒｃｅ，ＥｎｖｉｒｏｎｍｅｎｔａｎｄＣｉｖｉｌＥｎｇｉｎｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏ...     

A machine vision approach to seam tracking in real-time in PAW of large-diameter stainless steel tube

Manual monitoring and seam tracking through watching weld pool images in real-time, by naked eyes or by industrial TV, are experience-depended, subjective, labor intensive, and sometimes biased. So it is necessary to realize the automation of computer-aided seam tracking. A PAW (plasma arc welding) seam tracking system was developed, which senses the molten pool and the seam in one frame by a vision sensor, and then detects the seam deviation to adjust the work piece motion adaptively to the seam position sensed by vision sensor. A novel molten pool area image-processing algorithm based on machine vision was proposed. The algorithm processes each image at the speed of 20 frames/second in real-time to extract three feature variables to get the seam deviation. It is proved experimentally that the algorithm is very fast and effective. Issues related to the algorithm are also discussed.     

Simulation on function mechanism of T1(Al_2CuLi) precipitate in localized corrosion of Al-Cu-Li alloys

1Introduction Al-Li alloys,compared with traditional Al alloys,possess more excellent properties,such as lower density,greater elastic modulus and higher specific strength.In the near future,they would be widely applied in airplane structures.However,they…     

固溶处理对电解制备的A356合金硅颗粒的影响

以电解低钛铝基合金为原料制备了A356合金,研究了在535℃下固溶处理时间对合金共晶硅相细化、球化和分布的影响.测量了硅颗粒的长径和短径,计算了颗粒的直径和长短径比值等参数,分析了上述参数随固溶时间的变化及其概率密度分布.实验结果表明:由该电解合金制备的A356合金经2～4 h的固溶处理,共晶硅就可得到较好的细化和球化效果,具有较高的分布集中度;A356合金的固溶处理时间可有效缩短.