The Yield Stress of Gas/Liquid/Fibre Suspensions

Yield stress measurements of gas/liquid/fibre suspensions, were conducted to examine the effect of gas concentration as well as fibre concentration. Obtaining a well mixed stable pulp suspension with gas was difficult. A transparent model system consisting of glass fibres submersed in refractive index matched liquid gave stable suspensions and had the additional advantage of allowing visual observations. The measurements were performed in a baffled shear tester and concentrations were in the range of 0–12.5% vol. gas and 8–14% wt. fibres. Results show that yield stress decreases with increasing gas fraction for constant fibre concentrations. Since the fibre concentration is defined in the liquid phase, the amount of fibres decreases with increasing gas concentration. This fact alone partly explains the decrease in yield stress, but the gas also has a direct impact on the decrease in yield stress. Further, as expected, the yield stress increases with increasing fibre concentrations when the gas fraction is kept constant.     

LDA Measurements on a Turbulent Gas/Liquid/Fibre Suspension

Detailed continuous phase flow measurements (mean and RMS velocities) by Laser Doppler Anemometry (LDA) of a turbulent gas/fibre/liquid suspension in a rotary shear tester have been performed with simultaneous torque measurements. The model system comprises a refractive‐index matched suspension in the 4‐12% wt. range with gas contents up to 15% vol. The two transition points, found by Andersson and Rasmuson (2000), were detected also with gas present and appear at higher impeller speeds with increasing gas and fibre concentrations. Plotting RMS and mean velocities versus impeller speed and power input, it is found that both decrease with increasing gas and fibre contents.     

An architecture modeling framework for probabilistic prediction

In the design phase of business and IT system development, it is desirable to predict the properties of the system-to-be. A number of formalisms to assess qualities such as performance, reliability and security have therefore previously been proposed. However, existing prediction systems do not allow the modeler to express uncertainty with respect to the design of the considered system. Yet, in contemporary business, the high rate of change in the environment leads to uncertainties about present and future characteristics of the system, so significant that ignoring them becomes problematic. In this paper, we propose a formalism, the Predictive, Probabilistic Architecture Modeling Framework (P²AMF), capable of advanced and probabilistically sound reasoning about business and IT architecture models, given in the form of Unified Modeling Language class and object diagrams. The proposed formalism is based on the Object Constraint Language (OCL). To OCL, P²AMF adds a probabilistic inference mechanism. The paper introduces P²AMF, describes its use for system property prediction and assessment and proposes an algorithm for probabilistic inference.     

伊朗轻质原油减渣馏分油水界面张力的研究

The vacuum residual from Iranian Light crude oil are separated into a series of 16 narrow fractions according to the molecular weight by the supercritical fluid extraction and fractional (SFEF) technology. The chemical element and the UV spectrum of each fraction are analyzed. The effects of several factors on the interfacial tension are investigated, which are the fraction concentration in oil phase, the ratio of oil component, the salts dissolved in the water phase and the pH value. The interfacial tension decreases rapidly as the concentration of the residual fraction in the oil increases, showing a higher interfacial activity of the fraction. The interfacial tension changes, as the amount of absorption or the state of the fractions in the interface changes resulting from different ratios of oil, different kinds or concentrations of salts in water, and different pH values. It is concluded that the intrfacial tension changes regularly, corresponding to the regular molecular parameters of the vacuum residual fractions.     

Near Wall Studies of Pulp Suspension Flow Using LDA

A detailed study of the flow behaviour in the near wall region of pulp suspensions up to 4.7% have been performed using Laser Doppler Anemometry (LDA) in pipe flow. Axial mean velocity profiles show a distinct plug flow and an increase of the plug region as the flow rate decreases and fibre concentration increases. An attempt is made to relate the LDA data‐rate to fibre concentration, which indicates a dilution region at 1‐2 mm from the wall that is larger than the annulus region. The dilution region increases with increasing flow rate, decreasing concentration and when using longer pulp fibres.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Furfural Oxidation with Hydrogen Peroxide Over ZSM-5 Based Micro-Mesoporous Aluminosilicates

Micro-mesoporous aluminosilicates based on ZSM-5 zeolite, obtained by a dual template method, as well as in the presence of a dual-functional template (i.e. a Gemini-type surfactant), were tested in the oxidation of furfural with hydrogen peroxide. Even substantial changes in acidity and porosity of the catalysts result in minor variations of selectivity towards the desired products. Application of the synthesized zeolite-based materials in the oxidation of furfural with hydrogen peroxide leads to formation of 2(5H)-furanone (yield up to 28.5%) and succinic acid (up to 19.5%) as the main C4 reaction products. The kinetic model developed previously to treat the results for oxidation of furfural over sulfated zirconia was able to describe the data also for micro-mesoporous aluminosilicates.

Graphical Abstract

     

变速永磁同步发电机系统稳压控制（连载之五）直接电压控制在发电机系统中的应用

在所研究的具有强弱磁能力变速永磁同步发电机的270V直流电能系统中,应用PWM整流器,提出直接电压控制技术,设计了直流母线电压PI控制器,并结合有源阻尼技术,在Matlab/Simulink仿真及测试平台中加以实现。最后,对本系列连载所研究的各类控制算法的性能进行对比研究。