Neutron detection by measuring capture gammas in a calorimetric approach

The neutron capture detector (NCD) is introduced as a novel detection scheme for thermal and epithermal neutrons that could provide large-area neutron counters by using common detector materials and proven technologies. The NCD is based on the fact that neutron captures are usually followed by prompt gamma cascades, where the sum energy of the gammas equals to the total excitation energy of typically 6-9 MeV. This large sum energy is measured in a calorimetric approach and taken as the signature of a neutron capture event. An NCD consists of a neutron converter, comprising of constituents with large elemental neutron capture cross-section like cadmium or gadolinium, which is embedded in common scintillator material. The scintillator must be large and dense enough to absorb with reasonable probability a portion of the sum energy that exceeds the energy of gammas emitted by common (natural, medical, industrial) radiation sources. An energy window, advantageously complemented with a multiplicity filter, then discriminates neutron capture signals against background. The paper presents experimental results obtained at the cold-neutron beam of the BER II research reactor, Helmholtz-Zentrum Berlin, and at other neutron sources with a prototype NCD, consisting of four BGO crystals with embedded cadmium sheets, and with a benchmark configuration consisting of two separate NaI(Tl) detectors. The detector responses are in excellent agreement with predictions of a simulation model developed for optimizing NCD configurations. NCDs could be deployed as neutron detectors in radiation portal monitors (RPMs). Advanced modular scintillation detector systems could even combine neutron and gamma sensitivity with excellent background suppression at minimum overall expense.     

Molecular monitoring of the microbial dynamics occurring on historical limestone buildings during and after the in situ application of different bio-consolidation treatments

Microbially Induced Carbonate Precipitation is proposed as an environmentally friendly method to protect decayed ornamental stone and introduced in the field of preservation of Cultural Heritage. Recent conservation studies performed under laboratory conditions on non-sterile calcarenite stones have successfully reported on the application of a suitable nutritional solution, inoculated and non-inoculated with Myxococcus xanthus, as a bioconsolidation treatment. Furthermore, this procedure has been applied in situ, very recently, to selected historical buildings in Granada, Spain. For the first time, we evaluate the efficiency and risks of the in situ application of the above mentioned treatments onto two historical buildings in Granada. The evaluation consists of a detailed investigation of the micro-biota actively growing during the seven days of the treatments - short-term monitoring and of that remaining on the stones after six and twelve months of the application - long-term monitoring. A molecular strategy, including DNA extraction, PCR amplification of 16S rRNA sequences, construction of clone libraries and fingerprinting by DGGE (Denaturing Gradient Gel Electrophoresis) analysis followed by sequencing was used to gain insight into the microbial diversity present on the differentially treated stones. The monitoring of M. xanthus was performed by PCR using species-specific primers. Similar dynamics were triggered on both buildings by the application of the nutritional solution (inoculated or non-inoculated). 16S rDNA sequencing revealed the dominant occurrence of members belonging to the Firmicutes and Proteobacteria during the seven days of the treatment, whereas after one year the order Bacillales of the phylum Firmicutes was the predominantly detected microorganisms. M. xanthus could be detected only during the seven days of the treatment. The treatments seem to activate no dangerous microorganisms and furthermore, to select the remainder of a homogeneous group of carbonatogenic bacteria on the stones after a long period of time.     

A new system for computer-aided preoperative planning and intraoperative navigation during corrective jaw surgery.

A new system for computer-aided corrective surgery of the jaws has been developed and introduced clinically. It combines three-dimensional (3-D) surgical planning with conventional dental occlusion planning. The developed software allows simulating the surgical correction on virtual 3-D models of the facial skeleton generated from computed tomography (CT) scans. Surgery planning and simulation include dynamic cephalometry, semi-automatic mirroring, interactive cutting of bone and segment repositioning. By coupling the software with a tracking system and with the help of a special registration procedure, we are able to acquire dental occlusion plans from plaster model mounts. Upon completion of the surgical plan, the setup is used to manufacture positioning splints for intraoperative guidance. The system provides further intraoperative assistance with the help of a display showing jaw positions and 3-D positioning guides updated in real time during the surgical procedure. The proposed approach offers the advantages of 3-D visualization and tracking technology without sacrificing long-proven cast-based techniques for dental occlusion evaluation. The system has been applied on one patient. Throughout this procedure, we have experienced improved assessment of pathology, increased precision, and augmented control.     

Knowing Activity: Corporate Bridging of Knowledge and Value Creation

We argue that practical endeavours towards mobilising and recreating knowledge is an integral part of value increasing activities, and expose how this dependency can be utilised in ameliorating practice. This bridging of knowledge and value creation constitutes organisational activities as knowing. The paper exposes the efforts of Telenor, a large telecom firm, to create an enduring agenda for non‐financial issues in management. We expose the development process and initial use of their new Integrated Management Business Model. This involves identifying financial and non‐financial drivers of future performance within and across several business units, as well as negotiating on appropriate indicators of both status and change. The paper pays special attention to the iterative approach to development in order to highlight a shift from an attempt to enable knowledge in autonomous processes secluded from everyday activities, towards an understanding of knowledge and knowing as intrinsic to the value creating activities performed. By entering the issue of intangibles through the knowing activity perspective, it was evident that the purpose of the management system was not to determine the status of intangibles in the corporation, it was to improve it.     

Immobilization of arsenic in a tailings material by ferrous iron treatment

Weathering and internal dissolution processes in mining waste materials may mobilize elevated levels of arsenic (As), contaminating ground and surface waters. Treating the polluted waters with iron oxyhydroxides is an established remediation method. By contrast, little knowledge is available to stabilize As in source materials by treating it with Fe precipitates and, on this way, to prevent the generation of polluted waters. In the present work the efficiency of Fe(II) treatment on As immobilization in a tailings material (TM) was studied with regard to the Fe:As molar ratio, the influence of CaCO3 amendment, and the As desorption at continued intensive leaching of Fe-treated TM. Fe precipitates were created by aerobic treatment of TM with Fe(II)sulfate at several Fe:As molar ratios with or without adding CaCO3, followed by aging the Fe-treated TM. The As retention in the treated tailings was studied by 4-fold elution with water, and the As desorption kinetics was examined by suspension leaching in laboratory microcosms over 3 weeks. Fe(II) treatment of TM reduced the water-extractable total As to <10 microg/L as the Fe:As molar ratio increased from 0 to 8. The water-soluble As of Fe-treated tailings could be reduced to 10-30 microg/L also under conditions of intensive leaching. Stabilizing the pH with CaCO3 resulted in consistently higher As release. The As desorption data followed the first-order kinetics in the early time stages of the desorption whereas at longer times the parabolic diffusion model was valid.     

Pseudo-Starvation Driven Energy Expenditure Negatively Affects Ovarian Follicle Development

In the present investigation, we examined whether a change in whole body energy fluxes could affect ovarian follicular development, employing mice ectopically expressing uncoupling protein 1 in skeletal muscle (UCP1-TG). Female UCP1-TG and wild-type (WT) mice were dissected at the age of 12 weeks. Energy intake and expenditure, activity, body weight and length, and body composition were measured. Plasma insulin, glucose, leptin, plasma fibroblast growth factor 21 (FGF21) and plasma insulin-like growth factor 1 (IGF1) levels were analyzed and ovarian follicle and corpus luteum numbers were counted. IGF1 signaling was analyzed by immunohistochemical staining for the activation of insulin receptor substrate 1/2 (IRS1/2) and AKT. UCP1-TG female mice had increased energy expenditure, reduced body size, maintained adiposity, and decreased IGF1 concentrations compared to their WT littermates, while preantral and antral follicle numbers were reduced by 40% and 60%, respectively. Corpora lutea were absent in 40% of the ovaries of UCP1-TG mice. Phospho-IRS1, phospho-AKT -Ser473 and -Thr308 immunostaining was present in the granulosa cells of antral follicles in WT ovaries, but faint to absent in the antral follicles of UCP1-TG mice. In conclusion, the reduction in circulating IGF1 levels due to the ectopic expression of UCP1 is associated with reduced immunostaining of the IRS1-PI3/AKT pathway, which may negatively affect ovarian follicle development and ovulation.     

In vitro and in vivo Staining Characteristics of Small,Fluorescent, Aβ42‐Binding D‐Enantiomeric Peptides in Transgenic AD Mouse Models

Plaque visualisation : We identified three different D ‐enantiomeric peptides that bind to Alzheimer's amyloid β (Aβ1‐42). As there is currently no definitive pre‐mortem diagnosis for Alzheimer's disease, we investigated the peptides' suitability as molecular probes for in vivo imaging in transgenic mouse models.

     

Key to analyte migration and retention in electrochromatography

This work identifies electrical field-induced concentration polarization (CP) as a key physical mechanism influencing the retention behavior of charged analytes in electrochromatography with fixed beds of porous adsorbent particles. Due to an insufficient screening of intraparticle surface charge, under most general conditions the porous (permeable) particles become charge-selective. CP is caused by coupled mass and charge transport normal to the charge-selective external surface of the permeable particles, which leads to concentration gradients of ionic species in the adjoining interparticle electrolyte solution. Cation-exchange (cation-selective) particles were employed to investigate the influence of applied voltage on the retention factor of counterionic, i.e., positively charged, analytes. It is demonstrated by macroscopic retention data and microscopic studies resolving the CP phenomenon on a particle scale that the dependence of CP on electrical field and mobile-phase ionic strengths is directly reflected in concomitant changes of analyte retention. The CP zones that develop at the interface between interparticle and intraparticle pore space are recognized by charged, but not electroneutral analytes while entering or leaving the particles. The intensity of these convective-diffusion boundary layers (CP zones) depends on the applied field strength and charge selectivity of a particle. Thus, it is the charge-selective transport between the interparticle and intraparticle pore space in packed beds that prevails under typical experimental conditions in electrochromatography and that forms the physical basis for a general electrical field dependence of the retention factor of charged analytes.     

Polycyclic aromatic hydrocarbons (PAH) in various types of tea

For the analysis of the 16 PAH (EFSA-PAH), which are classified as priority for different food groups by the Scientific Committee on Food (SCF) and the Joint FAO/WHO Experts Committee on Food Additives (JECFA) in tea, a sensitive analytical Fast-GC/HRMS method was used. The sample preparation included accelerated solvent extraction (ASE) and the highly automated clean up steps, gel permeation chromatography and solid phase extraction. The analytical parameters, limit of detection (0.01–0.02 μg/kg) and limit of quantification (0.03–0.06 μg/kg), were determined. The repeatability (RSD, n = 3) of different PAH in fruit tea ranged from 0.1 to 11%. It was observed that the total contents of the 16 PAH in tea samples ranged from 14 to 2,662 μg/kg. The analysed tea samples showed an increasing presence of PAH in the following order: herbal and fruit tea (n = 7) < black tea (n = 11) < green tea (n = 11) < white tea (n = 3) < mate-tea (n = 8). The correlation coefficient (R) between BaP and the sum of the 16 EFSA-PAH was established considering the contamination amount in all the 40 tea samples analysed.     

Furan and Methylfurans in Foods: An Update on Occurrence,Mitigation, and Risk Assessment

The acceptance of many foods is related to traditional cooking practices, which create taste and texture and are important to digestibility, preservation, and the reduction of foodborne illnesses. A wide range of compounds are formed during the cooking of foods, a number of these have been shown to lead to adverse effects in classical toxicological models and are known as food processing contaminants (FPC). It is essential that the presence and effects of such compounds alone and in combination within the diet are understood such that proportionate risk management measures can be developed, while taking a holistic view across the whole value chain. Furan and alkylfurans (principally 2‐ and 3‐methylfuran) are highly volatile FPC, which are formed in a wide range of foods at low amounts. The focus of research to‐date has been on those foods, which have been identified to be most consequential in terms of being sources of exposure, namely jarred and canned foods for infants and young children (meals and drinks) and coffee (roast and ground, soluble). This report presents (i) new industry data on the occurrence of furan and methylfurans in selected food categories following previous coffee studies, (ii) the most salient parameters that impact furan formation, and (iii) aspects of importance for the risk assessment.