Nondestructive determination of fatty acid composition of husked sunflower (Helianthus annua L.) seeds by near-infrared spectroscopy

Determination of the fatty acid composition of sunflower (Helianthus annua L.) seeds by near-infrared (NIR) spectroscopy was examined. Sunflower seeds were husked (removed from their hulls by a husking machine or manually with a knife). NIR spectra of these seeds were scanned from 1100 to 2500 nm at 2-nm intervals in a whole-grain cell with a wideangle moving drawer for machine-husked seeds or in a single-grain cup for a manually husked single-grain seed. The extracted oils from machine-husked seeds also were scanned by sandwiching them between a pair of slide glasses to create a thin layer and by placing them on a syrup cup. For extracted oil, the absorption band around 1720 nm filled out to the shorter wavelength region in the NIR second-derivative spectra as the percentage of the linoleic acid moiety increased, because linoleic acid absorbs in this region. On the other hand, for husked seeds and for a single-grain seed, as the percentage of linoleic acid increased, the trough at 1724 nm where oleic and saturated acids absorb decreased in the second-derivative NIR spectra. Determination of the fatty acid composition of sunflower seeds could be carried out successfully according to the NIR spectral pattern for both extracted oil (r=−0.989) and kernel seed (r=−0.993). This is important, especially for a manually husked single-grain seed (r=−0.971), because it can still be germinated after such nondestructive analysis.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Robust tracking servo system considering force disturbance for the optical disk recording system

This paper proposes a new robust tracking servo system for the optical disk recording system with feedforward controller based on the prediction of the tracking error. In optical recording systems, the feedback servo system must suppress the influence of force disturbance and parameter variation. To overcome this problem, this paper designs the robust feedback control system by using coprime factorization and disturbance observer. The detecting signal of the optical disk recording system is only a tracking error. Hence, the feedforward controller of the proposed tracking control system is constructed based on both the "zero-phase-error tracking" control theory and the prediction of the tracking error. The experimental results point out that the proposed tracking servo system has a quick and precise tracking response and keeps the residual tracking error below its tolerance.     

Acceleration of the Rate of Silver Nanoparticle Formation Using Microbubbles in a Sonochemical Process

The effect of the addition of microbubbles on the formation of silver nanoparticles produced in an ultrasonic radiation-mediated process was investigated. The addition of microbubbles with an area-based median diameter of 26.0?µm and a bubble volume density of 0.18?cm³/L significantly increased the silver nanoparticle formation rate during the sonochemical process. The size distribution of the silver nanoparticles was largely unaffected by the addition of the microbubbles. The influence of changes in the microbubble volume density on the formation of the silver nanoparticles was also investigated; it was confirmed that the rate of formation of the silver nanoparticles increased moderately with increasing volume density. The gradient in absorption spectra was approximately 30 times larger for the case when microbubbles (median diameter: 28.3?µm) were added at 0.74?cm³/L, compared with the case without microbubbles. The results suggested that the microbubbles provided reaction sites similar to cavitation bubbles in the ultrasonic reaction.     

Electron Holography Studies on Narrow Magnetic Domain Walls Observed in a Heusler Alloy Ni50Mn25Al12.5Ga12.5

Peculiar magnetic domain walls produced in Heusler alloys, which have attracted renewed interest due to their potential application to actuators and spintronic devices, are studied here using electron holography. The observations reveal unexpectedly narrow magnetic domain walls, the width of which showed perfect agreement with that of the antiphase boundaries (APB, e.g., only 3 nm). While the results can be explained by the significant depression of ferromagnetism due to the local chemical disorder, the electron phase shift indicates that ferromagnetic correlation still remains in the APB region.     

Nambu-Goldstone-Leggett and Higgs Modes in Multi-Condensate Superconductors

Multi-condensate superconductors have multiple excitation modes. Among them, the Nambu-Goldstone mode, Leggett mode, and Higgs mode are important in superconductors. The dispersion relations and mass formulas of these modes in a multi-condensate superconductor are evaluated by using the functional integral method. At low temperatures, the Higgs mode is defined clearly with the action of a quadratic form. The Higgs mass in the BCS model has a non-relativistic correction compared to that of the relativistic Nambu-Jona-Lasinio model.     

工艺因素对钒锆蓝颜料呈色的影响

探讨了工艺因素对钒－硅酸锆蓝色颜料合成的影响，用XRD和UV－V光谱对样品进行了表征，得到一些有益的结论。     

A Method of Magnesium Treatment for Producing Gravity-diecast Ductile Iron

Equipment for the in-stream treatment of ductile iron has been adapted for gravity-diecasting. The treatment unit consists of a pouring basin, reaction chamber, and a reservoir for holding treated iron. The device is highly mobile in so much that it can be transferred from furnace to successive dies and back again, allowing consecutive pouring. The authors have studied the effect of reaction chamber design and nodularising-alloy type on the microstructure of cast specimens, using three types of chamber design and three types of nodulariser at different temperatures. The results indicate that a carbide-free structure with a high nodule count of up to 1500 n/mm² within the as-cast structure of a diecast rod specimen of 30 mm dia. can be achieved using this treatment equipment, when employing suitable nodularising alloy and process chamber design.     

First-principles investigation on the segregation of Pd at LaFe1-xPdxO3-y surfaces

First-principles calculations were performed to investigate the effect of Pd concentration and oxygen vacancies on the stability of Pd at LaFeO₃ surfaces. We found a much stronger tendency of Pd to segregate by taking the aggregation of Pd at LaFe_1-xPd_xO_3-y surfaces into consideration, resulting in a pair of Pd-Pd around a vacancy. Moreover, we predicted that one oxygen-vacancy-containing FeO₂-terminated surfaces would be stable at high temperatures by comparing the stability of LaFe_1-xPd_xO_3-y surfaces, which further supports our previous conclusion that a Pd-containing perovskite catalyst should be calcined at 1,073 K or higher temperatures in air to enhance the segregation of Pd in the vicinity of surfaces to rapidly transform the Pd catalyst from oxidized to reduced states on the perovskite support.