“聚龙一号”装置四层圆盘锥磁绝缘传输线的三维粒子模拟研究

介绍了"聚龙一号"中四层圆盘锥磁绝缘传输线(MITL)的基本理论。在CPIPIC平台上,采用非均匀网格和周期性对称边界条件,建立了"聚龙一号"的四层圆盘锥MITL的三维粒子模拟模型。设置相应的参数并用并行算法模拟得到了该器件中各层在绝缘堆上和MITL中间位置的电流和汇流后的电流,并与理论和实验数据进行相互对比验证。模拟结果表明整个器件在达到磁绝缘状态后具有很高的传输效率,并与实验结果相互验证,为以后进一步的研究提供了保证。     

Effect laws and mechanisms of different temperatures on isothermal tensile fracture morphologies of high-strength boron steel

The fracture behaviour and morphologies of high-strength boron steel were investigated at different temperatures at a constant strain rate of 0.1 s-1 based on isothermal tensile tests. Fracture mechanisms were also analyzed based on the relationship between microstructure transformation and continuous cooling transformation(CCT) curves. It is found that 1) fractures of the investigated steel at high temperatures are dimple fractures; 2) the deformation of high-strength boron steel at high temperatures accelerates diffusion transformations; thus, to obtain full martensite, a higher cooling rate is needed; and 3) the investigated steel has the best plasticity when the deformation temperature is 750 °C.     

A practical reliability assessment approach and its application for pile-stabilized slopes using FORM and support vector machine

Bulletin of Engineering Geology and the Environment - Many uncertainties exist in pile-stabilized slopes which make their design substantially complicated. In this paper, a first-order reliability...     

磷酸高效分解磷矿实验研究

为改进湿法磷酸生产工艺,提高副产石膏的品质,减少湿法磷酸固体副产物磷石膏堆存产生的经济和环保压力,进行了磷酸分解磷矿制磷酸的实验研究。采用贵州某磷矿为主要原料,研究了湿法磷酸预分解磷矿的反应条件。通过单因素实验确定了湿法磷酸分解磷矿最优反应条件：反应温度为75 ℃,磷酸与磷矿的质量比（液固比）为9,反应时间为3 h,磷酸质量分数为30%（以五氧化二磷计）。在此条件下,磷矿的分解率为98.62%。     

核电厂立式泵电机多故障耦合振动问题的处理

某核电厂立式水泵配套电机存在两径向方向振动差异大、启机后振动缓慢上升的振动现象，为解决该问题，本文利用频谱分析、固有频率分析、相位分析等方法进行故障诊断，判断出该配套电机存在结构共振、转子热弯曲、动不平衡的耦合问题，并最终通过调整螺栓及现场动平衡方法成功解决了振动问题。      

海工磨细矿渣混凝土的冻渗性与孔结构研究

在天然海水侵蚀和冻融循环作用下,与普通混凝土对比,对掺加磨细矿渣(GGBS)海工混凝土的抗冻性和抗氯离子渗透性的耦合性能(简称冻渗性)以及孔结构的细观性能进行了研究.用R值代表混凝土冻渗性指标进行分析讨论,结果表明:掺加磨细矿渣的混凝土,无论掺加引气剂与否,水胶比增大,R值逐渐减小;不掺引气剂,矿粉掺量增大,R值减小;掺加引气剂,矿粉掺量增大,R值增大;引气剂掺量增大,R值增大,但引气剂掺量超过一定极限,R值增长不明显;抗压强度等级在40～60 MPa范围内,其强度值与R值没有明显的规律性.MIP结果表明:掺加矿粉和引气剂的海工混凝土经过冻渗后,无害孔和少害孔的数量较多;R值与最可几孔径大小有明显的反比关系.