Characterisation and functional properties of proteins of some Indian chickpea (Cicer arietinum) cultivars

BACKGROUND: Chickpea (Cicer arietinum L.) proteins have received attention during recent years owing to their higher biological values and better functional ingredients than oilseed proteins. In this study the composition, fractionation, electrophoretic behaviour and functional properties of five chickpea protein concentrates were determined. RESULTS: The chickpea proteins contained 15.9–54.8 g kg^?1 albumin, 48.9–154.1 g kg^?1 globulin, 39.2–76.5 g kg^?1 glutelin and traces of prolamin. Electrophoresis of the various fractions revealed that albumin and globulin were made up of sub‐units of different molecular weights ranging from 7 to 96 kDa. Water and oil absorption of the protein concentrates varied from 1.15 to 2.75 g g^?1 and from 2.60 to 5.65 g g^?1 respectively. Foaming capacity and foam stability of the protein concentrates were good and improved with the addition of salt (10 g L^?1 NaCl) or sugar (100 g L^?1 sucrose) at both isoelectric and neutral pH. Emulsifying capacity and emulsion stability of the protein concentrates were good and excellent respectively. CONCLUSION: Protein concentrates prepared from chickpeas have potential use in food formulations owing to their good emulsifying/foaming and water/oil‐binding capacities. Copyright © 2008 Society of Chemical Industry     

The effect of mass transfer on reaction rates during immobilized β-galactosidase-catalyzed conversion of lactose in hollow fiber membrane

The mass transfer of substrates through a bio-catalytic membrane layer is a key issue in determining the performance of β-galactosidase-catalyzed conversion of lactose in a hollow fiber membrane reactor (HFMR) system. An investigation on the effect of solutes mass transfer through a bio-catalytic membrane layer was carried out using the coupled mass transfer-reaction model. Product formation was reduced at a trans-membrane pressure (TMP) of higher than 0.5?bar. Meanwhile, the concentration polarization modulus of solutes rapidly increased with higher TMP and this result suggests the formation of gel layer, which reduced bio-catalysis rate at higher applied TMP. The concentration profile of solutes or substrates on the bio-catalytic membrane surface, which determines the rate of reaction was reduced due to mass transfer limitation. This investigation highlights that the formation of substrate-β-gal complex in an immobilized system is influenced by the mass transfer behavior of its substrate.     

Investigation on material mixing during FSW of AA7475 to AISI304

AA7xxx and AISI304 stainless steel (SS) are employed in promising applications. Al alloy-to-SS dissimilar joining is difficult and challenging. Major challenge in the joining of these alloys is the difficulty in mixing of these materials which possess exotic and widely distant properties. AA7475-T761 is a high strength aluminum alloy which is used in key aircraft components. Maiden AA7475-T761 and AISI304 dissimilar joints were fabricated using friction stir welding. Welding was performed with tool having pin diameter of 4 mm and offset of 1.25 mm on Aluminum side. Tool rotational speed, traverse speed and shoulder diameter were varied in the range of 450–560 rpm, 50–63 mm/min, and 12–14 mm, respectively. Mechanical tests showed that joint formed with 14 mm diameter, 560 rpm and 50 mm/min gave the best joint efficiency of 71% of Al-alloy at 7.31% elongation. The materials mixing issues during processing were analyzed with SEM mircrostructure and fractography. Metallography also revealed that offset is critical to the success of joint as it controlled effective mixing of SS and Al in 15 and 85 vol.%, respectively. SS fragments from thermo-mechanically affected zone of SS were found to be partially sheared forming layer of thickness equal to tool traverse/revolution ratio.     

Silicon Mitigates Drought Stress in Wheat (Triticum aestivum L.) Through Improving Photosynthetic Pigments,Biochemical and Yield Characters

Silicon - Feeling prone to stress differs with plant production stage, water scarcity near commencement of grain filling phase has a significant reduced grain yield through fewer endosperm and sink...     

Preparation and characterization study on maleic acid cross-linked poly(vinyl alcohol)/chitin/nanocellulose composites

In the quest on improving composite formulations for environmental sustainability, maleic acid (MA) cross-linked poly(vinyl alcohol) (PVA)-α-chitin composites reinforced by oil palm empty fruit bunch fibers (OPEFB)-derived nanocellulose crystals (NCC) had been successfully prepared. Based on the Fourier transform infrared (FTIR) spectroscopic analysis, it was proven that molecular interactions of the cross-linker to the polymeric networks was through conjugated ester linkage. Differential scanning calorimetry (DSC) showed that the influence of MA was minimal toward crystallization in the PVA/chitin/NCC composite. Maximum tensile strength, elongation at break and Young's modulus of the respective PVA/chitin/NCC composites were achieved at different content of MA, dependent on the PVA/chitin mass ratio. Among all compositions, a maximum Young's modulus was achieved at 30 wt% MA loading in PVA/chitin-30/NCC, amounting to 2,413.81 ± 167.36 MPa. Moreover, the mechanical properties and selected physicochemical properties (swelling, gel content, and contact angle) of the PVA/chitin/NCC composites could be tailored by varying the chitin content (10–30 wt%) and MA content (10–50 wt% based on total mass of composite). In brief, this chemically cross-linked PVA-based biocomposites formulated with sustainable resources exhibited tunable physicochemical and mechanical properties.     

Multihop routing with static and distributed clustering in WSNs

Wireless Networks - Nowadays, Wireless Sensor Networks are one of the fundamental infrastructures for IoT technology. Although WSN has been researched for a decade, providing energy efficiency for...     

Solvent-Aided Crystallization for Biodiesel Purification

The application of solvent-aided crystallization (SAC) is based on the addition of a solvent, here 1-butanol, to crude biodiesel to catalyze the purification process by separating biodiesel from contaminants via crystallization process. Response surface methodology was applied to optimize the process parameters of SAC, represented by biodiesel purity. The purified biodiesel was analyzed by means of gas chromatography-mass spectrometry for the composition of the present fatty acid methyl ester (FAME). Under the predicted optimum process conditions within the experimental ranges for the highest biodiesel purity, the predicted biodiesel purity was 99.375 %.     

Review on Zinc Oxide Nanoparticles: Antibacterial Activity and Toxicity Mechanism

Nano-Micro Letters - Antibacterial activity of zinc oxide nanoparticles (ZnO-NPs) has received significant interest worldwide particularly by the implementation of nanotechnology to synthesize...