Phenolic profiling reveals the metabolite basis of flesh colour and fresh-cut browning in apple fruit

Flesh colour, which is affected by cultivars and browning, can largely impact consumer acceptance in fresh-cut apples. The study profiled phenolic metabolites from apple flesh of twenty-three cultivars by widely targeted metabolomics. Comparison among white- and yellow-fleshed cultivars showed fifteen phenolics, mainly quercetin 3-O-glucoside, hyperoside, hesperetin 5-O-glucoside and cymaroside, in white-fleshed apples were significantly higher than those in yellow-fleshed apples. It may indicate a metabolite basis of yellow and white flesh colour, and better potential nutrition in white-fleshed apples. In addition, ten phenolic metabolites including five cyanidin glycosides showed significant differences between the highest and the lowest browning groups, indicating them may be crucial in browning of fresh-cut apple. This work elucidates the differences of phenolic profiles among apple cultivars with different flesh colour and provides useful data to evaluate the suitability of apple for fresh-cut processing.     

红外辐射联合回火与冷激杀菌技术对胡萝卜粉品质的影响

首先研究不同红外辐射温度(100,110,120℃)及辐射时间(2.5,5,10 min)对胡萝卜粉微生物及品质的影响,然后根据栅栏效应原理研究红外辐射-回火、红外辐射-冷激联合杀菌对胡萝卜粉微生物、色调值、类胡萝卜素含量等品质的影响。结果表明:100℃、10 min的红外辐射处理使细菌和真菌分别降低了1.9 lg(CFU/g)和2.32 lg(CFU/g),110℃、5 min的红外辐射处使细菌和真菌分别降低了1.58 lg(CFU/g)和2.57 lg(CFU/g)。在上述两种处理条件下胡萝卜粉的水分活度从0.238分别降至0.123和0.147,胡萝卜粉中总类胡萝卜素含量从308.8μg/g降至227.8μg/g和238.8μg/g,色差值(ΔE)为9.11和7.89。与红外辐射单独作用相比,联合回火后的处理没有显著影响细菌数目,处理后保持在5.40~5.80 CFU/g,霉菌、酵母数却在处理过程中显著减少,然而减少量较低,总数仍不低于4.5 lg(CFU/g)。红外辐射-冷激联合处理相比红外辐射单独处理,100℃、10 min联合冷激7 d处理可将细菌数量降低0.25 lg(CFU/g),可将霉菌与酵母数量降低0.28 lg(CFU/g),110℃、5 min联合冷激7 d处可将细菌数量降低0.26 lg(CFU/g),可将霉菌、酵母数量降低0.40 lg(CFU/g),且这些处理下胡萝卜粉的色调值、水分活度、类胡萝卜素含量变化不显著。本试验结果表明,红外辐射-冷激处理具有协同效应,且处理过程中胡萝卜粉的色调值及总类胡萝卜素含量不受影响,这为低水分粉体食品红外辐射联合杀菌提供了参考。     

Microstructure and mechanical behavior of laser aided additive manufactured low carbon interstitial Fe49.5Mn30Co10Cr10C0.5 multicomponent alloy

Laser aided additive manufacturing(LAAM)was used to fabricate bulk Fe49.5Mn30Co10Cr10C0.5 interstitial multicomponent alloy using pre-alloyed powder.The room temperature yield strength(σy),ultimate tensile strength(σUTS)and elongation(εUST)were 645 MPa,917 MPa and 27.0％respectively.The as-built sample consisted of equiaxed and dendritic cellular structures formed by elemental segregation.These cellular structures together with oxide particle inclusions were deemed to strengthen the material.The other contributing components include dislocation strengthening,friction stress and grain bound-ary strengthening.The high εUTS was attributed to dislocation motion and activation of both twinning and transformation-induced plasticity(TWIP and TRIP).Tensile tests performed at-40℃and-130℃demonstrated superior tensile strength of 1041 MPa and 1267 MPa respectively.However,almost no twinning was observed in the fractured sample tested at-40℃and-130℃.Instead,higher fraction of strain-induced hexagonal close-packed(HCP)ε phase transformation of 21.2％were observed for fractured sample tested at-40℃,compared with 6.3％in fractured room temperature sample.     

Three distinct optical-switching states in phase-change materials containing impurities:From physical origin to material design

Ge2Sb2Tes is the most widely utilized chalcogenide phase-change material for non-volatile photonic applications,which undergoes amorphous-cubic and cubic-hexagonal phase transition under external excitations.However,the cubic-hexagonal optical contrast is negligible,only the amorphous-cubic phase transition of Ge2Sb2Te5 is available.This limits the optical switching states of traditional active dis-plays and absorbers to two.We find that increasing structural disorder difference of cubic-hexagonal can increase optical contrast close to the level of amorphous-cubic.Therefore,an amorphous-cubic-hexagonal phase transition with high optical contrast is realized.Using this phase transition,we have developed display and absorber with three distinct switching states,improving the switching perfor-mance by 50％.Through the combination of first-principle calculations and experiments,we reveal that the key to increasing structural disorder difference of amorphous,cubic and hexagonal phases is to intro-duce small interstitial impurities(like N)in Ge2Sb2Tes,rather than large substitutional impurities(like Ag)previously thought.This is explained by the formation energy and lattice distortion.Based on the impurity atomic radius,interstitial site radius and formation energy,C and B are also potential suit-able impurities.In addition,introducing interstitial impurities into phase-change materials with van der Waals gaps in stable phase such as GeSb4Te7,GeSb2Te4,Ge3Sb2Te6,Sb2Te3 will produce high optical con-trast amorphous-metastable-stable phase transition.This research not only reveals the important role of interstitial impurities in increasing the optical contrast between metastable-stable phases,but also proposes varieties of candidate matrices and impurities.This provides new phase-change materials and design methods for non-volatile optical devices with multi-switching states.     

Precise quantification of the antibacterial activity of chitosan by NB medium neutralizer

In the present research,nutrient broth(NB)medium was identified to be able to neutralize the antibac-terial activity of chitosan and its derivatives.Therefore,an improved test method independent of NB medium was proposed to precisely quantify the antibacterial effectiveness and efficiency of chitosan.The minimum bactericidal concentration(MBC)of chitosan was 60 μg mL-1 against S.aureus and E.coli,and 0.01％(w/v)chitosan could kill 100％of bacteria within 3 min.From another point of view,the neutralizing efficiency of NB could be tripled by adding 25 g L-1 of sodium chloride.Then the neutraliz-ing mechanism of NB medium was ascribed to flocculation between chitosan and protein.Adding extra sodium chloride could significantly reduce the size of floccules,and smaller floccules would lose the ability of binding with bacteria directly,showing higher neutralizing rate on the macro scale.     

Synthesis of Hollow Three-Dimensional Channels LiNi_(0.5)Mn_(1.5)O_4 Microsphere by PEO Soft Template Assisted with Solvothermal Method

A appropriate size with three-dimension(3 D) channels for lithium diffusion plays an important role in constructing highperforming LiNi_(0.5)Mn_(1.5)O_4(LNMO) cathode materials, as it can not only reduce the transport path of lithium ions and electrons, but also reduce the side effects and withstand the structural strain in the process of repetitive Li~+ intercalation/deintercalation. In this work, an e fficient method for designing the hollow LNMO microsphere with 3 D channels structure by using polyethylene oxide(PEO) as soft template agent assisted solvothermal method is proposed. Experimental results indicate that PEO can make the reagents mingle evenly and nucleate slowly in the solvothermal process, thus obtaining a homogeneous distribution of carbonate precursors. In the final LNMO products, the hollow 3 D channels structure obtained by the decomposition of PEO and carbonate precursor in the calcination can provide abundant electroactive zones and electron/ion transport paths during the charge/discharge process, which benefits to improve the cycling performance and rate capability. The LNMO prepared by adding 1 g PEO possesses the most outstanding electrochemical performance, which presented an excellent discharge capacity of 143.1 mAh g~(-1) at 0.1 C and with a capacity retention of 92.2% after 100 cycles at 1 C. The superior performance attributed to the 3 D channels structure of hollow microspheres, which provide uninterrupted conductive systems and therefore achieve the stable transfer for electron/ion.     

Mechanical and dielectric properties of functionalized boron nitride nanosheets/silicon nitride composites

Uniformly dispersed boron nitride nanosheets (BNNSs) reinforced silicon nitride (Si₃N₄) composites were prepared by surface modification assisted flocculation combined with SPS sintering. In order to improve the dispersibility of the BNNSs in the composites, the liquid phase stripped BNNSs are surface functionalized by a two-step covalently modification. The amino-modified BNNSs (NH₂-BNNSs) and Si₃N₄ powders have opposite surface potential, mixed evenly by electrostatic interaction during flocculation. The results showed that mechanical properties of Si₃N₄ composites were obviously enhanced by adding NH₂-BNNSs. The fracture toughness and bending strength of Si₃N₄ composites added 0.75 wt% NH₂-BNNSs were increased by 34% and 28%, respectively, compared with monolithic Si₃N₄. Toughening mechanisms are synergistic action of the torn, pull-out or bridging of BNNSs and crack deflection mechanisms with microstructural analyzes. The dielectric properties of the Si₃N₄ ceramics are also improved after the addition of NH₂-BNNSs.     

车辆高速避让路径跟踪控制策略

建立车辆动力学模型,研究车辆在高速避让工况下的路径跟踪控制策略。基于自抗扰控制设计车辆横摆角速度以及道路曲率2种不同的路径跟踪控制器;设计基于车辆偏航位移和偏航角度加权的线性二次最优控制器;对3种控制器控制效果进行仿真验证,分析路径跟踪侧向位移误差、侧向加速度、前轮转向角以及偏航角度变化。越野车实车测试结果表明,路径跟踪控制策略正确。