Dry Fractionation Approach in Concentrating Tocopherols and Tocotrienols from Palm Fatty Acid Distillate: A Green Pretreatment Process for Vitamin E Extraction

Palm fatty acid distillate (PFAD) is a rich source of vitamin E. As compared to other vegetable oil, PFAD has higher tocotrienol (70–80%) over tocopherol content, which makes it a valuable source for vitamin E extraction. Current vitamin E extraction methods are not sustainable due to the intensive usage of chemical and high operational cost. Hence, the present study investigated for the first time using dry fractionation process as a green and economical pretreatment method for separating solid fraction (stearin) and liquid fraction (olein) in order to concentrate vitamin E from PFAD in olein fraction. We examined the dry fractionation conditions: crystallization ending temperature (36–44 °C), cooling rate (0.3 and 1.5°C min⁻¹), stirring speed (20–125 rpm), and holding time (0–60 min) on the composition of unsaturated and saturated fatty acids as well as vitamin E content in liquid fraction (olein) and solid fraction (stearin) using gas chromatography and high performance liquid chromatography, respectively. In most of these conditions, vitamin E was ultimately higher in olein fraction as compared to stearin fraction, which is correlated with the high degree of unsaturation. Under a cooling rate of 0.3°C min⁻¹, 90 rpm stirring speed, and ending crystallization of 38 °C, the highest vitamin E rich olein fraction was attained with 1479 ± 10.51 ppm in 50 g olein fraction as compared to 1366 ± 7.94 ppm in 500 g of unfractionated PFAD.     

Formation and Degradation of Beta-casomorphins in Dairy Processing

Milk proteins including casein are sources of peptides with bioactivity. One of these peptides is beta-casomorphin (BCM) which belongs to a group of opioid peptides formed from β-casein variants. Beta-casomorphin 7 (BCM7) has been demonstrated to be enzymatically released from the A1 or B β-casein variant. Epidemiological evidence suggests the peptide BCM 7 is a risk factor for development of human diseases, including increased risk of type 1 diabetes and cardiovascular diseases but this has not been thoroughly substantiated by research studies. High performance liquid chromatography coupled to UV-Vis and mass spectrometry detection as well as enzyme–linked immunosorbent assay (ELISA) has been used to analyze BCMs in dairy products. BCMs have been detected in raw cow's milk and human milk and a variety of commercial cheeses, but their presence has yet to be confirmed in commercial yoghurts. The finding that BCMs are present in cheese suggests they could also form in yoghurt, but be degraded during yoghurt processing. Whether BCMs do form in yoghurt and the amount of BCM forming or degrading at different processing steps needs further investigation and possibly will depend on the heat treatment and fermentation process used, but it remains an intriguing unknown.     

A data‐centric framework for debugging highly parallel applications

Contemporary parallel debuggers allow users to control more than one processing thread while supporting the same examination and visualisation operations of that of sequential debuggers. This approach restricts the use of parallel debuggers when it comes to large scale scientific applications run across hundreds of thousands compute cores. First, manually observing the runtime data to detect error becomes impractical because the data is too big. Second, performing expensive but useful debugging operations becomes infeasible as the computational codes become more complex, involving larger data structures, and as the machines become larger. This study explores the idea of a data‐centric debugging approach, which could be used to make parallel debuggers more powerful. It discusses the use of ad hoc debug‐time assertions that allow a user to reason about the state of a parallel computation. These assertions support the verification and validation of program state at runtime as a whole rather than focusing on that of only a single process state. Furthermore, the debugger's performance can be improved by exploiting the underlying parallel platform because the available compute cores can execute parallel debugging functions, while a program is idling at a breakpoint. We demonstrate the system with several case studies and evaluate the performance of the tool on a 20 000 cores Cray XE6. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermal Protective Properties of the Allomyrina dichotoma Beetle Forewing for Thermal Protection Systems

ABSTRACT

This paper studies the heat-shielding performance of a beetle forewing to explore how it has excellent thermal protective properties. With an experimental setup of a self-developed heating environment, the heat transfer characteristics of the beetle forewing were tested at 50°C under steady state conditions. Two types of the forewings are considered: cut wing and live wing. The heat transfer results show that the live forewing provides a good heat-shielding performance with the heat-shielding index stabilizing at around 22.1%, which is 60% higher than that of the cut wing. Based on scanning electron microscope images of the microstructure of the cross section of the beetle forewing, a simplified finite element analysis is performed to numerically calculate the heat transfer properties of the forewing. The numerical simulations reveal that the proposed structure of the forewing is good for the design of an effective thermal protection system. In addition, the uncertainty analysis is performed to evaluate the quality of experimental data. These results provide a foundational understanding of the heat transfer characteristics of beetle forewing, which will inspire a promising candidate for an actively cooled thermal protection systems.     

Visual Interestingness Prediction: A Benchmark Framework and Literature Review

International Journal of Computer Vision - In this paper, we report on the creation of a publicly available, common evaluation framework for image and video visual interestingness prediction. We...     

Quantification of Tafel coefficients according to passive/active state of steel carbonation‐induced corrosion in concrete

Statistical quantification of Tafel coefficients is investigated in this study for isolated steel rebar embedded in concrete. The survey is supported by a wide experimental campaign carried out earlier to characterize the passive and active states of carbonation‐induced corrosion of steel. Electrochemical measurements (polarization resistance, corrosion potential, Tafel coefficients) and gravimetric estimations of iron loss were regularly conducted over 417 days on 108 concrete specimens. The statistical analysis reveals that the mean value of Tafel coefficients, both cathodic and anodic, is higher under active corrosion, which seems to contradict the general tendency found for chloride‐induced corrosion, while their coefficient of variation is smaller. The statistical inference was based on the first step of distributions fitting the experimental data and then on the second step of goodness‐of‐fit tests. The most suitable of the distributions proposed were the Burr, Rayleigh, and Gamma distributions. A similar analysis was made for the corrosion potential and polarization resistance. The findings of the study will be valuable for probabilistic approaches to corrosion where probabilistic distributions are required.     

Different real-time degradation scenarios of functionalized poly(ε-caprolactone) for biomedical applications

Anterior cruciate ligament (ACL) ruptures are a much-commented injury as it can end the season or even career of professional athletes. However, the recovery of a patient from the general population is no less painful during the long period required by current treatments. Artificial ligaments could improve this healing, yet, orthopedic surgeons are still cautious about permanent ACL implants. Therefore, combining biodegradation and bioactivity could be a key feature for the popularization of these devices. This study aim at evaluating the real-time degradation of poly(ε-caprolactone) (PCL) grafted with the bioactive polymer sodium polystyrene sulfonate in different scenarios. PCL physical–chemical properties were evaluated before and after degradation. In addition, in vitro experiments were realized to confirm the long term influence of the grafting on cell response. Altogether, we were able to show different degradations scenarios, enabling to study the impact of degradation environment on degradation mode and rate of functionalized PCL.