Simultaneous removal of NO/sub x/, SO/sub x/, and CO/sub 2/ at elevated temperature using a plasma-chemical hybrid process

In previous studies, the authors confirmed that the plasma-chemical combined hybrid process for controlling NO flue gas emission was extremely effective and economical in comparison with the conventional selective catalytic reduction (SCR) system and other technologies. In the present study, we carried out experiments on the simultaneous removal of NO/sub x/ and SO/sub x/ at elevated temperature using the plasma-chemical hybrid process. A series of experiments was performed to quantify all the reaction byproducts such as N/sub 2/O, CO, HNO/sub 2/, HNO/sub 3/, NO/sub 3//sup -/, and SO/sub 4//sup -/ to evaluate the simultaneous NO/sub x/ and SO/sub x/ removal efficiency. The oxidation from NO to NO/sub 2/ without decreasing NO/sub x/ concentration (i.e., minimum reaction byproducts) and with least power consumption is the key for the optimum operation of the plasma reactor. The produced NO/sub 2/ was totally converted to N/sub 2/ and Na/sub 2/SO/sub 4/ with Na/sub 2/SO/sub 3/ or Na/sub 2/S with and without NaOH using the barrier-type packed-bed plasma reactor followed by the packed-column chemical reactor. The NO/sub 2/ reduction was more effective for Na/sub 2/S than Na/sub 2/SO/sub 3/ but produces H/sub 2/S with Na/sub 2/S. For both cases at least five times the stoichiometric amount of chemicals were required for complete NO/sub 2/ reduction. Nearly 100% of NO/sub x/ and SO /sub 2/ and 40% Of CO/sub 2/ simultaneous removal were achieved with less than 5 ppm of N/sub 2/O and CO. The operating cost was less than 1/4 the SCR process. The additional SO/sub 2/ treatment system can be eliminated.     

Enhanced Infrared Absorption of C60 on Thin Evaporated Pd Island Films

Infrared transmission spectra of C₆₀ multilayers on thin Pd films deposited onto surface-oxidized Si(100) and hydrogen-terminated Si(111) substrates are reported. In both cases, the spectra in the 1500–1100 cm⁻¹ region exhibited bands at 1444, 1429, and 1182 cm⁻¹ due, respectively, to the A_g (2), T_1u (4), and T_1u (3) modes. The appearance of the A_g (2) mode, which is originally infrared inactive (Raman active), reveals electron transfer from the metal to chemisorbed C₆₀. Indeed, increasing the thickness of C₆₀, the A_g (2) mode intensity saturated more rapidly than the T_1u (4) and T_1u (3) modes. The originally infrared active T_1u (4) and T_1u (3) modes were enhanced in intensity depending upon the Pd thickness. Actually, while both substrates gave nearly the same magnitude of enhancement, the optimum Pd thickness was smaller on the hydrogen-terminated surface than on the surface-oxidized surface. On the other hand, the A_g (2) mode was less intense on the hydrogen-terminated surface than on the oxidized surface, suggestive of a shortage of chemisorbed C₆₀ and thus pointing out the importance of the metal film morphology. Indeed, Pd films deposited on the two substrates gave rise to quite different AFM images. We also show that, regardless of the substrate, the A_g (2) mode is an order of magnitude smaller than for Ag deposition, though no remarkable intensity differences were observed with respect to the T_1u (4) and T_1u (3) modes.     

Hiding an image with a light-scattering medium and use of a contrast-discrimination method for readout

Hiding image data with a material such as a light-scattering medium is useful as an initial stage of data protection, because the hidden image can be detected only by observation with a specific technique. A light-scattering medium is used to hide the image data, and a low-temporal-coherence interferometer performs the readout processing. A new readout method for detecting pixel values of the image is proposed to overcome spatial variation of the light intensity and distortion of the interference fringes. The introduction of spatial coding further improves the performance by overcoming spatial variations of the light-scattering medium and variations in the reflectance of given pixels.     

Remineralization effects of xylitol on demineralized enamel

We morphologically determined the effects of xylitol on the remineralization of artificially demineralized enamel. The samples were demineralized and then immersed in a remineralizing solution with or without 20% xylitol at 37 degrees C for 2 weeks. Samples were observed using contact microradiography, a multipurpose image processor (MIP) and a high-resolution electron microscope (HRTEM). Contact microradiography indicated that remineralization occurred in the surface and deep layers of samples immersed in a non-xylitol solution. Samples immersed in a xylitol solution demonstrated less mineralization in the outer 10 microm of the outermost surface layers, but more mineralization in the middle and deep layers, than was observed in the non-xylitol samples. The MIP evaluation indicated that remineralization was more prominent in layers at depths of 50-60 microm in the xylitol samples than in the non-xylitol samples. Observation of the xylitol samples by HRTEM revealed crystals of various sizes and irregular shapes with unclear crystal angles in the outermost surface layers. In the middle layers, they had thickened and angles of crystals are clear. These results indicate that xylitol can induce remineralization of deeper layers of demineralized enamel by facilitating Ca2+ movement and accessibility.     

Impedance calculation of a single-layer air-core coil by means of resonant modal theory

A method for calculating the impedance of a single-layer air-core coil is developed. The coil is expressed by a pair of multiphase distributed-parameter lines. The nodal voltages within the coil are transformed into a modal domain by applying an eigen theory. The transformation diagonalises the nodal equation expressed by Y-parameters of the distributed-parameter lines. The method permits composition of an equivalent circuit of the air-core coil. The accuracy of the model is easily tuned by adjusting the number of eigenvalues taken into account. The choice of the eigenvalues is carried out by the voltage distribution along the wire of the coil. The dominant mode is obtained by an assumption that the voltage distribution is uniform. This mode gives the lowest antiresonant frequency of the coil. The other distribution patterns are assumed to be sinusoidal. The second dominant mode corresponds to the lowest space frequency among the distribution patterns. In general, there is no relation between the order of the calculated eigenvectors and the voltage distribution. Its order is sorted according to the voltage distribution using an initial eigenvector matrix. The accuracy of the impedance increases with the number of eigenvalues, which are taken into account according to the sorted order. A simplified lumped-parameter equivalent circuit of the coil is derived for the major modes. The simplified model is able to represent not only antiresonances but also resonances of an air-core coil. The accuracy of the proposed model is confirmed by comparisons with measured and theoretical results.     

Characterisation of optically driven microstructures for manipulating single DNA molecules under a fluorescence microscope

Optical tweezers are powerful tools for manipulating single DNA molecules using fluorescence microscopy, particularly in nanotechnology‐based DNA analysis. We previously proposed a manipulation technique using microstructures driven by optical tweezers that allows the handling of single giant DNA molecules of millimetre length that cannot be manipulated by conventional techniques. To further develop this technique, the authors characterised the microstructures quantitatively from the view point of fabrication and efficiency of DNA manipulation under a fluorescence microscope. The success rate and precision of the fabrications were evaluated. The results indicate that the microstructures are obtained in an aqueous solution with a precision ∼50 nm at concentrations in the order of 10⁶ particles/ml. The visibility of these microstructures under a fluorescence microscope was also characterised, along with the elucidation of the fabrication parameters needed to fine tune visibility. Manipulating yeast chromosomal DNA molecules with the microstructures illustrated the relationship between the efficiency of manipulation and the geometrical shape of the microstructure. This report provides the guidelines for designing microstructures used in single DNA molecule analysis based on on‐site DNA manipulation, and is expected to broaden the applications of this technique in the future.Inspec keywords: DNA, molecular biophysics, fluorescence, optical microscopy, radiation pressure, biological techniquesOther keywords: optically driven microstructures, single DNA molecule analysis, fluorescence microscopy, optical tweezers, nanotechnology‐based DNA analysis, manipulation technique, aqueous solution, fine tune visibility, yeast chromosomal DNA molecules, geometrical shape, on‐site DNA manipulation     

Speech recognition in living rooms: Integrated speech enhancement and recognition system based on spatial,spectral and temporal modeling of sounds

Research on noise robust speech recognition has mainly focused on dealing with relatively stationary noise that may differ from the noise conditions in most living environments. In this paper, we introduce a recognition system that can recognize speech in the presence of multiple rapidly time-varying noise sources as found in a typical family living room. To deal with such severe noise conditions, our recognition system exploits all available information about speech and noise; that is spatial (directional), spectral and temporal information. This is realized with a model-based speech enhancement pre-processor, which consists of two complementary elements, a multi-channel speech–noise separation method that exploits spatial and spectral information, followed by a single channel enhancement algorithm that uses the long-term temporal characteristics of speech obtained from clean speech examples. Moreover, to compensate for any mismatch that may remain between the enhanced speech and the acoustic model, our system employs an adaptation technique that combines conventional maximum likelihood linear regression with the dynamic adaptive compensation of the variance of the Gaussians of the acoustic model. Our proposed system approaches human performance levels by greatly improving the audible quality of speech and substantially improving the keyword recognition accuracy.     

Epitaxial growth of titanium oxide thin films on MgO(100) single-crystal substrates by reactive deposition methods

We synthesized titanium oxide thin films on MgO(100) single-crystal substrates by two reactive deposition methods and compared the structures of the thin films formed by these methods. In one method (pulsed-molecular-beam deposition method), molecular oxygen is supplied to the substrates by using a pulsed-molecular-oxygen beam source and deposition of one unit layer of titanium and subsequent supply of molecular oxygen are repeatedly performed. In the other method (radical beam deposition method), atomic oxygen is irradiated to the substrates by using an atomic oxygen beam generated by the radical beam source and irradiation of the atomic oxygen and deposition of titanium are simultaneously performed. In the case of the pulsed-molecular-beam deposition method, the crystal structure was changed by increasing the number of oxygen pulses supplied from the beam source. We found that the crystal structure of titanium oxide depended on the composition ratio of O:Ti in the film. The maximum ratio of O:Ti attainable by this method was 1.85, and at this ratio, (100)-oriented pseudorutile was formed. In the case of the radical beam deposition method, (100)-oriented anatase was formed below the titanium deposition rate of 0.10 nm/s and pseudorutile (TiO_2−δ) was formed above 0.15 nm/s. The pseudorutile structure synthesized on this experiment was very stable in air. We concluded that the crystal structure of the pseudorutile is a new crystal structure of titanium oxide.