3-苯甲酰基苯乙腈单甲基化的研究

以3-苯甲酰基苯乙腈为原料,采用碳酸二甲酯进行α-甲基化反应制备2-(3苯甲酰基苯基)丙腈,使反应控制在单甲基化阶段,HPLC测定产物含量99.7%。同时探讨了催化剂的选择、反应温度、反应时间对反应的影响。     

Preparation and rheology of polyamide-6/attapulgite nanocomposites and studies on their percolated structure

The polyamide-6/attapulgite nanocomposites were prepared via an in situ polymerization route with attapulgites pre-modified with cetyltrimethylammonium bromide (CTAB) and toluene-2,4-diisocyanate (TDI). Morphology observation showed that the exfoliated attapulgite fibers were well dispersed in the polyamide-6 matrix on a nanometer scale and formed a percolation network structure. The rheological behaviors of such polymer/fibrous clay nanocompostie samples were investigated by an ARES rheometer with parallel plate geometry. The storage moduli (G′), loss moduli (G″), and dynamic viscosities of these samples increased monotonically with attapulgite content at low frequencies. The presence of attapulgites caused these nanocomposite melts to have solid-like behaviors and slower relaxation. This behavior can be explained in terms of the development of a grafting-percolated fibrous-silicate network structure. Monte Carlo simulations were performed to determine the critical threshold for attapulgites fibers in 3D. The calculated critical threshold from simulations fitted the results of our rheological experiments very well.     

炭黑表面的纳米结构对橡胶的补强作用

通过扫描隧道显微镜(STM)技术了解到炭黑粒子表面的鳞片状石墨微晶组成的纳米级精细结构，并研究炭黑对橡胶的补强机理。研究表明，炭黑表面的纳米结构使橡胶分子链网络缠绕在炭黑表面，并将外来应力分散到其它分子网络上，共同分担应力，使橡胶弹性体体系不至于迅速破坏。     

低温快烧无铅精陶釉的研制

采用高温熔融法制备了适用精陶的低温无铅熔块，并应用热膨胀分析仪、SEM等方法研究了精陶釉的光泽度、热稳定性、热膨胀系数等性能。结果表明：采用Li2O，SrO，B2O3等复合熔剂，可以制备出光泽度高，热稳定好，坯釉膨胀系数匹配，结合良好，适于低温快烧工艺的无铅精陶釉。     

耐热性橡胶配合技巧(上)

介绍了耐热橡胶的等级划分，各种橡胶的使用温度和性能特点，及13种橡胶（天然橡胶、聚氨酯橡胶、丁苯橡胶、顺丁橡胶、氯丁橡胶、丁腈橡胶、氯磺化聚乙烯橡胶、氯醚橡胶、丁基橡胶、乙丙橡胶、丙烯酸酯橡胶、氟橡胶、硅橡胶）的78个耐热配方实例，并对配方做了简要说明。所述配方可基本满足橡胶材料从A～I级9个耐热等级的不同要求。     

铌酸催化合成乙酸苯乙酯

将铌酸用于催化合成乙酸苯乙酯 ,在醇酸摩尔比 1∶5 ,回流反应 2h ,催化剂用量 (以 1mol醇计 )为 5g的条件下 ,酯收率可达 84 .3%以上。催化剂不经处理 ,可多次循环使用 ,不污染环境 ,相对于一些其他催化剂 ,具有明显的优点。     

墙地砖边缘检测中的小波去噪

在墙地砖的边缘检测过程中,噪声的引入是不可避免的,有效地消除噪声而不影响检测结果是检测过程中需要解决的关键问题。本文采用了小波去噪方法—对图像进行去噪后再进行边缘检测的方法,其检测结果较好地满足了检测要求。     

优化技术在原油管输调度中的应用

以甬沪宁原油管网为例,说明调度优化系统将数学规划模型和仿真模型2种调度方法完美结合,首先采用数学规划模型计算出最优解或可行的满意解,然后将结果导入仿真模型进行模拟,修正数学模型近似或忽略的因素.主要描述混合整数线性规划技术以及仿真技术在原油管输调度中的应用及应用的初步效果.     

非晶态化学镀Ni-Sn-P合金镀层变温晶化的研究

研究了非晶态Ni-Sn-P合金镀层的变温化过程,由实验得出Ni-Sn-P合金约在350℃开始晶化,450℃左右晶化结束,并测得Ni-Sn-P合金变温晶化激活能为233KJ·moL~(-1)。     

A heuristic biomarker selection approach based on professional tennis player ranking strategy

Extracting significant features from high-dimension and small sample size biological data is a challenging problem. Recently, Micha? Draminski proposed the Monte Carlo feature selection (MC) algorithm, which was able to search over large feature spaces and achieved better classification accuracies. However in MC the information of feature rank variations is not utilized and the ranks of features are not dynamically updated. Here, we propose a novel feature selection algorithm which integrates the ideas of the professional tennis players ranking, such as seed players and dynamic ranking, into Monte Carlo simulation. Seed players make the feature selection game more competitive and selective. The strategy of dynamic ranking ensures that it is always the current best players to take part in each competition. The proposed algorithm is tested on 8 biological datasets. Results demonstrate that the proposed method is computationally efficient, stable and has favorable performance in classification.