矿山磨光球用钢XK5159H的生产试制

XK5159H钢连铸连轧棒材用于制造矿山磨光球，对于钢的纯净度、低倍组织、探伤结果及DI值等均有严格的要求，很难控制。我们通过制定内控化学成分及合理的工艺路线，使生产试制一次成功。     

SiCp/Cu包覆粉体及其热沉材料的制备

采用化学镀铜工艺制备了Cu包覆SiCp复合粉体,并对复合粉体的组成和形貌进行了分析.同时,利用制得的复合粉体,结合适当的热压烧结工艺制备了Cu-35SiCp热沉材料,并对热沉材料的微观组织和热物理性能进行了研究.结果表明,SiCp颗粒在热沉材料的基体中均匀分布,界面结合良好.在试验条件下,Cu-35SiCp热沉材料的导热系数为165.7 W/(m·K),30～200 ℃温度区间内的热膨胀系数为15.1×10-6/K.     

SBTV铁电材料的制备和微观组织结构

采用固相反应法合成了SrBi2Ta2O9(简称SBT)和V掺杂SrBi2Ta2O9(简称SBTV)陶瓷,通过TG-DTA、XRD、SEM、TEM等技术手段研究了材料的烧结工艺、相组成和微观组织结构.研究表明V2O5是一种很好的助烧剂,掺杂后材料的烧结温度可降低200℃烧结后纯SBT均为单一的钙钛矿相SBT;掺杂后2种成型工艺所制备的SBTV除了生成少量Bi4(V2O11)外,仍主要由钙钛矿相组成;同时所有的材料都发生了一定程度的择优取向.掺杂后材料的晶粒形态发生变化棒状转化为片状.同时V掺杂后引起了晶格畸变,产生应变,SBTV材料在透射中观察到具有α-边界特征的90°畴.     

Effect of temperature on anodic behavior of 13Cr martensitic steel in CO2 environment

The corrosion behavior of 13Cr martensitic stainless steel in a CO₂ environment in a stimulated oilfield was studied with potentiodynamic polarization and the impedance spectra technique. The results showed that the microstructure of the surface scale clearly changed with temperature. This decreased the sensitivity of pitting corrosion and increased the tendency toward general (or uniform) corrosion. The capacitance, the charge transfer resistance, and the polarization resistance of the corrosion product scale decrease with increasing temperature from 90 to 120 °C, and thus the corrosion is a thermal activation controlled process. Charge transfer through the scale is difficult and the corrosion is controlled by a diffusion process at a temperature of 150 °C. Resistance charge transfer through the corrosion product layer is higher than that in the passive film.     

超滤法生产锦橙清汁的研究

采用不同超滤膜进行锦橙汁的澄清试验，测定透液通量和清汁万分的变化，评价澄清效果，试探膜的清洗方法，结果表明：几种膜均能得到稳定的锦橙清汁，ＰＡＮ５万膜透液通量最大。     

Study on Tribological Properties of Polytetrafluoroethylene Drawn Uniaxially at Different Temperature

Summary: Wear behavior correlations with morphology have been established from polytetrafluoroethylene (PTFE) drawn at 200, 327, and 375 °C with draw ratio about 4. The friction coefficient and wear rate for PTFE drawn at 327 °C are lower and the wear rate is lower than that of undrawn PTFE by about 30%. The structures of samples were characterized by scanning electron microscope (SEM), DSC, and wide angle X‐ray diffraction (WAXD). Results indicate that the debris morphologies of samples are different. The differences in the tribological behavior of undrawn and drawn samples were attributed to the improvement of the degree of the crystalline, fibrillation, and orderliness by drawing, especially, for PTFE drawn at 327 °C. The orderliness of molecular arrangement along the drawn direction is also higher for PTFE drawn at 327 °C than those of PTFE drawn at 200 and 375 °C, respectively. Therefore, the intensity of covalent bond along drawn direction is higher. The shear resistance and the deformability of the material are greatly improved and the size of the wear breakage unit decreases, which results in a good tribological property for PTFE drawn at 327 °C.

SEM morphology of fractured surface perpendicular to the draw direction for PTFE drawn at 327 °C.     

一种新的感度试验与分析方法

介绍了一种新的感度试验设计与分析方法，即Ｎｅｙｅｒ法。它利用最大似然估计来选择下一个试验水平，利用似然比试验可计算任意置信区间，并以Ｃｒａｍｅｒ－Ｒａｏ理论为基础，可以分析所有感度试验结果。     

光敏树脂的研制

本文介绍了环氧丙烯酸醌和聚氨酯丙烯酸酯这两种光敏树脂的合成方法，固化体系的选择，并对几种光固化引发体系作了比较。本文还就电子转移敏化剂在光固化反应中的应用作了初步探索。     

单组分阴离子水性聚氨酯胶膜的热质研究

应用热质分析（TG）研究了单组分阴离子水性聚氨酯胶膜的耐热性能，结果表明：n（--NCO）：n（--OH）增大，胶膜的耐热性能增强；聚酯相对分子质量增加，耐高温性能降低；用DEG扩链时的耐高温性能比用DEG／TMP时的好；TDI型水性聚氨酯成膜物的耐高温性能优于IPDI型水性聚氨酯。     

免水型生态卫生设施用降解菌的分离筛选

本文对免水型生态卫生设施中的生物填料及施有机肥农田的土壤进行了人类粪便降解菌的分离。筛选得到的各菌种在实验条件下，降解粪便效果较好，除臭除味，COD下降率在30％左右。其中在土壤中分离出来的9号菌，COD下降率达41％，全部菌种复合培养处理的下降率高达59％。结果表明，实验采用的分离筛选方法是比较有效的，筛选得到了具有较好降解效果的菌种，为降解菌的进一步试验打下了基础。