In situ polymerization of flame retardant modification polyamide 6,6 with 2-carboxy ethyl (phenyl) phosphinic acid

A novel halogen-free flame retardant copolyamide 6,6 (FR-PA66) was prepared successfully by in situ polymerizing with adipic acid hexamethylene salt and 2-carboxy ethyl (phenyl) phosphinic acid (CEPPA). The elemental composition and chemical structure of FR-PA66 were characterized by energy dispersive X-ray spectroscopy, Fourier transform infrared spectrometer and ¹³C Nuclear magnetic resonance spectrometer. The flame retardancy, thermal stability, and morphology of char residues were also investigated by the limiting oxygen index (LOI), UL 94 test, thermogravimetric analysis, and scanning electron microscopy. The results showed that FR-PA66 samples had much better flame retardancy and char formation ability than pure PA66 after the flame retardant modification. The LOI values were increased from 24.0 to 28.0% by adding 6 wt % of CEPPA and all FR-PA66 samples were rated as V-0 rating in UL-94 test. Furthermore, the thermal stability analysis indicated that in situ polymerization with CEPPA effectively decreased the initial decomposition temperature and increased the amount of char residue. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48687.     

苏通GIL运输专用机具动力电池类型探讨

GIL运输专用机具是为安全、可靠、高效地完成苏通GIL综合管廊工程GIL单元的运输任务而研制的专用机具,其中动力电池系统设计是整机设计的重点之一。通过对各种常见动力电池优缺点的分析,并结合苏通GIL运输专用机具对动力电池的需求分析,确定了动力电池系统的技术路线,为苏通GIL运输专用机具的研制提供了坚实的基础。     

浅谈大断面巷道掘进技术的实践与体会

该文针对当前矿井炮掘巷道大断面掘进普遍存在掘进施工较慢的实际,结合公司实际情况,有针对性地提出了解决的办法。     

0.88C-1.2Si-0.75Mn-2Al高强度电缆铠装钢用盘条的试制

采用中高碳成分添加低密度元素Si、Al进行轻量化的设计思路设计了试验钢的化学成分,试验钢采用50 kg真空感应炉冶炼。利用金相显微镜、SEM扫描电镜和力学性能检测设备对试制后的Φ6 mm盘条进行了显微组织观察、珠光体片层间距的测量和屈服强度、抗拉强度、延伸率的检验。结果表明:盘条在600℃等温2 h后的金相显微组织为铁素体+珠光体的混合组织,珠光体的片层间距为(126±5) nm,屈服强度大于1 183 MPa、抗拉强度大于1 425 MPa、延伸率大于10%,其力学性能满足电缆用铠装钢的技术要求。     

Operating Range Scheduled Robust Dahlin Algorithm to Typical Industrial Process with Input Constraint

International Journal of Control, Automation and Systems - There is a class of typical nonlinear industrial process, which can be characterized by a first-order inertia plus pure delay model in an...     

Multi-objective layout optimization for an orbital propellant depot

Structural and Multidisciplinary Optimization - The overall layout optimization design of an orbital propellant depot involves the optimization of shape, size, and positions of propellant tanks in...     

主/次显示器视距设计对头部关节舒适度的影响

以视平线可与显示器中心重合为准,分别探讨显示器中心在视平线上方、下方时不同视距对头部关节舒适度的影响. 实验自变量为视距(眼睛与显示器中心的水平距离),因变量为头部关节舒适度. 实验结果显示:1)显示器中心在人视平线上方时,头部舒适性状态始终处于不舒适状态,此时视距与人的头部舒适性关系成正比,即视距越大,头部舒适性越好;2)显示器中心在人视平线下方时,头部关节舒适状态始终处于正常范围,舒适性程度随视距增大而减小.     

ZSM-5沸石膜用于生物油的脱水分离及其再生过程研究

在水热条件下通过无模板剂法合成了连续的ZSM-5沸石膜，并将其用于生物油的渗透汽化以进行高效脱水分离。ZSM-5沸石膜在强酸性、多组分的生物油体系中保持了很好的化学稳定性和优异的分离选择性，但在分离过程中面临着较强的膜污染问题，导致了膜通量的大幅下降。ZSM-5沸石膜的再生研究表明，膜的渗透通量随着再生温度的升高而逐渐提高。当再生温度为220℃时，ZSM-5沸石膜的渗透通量可以恢复至初始的88%。再生的机理研究表明，ZSM-5沸石膜中大量的晶内孔在生物油体系中极易被污染，从而导致渗透通量迅速下降；而相对较大的晶间孔却难以被完全堵塞，水分子在被污染的ZSM-5沸石膜中主要通过晶间孔进行渗透。上述结果表明，通过合理调控ZSM-5沸石膜的晶间孔的数量和尺寸大小可有效提升ZSM-5沸石膜在生物油中的渗透汽化脱水分离性能。