一种高性能的新结构IGBT

提出了一种低功率损耗的新结构IGBT.该新结构的创新点在于其复合耐压层结构,该耐压层包括深扩散形成的n型缓冲层和硼注入形成的透明背发射区两部分.虽然在正常工作条件下,该新结构IGBT工作于穿通状态,但器件仍具有非穿通IGBT(NPT-IGBT)的优良特性.该新结构IGBT具有比NPT-IGBT更薄的芯片厚度,从而可以获得更好的通态压降和关断功耗之间的折衷.实验结果表明:与NPT-IGBT相比较,新结构IGBT的功率损耗降低了40%.     

Preparation, patterning and luminescent properties of nanocrystalline Gd2O3:A (A=Eu, Dy, Sm, Er) phosphor films via Pechini sol–gel soft lithography

Nanocrystalline Gd₂O₃:A (A=Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺) phosphor films and their patterning were fabricated by a Pechini sol–gel process combined with a soft lithography. X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical microscopy, UV/vis transmission and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting films. The results of XRD indicated that the films began to crystallize at 500 °C and that the crystallinity increased with the elevation of annealing temperatures. Uniform and crack free non-patterned phosphor films were obtained by optimizing the composition of the coating sol, which mainly consisted of grains with an average size of 70 nm and a thickness of 550 nm. Using micro-molding in capillaries technique, we obtained homogeneous and defects-free patterned gel and crystalline phosphor films with different stripe widths (5, 10, 20 and 50 μm). Significant shrinkage (50%) was observed in the patterned films during the heat treatment process. The doped rare earth ions (A) showed their characteristic emission in crystalline Gd₂O₃ phosphor films due to an efficient energy transfer from Gd₂O₃ host to them. Both the lifetimes and PL intensity of the rare earth ions increased with increasing the annealing temperature from 500 to 900 °C, and the optimum concentrations for Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺ were determined to be 5, 0.25, 1 and 1.5 mol% of Gd³⁺ in Gd₂O₃ films, respectively.     

Logistic模型的改进及在油藏可采储量预测中的应用

为了更准确地预测油气藏未来的经济可采储量，依据油气藏随开发必然要经历产量递减和生产收支平衡的实际。利用Logistic模型中技术可采储量、产量与时间的相互关系，经推导和改进后，再结合当前经济技术条件下的废弃产油量，预测油气藏的有效生产时间及其经济可呆储量。实践证实，改进后的Logistic模型预测结果更符合油气藏的生产实际，能为油气藏的储量管理提供可靠的依据。     

Joint scheduling and power control supporting multicasting in wireless ad hoc networks

This paper addresses the problem of power control in a multihop wireless network supporting multicast traffic. We face the problem of forwarding packet traffic to multicast group members while meeting constraints on the signal-to-interference-plus-noise ratio (SINR) at the intended receivers. First, we present a distributed algorithm which, given the set of multicast senders and their corresponding receivers, provides an optimal solution when it exists, which minimizes the total transmit power. When no optimal solution can be found for the given set of multicast senders and receivers, we introduce a distributed, joint scheduling and power control algorithm which eliminates the weak connections and tries to maximize the number of successful multicast transmissions. The algorithm allows the other senders to solve the power control problem and minimize the total transmit power. We show that our distributed algorithm converges to the optimal solution when it exists, and performs close to centralized, heuristic algorithms that have been proposed to address the joint scheduling and power control problem.     

基于MATLAB的风能自校正自调整PID模糊控制器仿真研究

为了提高风力发电系统综合系统性能,在传统风力发电技术的基础上,对变速风力发电机组的自校正自调整PID模糊控制进行了详细的分析和研究,从而利用模糊控制和PID控制相结合的技术,取得了很好的效果。从MATLAB仿真结果看出系统精度及效率很高而稳态误差较小,鲁棒性较好。     

加入WTO后对中国会计业的影响

中国政府已于2001年12月正式加入做为当代世界规范和经济贸易关系最具权威的国际性组织WTO.加入WTO,对中国来说既是机遇,同时又是挑战,它的影响是全面的、全方位的.而对于中国会计业的影响也是深刻的,中国经济、中国企业要走向世界,中国的会计业也必须直面世界,按国际惯例行事,因此,深刻研究和分析加入WTO后对中国会计业的冲击、挑战以制定相应的政策、方针、准则就显得非常的迫切.     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Patterning issues for the fabrication of sub-micron memory capacitors' electrodes

This paper describes some of the key issues associated with the patterning of metal electrodes of sub-micron (especially at the critical dimension (CD) of 0.15 μm) dynamic random access memory devices. Due to reactive ion etching lag, the Pt etch rate decreased drastically below the CD of 0.20 μm and thus K-th storage node electrode with the CD of 0.15 μm could not be fabricated using the Pt electrodes. Accordingly, we have proposed novel techniques to surmountly-the above difficulties. The Ru electrode cannot for the stack-type structure is introduced and alternative multischemes based on the introduction of the concave-type selfstructure upto using semi-Pt or Ru as an electrode material are outlined respectively.     

Boundary element analysis of thermal stress intensity factors for interface griffith and cusp cracks

The thermal stress intensity factors for interface cracks of Griffith and symmetric lip cusp types under vertical uniform heat flow in a finite body are calculated by the boundary element method. The boundary conditions on the crack surfaces are insulated or fixed to constant temperature. The relationship between the stress intensity factors and the displacements on the nodal point of a crack-tip element is derived. The numerical values of the thermal stress intensity factors for an interface Griffith crack in an infinite body are compared with the previous solutions. The thermal stress intensity factors for a symmetric lip cusp interface crack in a finite body are calculated with respect to various effective crack lengths, configuration parameters, material property ratios and the thermal boundary conditions on the crack surfaces. Under the same outer boundary conditions, there are no appreciable differences in the distribution of thermal stress intensity factors with respect to each material property. However, the effect of crack surface thermal boundary conditions on the thermal stress intensity factors is considerable.     

绝对时钟智能控制器的研制

介绍了一种日常参数智能控制器的研制及研制过程中的几个重要问题的解决方法。特别是用于城市照明及美化城市的彩灯的开、关时间智能控制方面，给出了依据当地绝对时间、经度、纬度进行昼夜时间计算的方法，使之在不接光电传感器情况下可跟踪季节的昼夜变化。控制系统采用８９Ｃ２０５１单片机，配有时钟日历芯片ＤＳ１２８８７，系统体积小、功能强、可靠性高。