隧道衬砌栈桥模型重构及车-栈桥系统共振分析

针对隧道衬砌栈桥结构,以栈桥主体构架的轻量化为研究目标,通过中心组合试验设计方法获取设计点,建立多目标数值模型,采用多目标遗传算法计算数值模型的最优解。以最优解的设计参数为重构模型的尺寸参数,对重构模型进行仿真检验和车-栈桥系统共振分析,分析结果表明:栈桥结构受总承载65t时,重构模型相比原模型,最大变形增大了8mm,最大应力增大了32.4MPa,质量下降了13.86%,充分利用了强度、刚度盈余以达到轻量化的目的,且车辆运行速度避开了影响共振的危险速度。     

A distributed energy system integrating SOFC-MGT with mid-and-low temperature solar thermochemical hydrogen fuel production

Solar thermochemical hydrogen production with energy level upgraded from solar thermal to chemical energy shows great potential. By integrating mid-and-low temperature solar thermochemistry and solid oxide fuel cells, in this paper, a new distributed energy system combining power, cooling, and heating is proposed and analyzed from thermodynamic, energy and exergy viewpoints. Different from the high temperature solar thermochemistry (above 1073.15 K), the mid-and-low temperature solar thermochemistry utilizes concentrated solar thermal (473.15–573.15 K) to drive methanol decomposition reaction, reducing irreversible heat collection loss. The produced hydrogen-rich fuel is converted into power through solid oxide fuel cells and micro gas turbines successively, realizing the cascaded utilization of fuel and solar energy. Numerical simulation is conducted to investigate the system thermodynamic performances under design and off-design conditions. Promising results reveal that solar-to-hydrogen and net solar-to-electricity efficiencies reach 66.26% and 40.93%, respectively. With the solar thermochemical conversion and hydrogen-rich fuel cascade utilization, the system exergy and overall energy efficiencies reach 59.76% and 80.74%, respectively. This research may provide a pathway for efficient hydrogen-rich fuel production and power generation.     

浅析火力发电厂汽水系统中内径管与外径管的设计选择

按照管道加工工艺的不同,管道可分为内径控制管和外径控制管。通过热轧工艺生产的外径控制无缝钢管,可满足火力发电厂汽水系统中绝大部分管道的使用要求。对于超(超)临界机组的主蒸汽和高温再热蒸汽管道采用的P91/P92材质的大口径厚壁无缝钢管,由于对材料性能和加工工艺有特殊要求,因此宜采用内径控制管。     

甲基氯硅烷精馏流程的模拟与优化

采用Aspen plus软件对工业七塔精馏过程进行全流程建模与模拟，优化工艺参数，研究了新的精馏节能工艺。对一甲塔等7个精馏塔采用双因素水平的灵敏度分析，考察了塔釜采出率、回流比、进料位置和塔顶压力对产品浓度和热负荷的影响，确定一甲塔最优的工艺参数：塔釜摩尔采出率为0.92，摩尔回流比为130，塔顶压力为0.18 MPa，总理论板数为400，在210块理论板位置进料。在此基础上，针对高能耗的脱高塔/脱低塔，模拟研究了双效精馏新工艺，新工艺可节省39.70%的年总成本；针对一甲塔模拟研究了热泵精馏新工艺，新工艺可降低41.42%的年总成本。     

温度对生物净化滤柱中氨氮、铁、锰去除效果的影响

温度是生物净化滤柱运行的一个重要参数，采用生物净化滤柱处理模拟含氨氮、铁、锰地下水，考察水温从约25℃降到约6℃过程中氨氮、铁、锰的去除效果。结果表明，出水氨氮、总铁、锰的浓度分别低于0.15mg/L、0.1mg/L、0.05mg/L，均低于国家标准。出水总铁、锰均未受到水温下降的影响，但是出水氨氮浓度逐渐从约0.02mg/L升高到约0.12mg/L。进一步分析发现，铁主要在滤层的0~0.4m段去除，去除效果没有受到水温变化的影响。氨氮、锰主要在滤层的0~0.8m段去除，其沿程浓度均随水温降低而明显升高。氨氮、锰的生物去除符合一级动力学反应，水温为24.6℃、15.3℃、6.7℃时，两者的动力学常数k分别为0.154min^-1、0.186min^-1，0.143min^-1、0.175min^-1，0.103min^-1、0.163min^-1；半反应时间t_1/2分别为4.51min、3.72min，4.83min、3.96min，6.72min、4.24min。随着试验水温的降低，氨氮、锰的去除效果明显受到影响。     

Dandelion-Like Bi2S3/rGO hierarchical microspheres as high-performance anodes for potassium-ion and half/full sodium-ion batteries

Sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) have been considered as attractive alternatives for next-generation battery systems, which have promising application potential due to their earth abundance of potassium and sodium, high capacity and suitable working potential, however, the design and application of bi-functional high-performance anode still remain a great challenge up to date. Bismuth sulfide is suitable as anode owing to its unique laminar structure with relatively large interlayer distance to accommodate larger radius ions, high theoretical capacity and high volumetric capacity etc. In this study, dandelion-like Bi₂S₃/rGO hierarchical microspheres as anode material for PIBs displayed reversible capacity, and 206.91 mAh·g⁻¹ could be remained after 1,200 cycles at a current density of 100 mA·g⁻¹. When applied as anode materials for SIBs, 300 mAh·g⁻¹ could be retained after 300 cycles at 2 A·g⁻¹ and its initial Coulombic efficiency is as high as 97.43%. Even at high current density of 10 A·g⁻¹, 120.3 mAh·g⁻¹ could be preserved after 3,400 cycles. The Na₃V₂(PO₄)₃@rGO//Bi₂S₃/rGO sodium ion full cells were successfully assembled which displays stable performance after 60 cycles at 100 mA·g⁻¹. The above results demonstrate that Bi₂S₃/rGO has application potential as high performance bi-functional anode for PIBs and SIBs.

     

砖混再生粗骨料混凝土力学性能及工程应用研究

采用城市砖混结构拆除建筑垃圾加工制成的再生粗骨料,用不同配合比设计方法制备了砖混再生粗骨料混凝土,研究了砖混再生粗骨料对混凝土工作性、抗压强度、弹性模量、峰值应力、峰值应变以及应力应变关系的影响.结果 表明,相比较天然骨料和废弃混凝土制备的再生骨料,砖混再生骨料空隙率大,吸水率大,压碎指标高.使用附加用水量配合比方法制备的砖混再生粗骨料混凝土在力学性能上低于标准配合比方法制备的砖混再生粗骨料混凝土,但工作性能较好.随着砖混再生粗骨料取代率的增加,再生混凝土的力学性能呈现不同程度的降低.当取代率为100％时,使用标准配合比和附加用水量方法制备的再生混凝土28 d抗压强度分别降低了26.1％和11.9％,弹性模量分别降低了23.9％和22.9％,峰值应力分别降低了13.0％和21.9％,峰值应变分别增大了25.3％和14.9％.工程实践表明,采用砖混再生粗骨料配制的再生混凝土可以满足中低强度等级泵送混凝土的性能要求.     

一种军棋机器博弈的多棋子协同博弈方法

针对在军棋博弈不完全信息对弈中，面对棋子不同价值、不同位置、不同搭配所产生的不同棋力，传统的单子意图搜索算法，不能满足棋子之间的协同性与沟通性，同时也缺乏对敌方的引诱与欺骗等高级对抗能力。本文提出一种结合UCT搜索策略的高价值棋子博弈方法，实现高价值棋子协同博弈的策略。实战经验表明:高价值多棋子军棋协同博弈策略优于单棋子军棋博弈策略。