水对植物纤维水泥复合板生产的影响

研究了水对植物纤维水泥复合板性能的影响。选择合适的水分可以提高板材静弯曲强度,减小板材变形。     

制氢尾气二氧化碳回收装置设计

对制氢尾气二氧化碳的回收装置进行了简捷设计，流程分析，并对换热装置的换热量和传热面积给出了算法和有关数据。     

Asymptotic deformation and stress fields at the tip of a sharp notch in an elastic-plastic material

The singular elastic-plastic stress, strain and the displacement fields at the tip of a sharp notch for both plane stress and plane strain conditions are investigated analytically. The material is assumed to be governed by the deformation theory of plasticity with linear strain hardening characteristic. Since the elastic strain is retained in the analysis, the final strain and displacement fields can be separated into the elastic and the plastic parts. In the case with zero notch angle, the results reduce to the classical crack problem. The relationship of the amplitude of the near crack tip elastic-plastic field to the elastic far field is obtained. Both mode I and mode II cases are investigated. The mixed mode case is also discussed.     

埕东油田西区南块整体堵水中堵剂的研究和应用

本文介绍了埕东油田西区南块整体堵水中堵剂的研究和应用,包括对单液法铬冻胶的评价和改进、沉淀型双液法堵剂的筛选、将铬冻胶改为双液法堵剂、锆冻胶的引进和堵漏剂的使用等。在试验期间按堵水方案向区块投入上述各类堵剂11267m³,使区块的年含水量控制在2%以下,增产原油29600t。     

长输管道外防护层的选择与应用

文章介绍了目前国内外长输管道外防护技术的特点和防护层应用的现状,分析了常用防腐蚀材料的防腐蚀性能。指出在山区复杂地形条件下,应考虑环境条件和施工条件,并通过技术经济分析对管道外防腐蚀层进行合理选择。     

Determination of Boundary Shear Stress and Reynolds Shear Stress in Smooth Rectangular Channel Flows

A method for computing three-dimensional Reynolds shear stresses and boundary shear stress distribution in smooth rectangular channels is developed by applying an order of magnitude analysis to integrate the Reynolds equations. A simplified relationship between the lateral and vertical terms is hypothesized for which the Reynolds equations become solvable. This relationship has the form of a power law with an exponent of n = 1, 2, or infinity. The semiempirical equations for the boundary shear distribution and the distribution of Reynolds shear stresses are compared with measured data in open channels. The power-law exponent of 2 gave the best overall results while n=infinity gave good results near the boundary.     

射频放大器互调失真检测和载波抵消的研究

采用高功率射频信号内部互调失真的包络特性检测与比较技术,对射频功率带外信号进行检测和估计。设计用于高功率射频放大器前馈技术线性化的一个带外信号检测器。探讨如何进行射频载波抵消以及检测放大器互调失真信号。     

Protocol design for scalable and reliable group rekeying

We present the design and specification of a protocol for scalable and reliable group rekeying together with performance evaluation results. The protocol is based upon the use of key trees for secure groups and periodic batch rekeying. At the beginning of each rekey interval, the key server sends a rekey message to all users consisting of encrypted new keys (encryptions, in short) carried in a sequence of packets. We present a scheme for identifying keys, encryptions, and users, and a key assignment algorithm that ensures that the encryptions needed by a user are in the same packet. Our protocol provides reliable delivery of new keys to all users eventually. It also attempts to deliver new keys to all users with a high probability by the end of the rekey interval. For each rekey message, the protocol runs in two steps: a multicast step followed by a unicast step. Proactive forward error correction (FEC) multicast is used to reduce delivery latency. Our experiments show that a small FEC block size can be used to reduce encoding time at the server without increasing server bandwidth overhead. Early transition to unicast, after at most two multicast rounds, further reduces the worst-case delivery latency as well as user bandwidth requirement. The key server adaptively adjusts the proactivity factor based upon past feedback information; our experiments show that the number of NACKs after a multicast round can be effectively controlled around a target number. Throughout the protocol design, we strive to minimize processing and bandwidth requirements for both the key server and users.     

WC/Ni60真空熔烧涂层的组织结构特性

研究了真空熔烧WC Ni60复合涂层的显微组织结构特性 ,并测定了沿层深方向的显微硬度分布。研究结果表明 ,涂层与母材 4 5钢在界面处形成牢固的冶金结合 ,界面两侧的显微硬度呈连续性分布     

SOI热光4×4光开关阵列的研制

设计和制作了由5个2×2多模干涉马赫-曾德开关元组成的重排无阻塞型SOI 4×4热光开关阵列.阵列的最小和最大附加损耗分别为6.6和10.4dB,阵列的串扰为-12 ～-19.8dB,光开关阵列的开关速度小于30μs,单个开关元的功耗大约为330mW.