以创新的理念搞好热力学第二定律及其工程应用的教学

热力学第二定律是化工热力学核心教学内容之一,是工业装置用能标定和评价的基础,因此如何在本科热力学教学中说清热力学第二定律,掌握其工程应用方法显得尤为重要.作者根据多年的实际教学经验,从熵的基本概念、定性与定量表达方法出发,引申出熵产、理想功、损失功和有效能等基本热力学量,并将其应用于评价实际化工单元过程和装置组合.     

聚氨酯预聚体——可聚合乳化剂用于MMA乳液聚合动力学及聚合稳定性研究

将合成的聚氨酯预聚体可聚合乳化剂（APUA）用于甲基丙烯酸甲酯（MMA）乳液聚合体系中，研究了不同引发剂体系和乳化剂对聚合体系的聚合稳定性和动力学影响，并与SDS乳化剂进行了对照。结果显示，用油溶性引发剂（AIBN）和水溶性引发剂（K2S2O8）都能引发该体系的聚合反应，而且聚合速率和转化率都相当高。用AIBN作引发剂时，APUA和SDS两种乳化所对应的动力学曲线不同，但APUA比SDS的聚合速率大得多，其分别类似于微乳液聚合（miniemulsion)和微悬浮聚合（microsuspention)，且聚合过程中会产生一定的凝胶。当乳化剂APUA用量适合时，凝胶量极少，聚合体系是稳定的；而当用K2S2O8作引发剂时，两乳化剂对应动力学曲线相似，聚合过程不产生凝胶。但当引发剂用量较大并以APUA作乳化剂时，在聚合过程中会出现全部粒子突然粗化现象，而以SDS作乳化剂没有出现这一现象。     

银系无机抗菌剂的研究进展

本文综述了银系无机抗菌剂的抗菌机理，类型，制备工艺和应用现状及其抗菌性能评价的方法，探讨了银系无机抗菌剂的发展趋势。     

用三元共聚改性剂制PVC耐热管材

利用自行研制的三元共聚耐热改性剂与聚氯乙烯（PVC）共混制成耐热管材专用料，考察了共混体系中耐热改性剂、抗冲改性剂、填料及热稳定剂等各组分对材料拉伸强度、冲击强度和维卡软化点等综合性能的影响，同时对氯化聚氯乙烯和自制耐药改性剂的耐药和加工性能进行了比较，所研制的耐热改性剂与PVC混合后耐热效果较好，且易挤出加工。研制的耐热管材的维卡软化点可达100℃，比无规聚丙烯管材的维卡耐热性能要高。     

集成污水水质在线监测装置的研制

介绍基于流动注射分析法的集成污水水质监测仪的研制，该装置可自动检测水中的COD、NH3-N和pH值。     

Phase evolution and thermophysical properties of high-entropy RE2(Y0.2Yb0.2Nb0.2Ta0.2Ce0.2)2O7 oxides

Pursuing novel thermal barrier–coating materials with lower thermal conductivity and high-temperature stability can simultaneously improve the working efficiency and service temperature of a gas turbine. In this study, a series of high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ (RE = La, Nd, Sm, Gd, Dy, and Er) oxides were prepared though solid-state reaction. Through tuning the rare-earth cations, an order–disorder transition occurs from certain partially ordered weberite structure (C222₁) to disordered defective fluorite structure (Fm$\overline{3}$m). All the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides possess low thermal conductivity in the range of 0.91–1.34 W m⁻¹ K⁻¹ at room temperature, which can be attributed to increased lattice anharmonicity and disorder, resulting in additional phonon scattering. Herein, we proved that the incorporation of heterovalent cations at B-sites in high-entropy A₂B₂O₇ crystals is an effective strategy to reduce the thermal conductivity without compromising the decrease of oxygen vacancy. Moreover, the high-entropy RE₂(Y_0.2Yb_0.2Nb_0.2Ta_0.2Ce_0.2)₂O₇ oxides show the relatively higher thermal expansion coefficients of 10.3–10.7 × 10⁻⁶°C⁻¹ and excellent phase stability at elevated temperatures.     

向家坝坝基排水孔涌水量控制标准研究

为实时监控坝基的渗透安全性,向家坝水电工程采用了坝基扬压力和涌水量可实时调控的坝基渗流自动化控制系统。排水孔涌水量控制标准是系统运行的关键指标之一。在对左非3坝段坝基渗流实测资料分析的基础上,采用渗流数值分析方法全面研究了左非3坝基扬压力和水力梯度分布特点,获得了坝基排水孔出流控制涌水量与孔口控制压力之间变化关系。依据排水孔控制涌水量与控制孔口压力之间的函数关系,结合坝基扬压力设计值和控制水力坡降的要求,提出了向家坝坝基可控抽排系统涌水量标准,并成功应用于工程实践中,取得了预期效果。     

Conductive hybrid film from polyaniline and polyurethane-silica

In order to improve the mechanical performance and water resistance of water-borne conducting polyaniline film, conducting polyaniline/polyurethane-silica hybrid film was prepared in aqueous solution employing silanol-terminated polyurethane and methyltriethoxysilane as sol-gel precursors. The hybrid film showed surface resistivity of 10⁸ Ω even though the conducting polyaniline loading was only 10 wt% (or 1.5 wt% of polyaniline), and the mechanical performance as well as water resistance was significantly improved, making it suitable for antistatic application. Therefore, a practical route to water-borne processing of conducting polyaniline is disclosed.     

控制紫外波长合成维生素D3的研究

在合成维生素D3的过程中有多种光异构化产物．光异构产物取决于激发的紫外波长。束用一步光异构法。加入两种滤光液窄化禹压汞灯紫外波长在270hm-320hm．授维生素D3的转化率达到67％。     

泡沫塑料加工过程中的气泡成核理论(Ⅱ)——剪切能成核理论及其发展

介绍了剪切流场中泡沫塑料加工的气泡成核理论,分析评述了剪切流场中泡核拉伸模型、空穴成核模型对气泡成核机理的解释及存在的不足;对静态熔体中气泡成核过程进行了能量描述;介绍了最新的气泡成核中的剪切能成核理论,该理论较完善地解释了剪切流场中气泡成核过程;最后指出了气泡成核理论研究的发展方向。