中频反应溅射SiO2膜与直流溅射ITO膜的在线联镀

多数ITO透明导电玻璃生产线在实现SiO2膜与ITO膜在线联镀时，应用SiO2靶射频溅射沉积SiO2膜工艺和ITO靶直流溅射沉积ITO膜工艺，如果SiO2膜应用硅靶反应磁控溅射工艺，存在这种工艺是否可以与ITO靶直流溅射沉积ITO膜工艺在线联用以及如何实现联用的问题。作者对现有的生产线进行了改造设计、加工，做了大量实验、质谱分析和多项测试研究，成功地实现反应溅射SiO2膜与ITO膜在线联镀，做到SiO2镀膜室的工作状态的变化基本上不影响ITO镀膜室的工艺条件。     

液态混合有机标准物质研究

本研究采用重量法配制有机液态混合标样 ,并对配制方法、混合标样的均匀性、稳定性及影响不确定度的因素进行了研究 ,并用气相色谱法进行了比对分析。经稳定性监测 ,稳定度大于等于一年 ,不确定度小于± 2 %。     

WCDMA关键技术的研究

本主要讨论WCDMA的关键无线技术，并简要介绍了WCDMA移动通信系统中的智能技术。     

NiTi形状记忆合金激光气体氮化层表面特征

为改善NiTi合金的表面性能，利用2kW连续波Nd：YAG对NiTi合金进行激光气体氮化处理。采用SEM、TEM、XRD、XPS和纳米压痕研究了氮化层的显微组织及表面特征．结果表明：激光气体氮化可以在NiTi合金表面制备连续、无裂纹、厚度为2μm的TiN表面层，该表面层中基本不合有Ni元素且具有很高的硬度，其纳米压痕硬度为29．28GPa．     

中原边际小断块油田油气集输工艺配套技术探索

介绍了中原边际小断块油田开发建设以来几种油气集输工艺配套技术的成功应用，并从节能降耗、工艺合理匹配、提高系统效率等方面阐述了其他适于边际小断块油田油气集输工艺的配套技术。     

自蔓延高温合成TiNi多孔体合金

为了开发新型的生体材料，本文对自蔓延高温合成TiNi多孔体合金——人造骨材料进行了研究。以单质钛粉和镍粉作原料，在氩气保护条件下，采用预热点燃模式和热爆模式制得了不同形态的多孔TiNi形状记忆合金。采用SEM和XRD分析了样品的孔洞特征和相组成，测试了其力学性能，并研究了合成条件参数与样品表面形貌和孔隙状态之间的关系。结果表明，用SHS法制备TiNi多孔体合金是可行的。     

Time stepping schemes for coupled displacement and pore pressurē analysis

 The paper investigates the performance of various time stepping schemes for coupled displacement and pore pressure analysis. A number of alternative forms of the automatic time stepping method proposed by Sloan and Abbo (1999a) are also presented. These alternative schemes use different updates for the displacements and pore pressures and also adopt different starting conditions for the iterations. The automatic schemes are compared with an implicit θ-method, as well as an explicit method, through analysis of a variety of problems involving undrained loading, drained loading, and consolidation for Mohr-Coulomb and critical state models. As expected, the numerical results confirm that the explicit scheme is neither accurate nor robust. Although the implicit θ-method is accurate and fast, it fails to give a solution in a number of cases where the time step is large. The automatic schemes are shown to be accurate, fast and generally robust. Two of the automatic schemes proposed never fail to furnish a solution for the cases considered. In addition, all the automatic schemes are able to constrain the time-stepping (temporal integration) error in the displacements and pore pressures to lie near a prescribed tolerance, provided the iteration error tolerance is properly chosen. For complex soil models, it is important that the latter is set sufficiently small in order for the schemes to be able to constrain the time-stepping error to lie within a prescribed tolerance. Dedicated to the memory of Prof. Mike Crisfield, for his cheerfulness and cooperation as a colleague and friend over many years.     

一种LCD显示控制器IP核的设计与验证

介绍了一种用于LCD显示控制芯片的设计和验证过程。设计中利用Verilog语言对LCD显示控制器进行了描述和设计。并通过了仿真验证。本LCD控制器具有很好的可移植性，稍作改动便可应用于不同类型和应用场合的LCD显示控制。     

光电双基区晶体管(PDUBAT)的器件模型

本文在考虑了晶体管的小注入效应和大注入效应以及基区宽变效应等因素后,首次用近似和简化的数学表示式和相应的等效电路,描述了光电双基区晶体管(PDUBAT)负阻形成的机理并使负阻区和谷值区的理论计算和实验结果一致性很好.