从烟草悬浮细胞中分离液泡前体的方法研究

通过跟踪含有液泡前体特异标记物的组分, 利用细胞壁酶水解胞壁制造原生质体, 并用真针头挤压的方法裂解细胞, 用蔗糖密度梯度离心的方法分离液泡前体. 通过相差显微镜观察, 发现所分离的液泡前体保持完整的结构. 利用不同细胞器的标记物抗体进行免疫标记检测, 证明所纯化的液泡前体不含其他细胞器, 具有较高的纯度.     

溶胶-凝胶法制备Li（MoO4）2：Eu及表征

用溶胶-凝胶法制备了平均粒径为2～3μm的小颗粒、高亮度的Li（2-x）（MoO4）2：Eu系列钼酸盐红色荧光体。用XRD、SEM、粒度分析和分子荧光光度计对荧光体进行了表征和研究。常规的固相反应合成Li（2-x）（MoO4）2：Eux系列红色荧光粉需要在900℃以上的高温才能够形成均一的固溶体，而采用溶胶-凝胶法制取，在700℃就可以形成均一的单相Li（2-x）（MoO4）2：Eux，在750℃就可得到发光亮度最高的荧光体。其亮度是常规固相反应于900℃制得的荧光体的124％。采用溶胶-凝胶法制取Li（2-x）（MoO4）2：Eux系列，可以在相当宽的实验条件范围内得到小粒径、窄分布和高亮度的荧光体，具有良好的颗粒形貌。     

Finite-element analysis and experimental study on tensile fatigue behaviour of bitumen–stone adhesion

Tensile fatigue behaviours of bitumen–stone adhesion were investigated using a dynamic mechanics analyser under stress‐controlled mode at two temperatures of 5 and 25°C and various controlled‐stress levels. Failure characteristics including interfacial failure and cohesive failure were examined using image analysis of fracture surfaces. Finite‐element analysis on stress distributions was conducted under different temperatures, film thickness and interfacial bonding conditions. A Coulomb–Mohr like criterion in combination with shear and normal stresses is proposed to deal with the extreme thin adhesive layer, which can be further simplified into an adhesive zone without significant loss of accuracy for stress analysis.     

Involvement of zinc in intracellular oxidant/antioxidant balance

Methods to directly and indirectly identify the central sulcus are presented. In the axial plan, direct method is remarkable but obviously requires good visualization of the sulci in the central region. Sulci are readily visible in 90% of the cases on CT scans and in 50% of the cases on MRI. The method can also be applied when tumoral development erases the cerebral sulci by direct lecture of the controlateral rolandic region and right-left transfer. Within the precision limits of the method, it can be considered that the central sulci are symmetrical. The main signs are: the relative morphologies of the superior frontal sulcus and the precentral sulcus, the hook-shaped aspect of the middle part of the central sulcus, the internal end of the central sulcus projection anteriorly to the pars marginalis, the bifid nature of the internal end of the posterior central sulcus contouring the pars marginalis, and the lesser thickness of the posterior central gyrus compared with the precentral gyrus. The indirect method is less precise and is used when the direct method is unsuccessful. The central sulcus is identified on the sagittal images and, using the lateral view of the skull as a reference image, the topographic information is transferred to the axial images.     

眼球的自动定位

提出了一种由粗到细自动定位人脸的一个重要特征即眼球圆心的方法，该方法综合运用局部二值化，霍夫变换，像纱聚类，边缘提取等技术，对均匀或非均匀光照下拍摄或戴眼镜的照片都能获得很高的定位精度，适用于处理证件照。     

Eradication of Barrett''s mucosa with argon plasma coagulation and acid suppression: immediate and mid term results

Microcapsules are used for the formulation of drug controlled release and drug targeting dosage forms. Encapsulated hydrophobic drugs are often applied as their solutions in plant oils. The uptake of the oils in the complex coacervate microcapsules can be improved by the addition of surfactants. In this study, soybean, olive and peanut oils were chosen as the representatives of plant oils. The well characterized complex coacervation of gelatin and acacia has been used to produce the microcapsules. The amount of encapsulated oil has been determined gravimetrically. The encapsulation of the oils was high (75-80%). When the surfactants with HLB values from 1.8 to 6.7 were used, the amount of encapsulated oil was high (65-85%). A significant decrease of the oil content in the microcapsules was found when Tween 61 with HLB = 9.6 had been added into the mixture. No oil was found inside the microcapsules from the coacervate emulsion mixture containing Tween 81 (HLB = 10) and Tween 80 (HLB = 15), respectively. The results of the experiment confirm the dependence of hydrophobic substance encapsulation on the HLB published recently for Squalan.     

堆载预压法加固软基土体稳定性的有限元分析

堆载预压过程中,进行相应的稳定分析对于控制加载速率、确定加载高度是必须进行的一项工作,采用有限单元法对此进行了探讨,详细阐述了有限元理论分析边坡稳定的几种重要因素,并考虑分步堆载的特点,模拟堆载过程,具有一定的工程实际意义。     

降低氧化铝生产中熟料折合比的探讨

在氧化铝生产过程中，熟料折合比是烧结法一项重要的综合性指标，本文通过对熟料折合比的定义、计算公式的剖析，分析了生产过程中影响熟料折合比的主要因素，对有效降低熟料折合比的措施进行了探讨。     

清华屏蔽实验反应堆中子注量率能谱的调节和测量

叙述了采用多种屏蔽过滤方法,通过实验获得多种条件下的中子注量率能谱的调节和测量。     

基于PSOS的TM1300应用系统中的BSP研究

通过在应用软件与板级支持包BSP之间加一层库函数的方法较好地解决了应用程序与板级支持包函数间的通信问题，减少了板级支持包函数的维护复杂度，从而为嵌入式系统板级支持包的实现提供了一个有价值的思路。