PVC membrane potentiometric sensor based on 5-pyridino-2,8-dithia[9](2,9)-1,10-phenanthroline-phane for selective determination of neodymium(III)

Spectrofluorometric studies on the binding properties of 5-pyridino-2,8-dithia[9](2,9)-1,10-phenanthrolinephane (L) toward La3+, Sm3+, Gd3+, Yb3+, and Nd3+ in methanol solution revealed the occurrence of both 1:1 and 2:1 (ligand/metal) complexation with a stability order of Nd3+ > Yb3+ > Gd3+ > Sm3+ > La3+. Consequently, L was used as a suitable neutral ionophore for the preparation of a novel polymeric membrane-selective electrode for Nd3+ ion. The electrode exhibited a Nernstian response over a wide concentration range (1.0 x 10(-6)-1.0 x 10(-2) M) with a low limit of detection of 7.9 x 10(-7) M. The electrode possesses a fast response time of <5 s and can be used for at least 9 weeks without observing any considerable deviation. The proposed electrode revealed a very good selectivity for Nd3+ over a wide variety of alkali, alkaline earth, transition, and heavy metal ions, including members of the lanthanide family other than Nd3+. The potentiometric response of the electrode is independent of the pH of test solution in the pH range 4.0-6.5. The proposed electrode was successfully applied to the recovery of Nd3+ ion from tap water samples and, also, as an indicator electrode, in potentiometric titration of neodymium(III) ions.     

Comparison of antireflection surfaces based on two-dimensional binary gratings and thin-film coatings

A comparison of antireflection surfaces based on the two-dimensional binary gratings and thin-film coatings is presented. First, a two-dimensional hybrid binary grating is proposed and analyzed by use of a vector-based implementation of the rigorous coupled-wave analysis method. The optimum parameters of the structure are determined and the effects that changing them have on spectral characteristics of the structure are studied. Then this structure is compared with multilayer thin-film antireflection filters. These filters are designed by genetic algorithm and needle methods, which are powerful methods for multilayer filter design. The comparison results show that the sensitivity of the grating to changes in the incident wavelength is high. However, a reflectance of the order of 10(-3)% at the design wavelength can be achieved. The sensitivity of designed antireflection thin-film filters to wavelength changes is lower, however, and the minimum achievable reflectance is higher.     

Dynamic Simulation of Multibody Systems Using a New State-Time Methodology

This paper presents a new methodology demonstrating the feasibility and advantages of a state-time formulation for dynamic simulation of complex multibody systems which shows potential advantages for exploiting massively parallel computing resources. This formulation allows time to be discretized and parameterized so that it can be treated as a variable in a manner similar to the system state variables. As a consequence of such a state-time discretization scheme, the system of governing equations yields to a set of loosely coupled linear-quadratic algebraic equations that is well-suited in structure for some families of nonlinear algebraic equations solvers. The goal of this work is to develop efficient multibody dynamics algorithm that is extremely scalable and better able to fully exploit anticipated immensely parallel computing machines (tera flop, peta flop and beyond) made available to it.     

Study on automatic control of arc gap in robotic TIG welding

This paper presents a method for automatic control of arc length in tungsten inert gas (TIG) welding process using the arc voltage. By using this method, the role of operator in arc length control is played by an automatic control system based on a predefined arc voltage value for any special welding operation. A dynamic model for feed-rate mechanism and the relation between variations of arc length and voltage are described in details. Using a proportional-integral controller, variations of arc length in welding path is compensated with an automatic feed-rate mechanism in a normal direction to the welding path. By keeping the voltage constant during the process, a stable weld with higher quality and better appearance is obtained specially in welding of uneven surfaces. Theoretical and practical investigations show that the suggested method is able to control the TIG welding process successfully. Test results show that an accurate weld is obtained without the interference of the operator, and by comparing the predefined values of arc voltage with what is practically obtained, the welding gap is automatically adjusted.     

Development of an efficient stabiliser mixture for physical stability of nonfat unfizzy doogh

The effects of locust bean, carboxymethyl cellulose, a mixture of locust bean and carboxymethyl cellulose and Persian gum on different properties of nonfat doogh were studied over a period of 28 days. The results showed that samples containing a mixture of locust bean and carboxymethyl cellulose had the highest stability. Furthermore, the rheological behaviour of the doogh changed from Newtonian to pseudoplastic. Better sensory acceptability was shown for the treatments containing a mixture of locust bean gum and carboxymethyl cellulose. In general, it was shown that a mixture of locust bean and carboxymethyl cellulose could be of practical use in the industrial production of nonfat doogh.     

Polyurethane-SAPO-34 mixed matrix membrane for CO2/CH4 and CO2/N2 separation

SAPO-34 nanocrystals (inorganic filler) were incorporated in polyurethane membranes and the permeation properties of CO₂, CH_4, and N₂ gases were explored. In this regard, the synthesized PU-SAPO-34 mixed matrix membranes (MMMs) were characterized via SEM, AFM, TGA, XRD and FTIR analyses. Gas permeation properties of PU-SAPO-34 MMMs with SAPO-34 contents of 5 wt%, 10 wt% and 20 wt% were investigated. The permeation results revealed that the presence of 20 wt% SAPO-34 resulted in 4.45%, 18.24% and 40.2% reductions in permeability of CO_2, CH_4, and N₂, respectively, as compared to the permeability of neat polyurethane membrane. Also, the findings showed that at the pressure of 1.2 MPa, the incorporation of 20 wt% SAPO-34 into the polyurethane membranes enhanced the selectivity of CO₂/CH₄ and CO₂/N₂, 14.43 and 37.46%, respectively. In this research, PU containing 20 wt% SAPO-34 showed the best separation performance. For the first time, polynomial regression (PR) as a simple yet accurate tool yielded a mathematical equation for the prediction of permeabilities with high accuracy (R² > 99%).     

Cube-octameric silsesquioxane (POSS)-capped magnetic iron oxide nanoparticles for the efficient removal of methylene blue

Octavinyl polyhedral oligomeric silsesquioxane (POSS) was polymerized on the surface of Fe3O4 nanoparticles (NPs) and then the NPs were functionalized with carboxylic acid groups using thiol-ene click reactions with thioglycolic acid.The as-prepared Fe3O4@POSS-COOH magnetic hybrid NPs had mesoporous structures with an average particle diameter of 15 nm and a relatively high specific surface area of 447 m^2· g^-1.Experimental results showed that 4 mg of Fe3O4@POSS-COOH NPs efficiently adsorbed and removed methylene blue from water at 5 min.This is due to the presence of both carboxylic acid and pendant vinyl groups on the Fe3O4@POSS-COOH NPs.These NPs could be easily withdrawn from water within a few seconds under moderate magnetic field and showed high stability in acid and alkaline aqueous mediums.     

The application of internet of things in healthcare: a systematic literature review and classification

Universal Access in the Information Society - The Internet of Things (IoT) is an ecosystem that integrates physical objects, software and hardware to interact with each other. Aging of population,...     

Analytical study of surface wave multiple refraction in boundary of a scalar impedance surface with a tensor impedance surface

In this paper, the multiple refraction phenomenon is investigated on the boundary of a scalar impedance surface (SIS) and a tensor impedance surface (TIS). When a surface wave (SW) propagates on the SIS and radiates to the boundary of the TIS, the propagation direction of it is changed and the refraction phenomenon is accrued. The method that is proposed in this paper can predict the multiple refraction for the SW. Moreover, another analytical method is introduced for designing the proposed structure which the double refraction (DR) occurs at arbitrary angles on it. Using it, a sample of the structure is designed by printed circuits in 15.2GHz and the results are verified by the full‐wave simulation and measurement. The results are shown that in the structure, DR is occurred in 2° and 22° as predicted. The proposed method can provide many applications such as design of SW power dividers based on the TISs, impedance surface based waveguides, holographic antennas, and feeding of array antennas.