On the use of a spectrum-based model for linear viscoelastic materials

A new spectrum-based model for describing the behavior of time-dependent materials is presented. In this paper, unlike most prior modeling techniques, the time-dependent response of viscoelastic materials is not expressed through the use of series. Instead, certain criteria have been imposed to select a spectrum function that has the potential of describing a wide range of material behavior. Another consequence of choosing the spectrum function of the type used in this paper is to have a few closed form analytic solutions in the theory of linear viscoelasticity. The Laplace transform technique is used to obtain the necessary formulae for viscoelastic Lame' functions, relaxation and bulk moduli, creep bulk and shear compliance, as well as Poisson's ratio. By using the Elastic–Viscoelastic Correspondence Principle (EVCP), material constants appearing in the proposed model are obtained by comparing the experimental data with the solution of the integral equation for a simple tensile test. The resulting viscoelastic functions describe the material properties which can then be used to express the behavior of a material in other loading configurations. The model's potential is demonstrated and its limitations are discussed.     

The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets

Self-piercing riveting as an alternative joining method to spot-welding has attracted considerable interest from the automotive industry and has been widely used in aluminium intensive vehicles. Pressing and stamping are important processes in automotive production and result in additional straining on the vehicle body sheet material. It is therefore important to have knowledge of the effect of sheet pre-straining on the quality of the self-piercing riveted joints and on the mechanical behaviour of the riveted aluminium alloy sheets. This paper reports the influence of sheet pre-straining on the static and fatigue behaviour of self-piercing riveted aluminium alloy sheet. Wrought aluminium alloy sheet, NG5754 with a nominal thickness value of 2 mm was used to obtain pre-strained NG5754 sheets with pre-straining levels of 3%, 5% and 10%. Pairs of pre-strained NG5754 sheets were joined to create single-riveted lap joints which subsequently underwent lap-shear and fatigue testing. Microscopic inspection showed that the joint quality was satisfactory despite the increasing sheet straining levels. The results showed that by increasing the pre-straining level up to 10%, the shear and fatigue strength also increased. The rate of increase of the static and fatigue strength differed as the pre-straining levels varied.     

Task Demands Control Acquisition and Storage of Visual Information.

Attention and working memory limitations set strict limits on visual representations, yet researchers have little appreciation of how these limits constrain the acquisition of information in ongoing visually guided behavior. Subjects performed a brick sorting task in a virtual environment. A change was made to 1 of the features of the brick being held on about 10% of trials. Rates of change detection for feature changes were generally low and depended on the pick-up and put-down relevance of the feature to the sorting task. Subjects' sorting decision suggests that changes may be missed because of a failure to update the changed feature. The authors also explore how hand and eye behavior are coordinated for strategic acquisition and storage of visual information throughout the task. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Tapered rib adiabatic following fiber couplers in etched GaAsmaterials for monolithic spot-size transformation

Design details and demonstration data are presented for an (Al,Ga)As monolithic tapered rib waveguide achieving modal spot-size transformation. The tapered rib adiabatic following fiber coupler structure (TRAFFIC) achieves two-dimensional (2-D) expansion of the output optical mode of single-transverse-mode semiconductor waveguide modulators and lasers using a one-dimensional (1-D) taper between noncritical initial and final taper widths which are compatible with optical lithographic techniques. Measurements are presented of total mode expansion losses between ~1.5-2.0 dB and semiconductor to single-mode-fiber waveguide coupling losses of ~0.5-1.0 dB for doped pin optical-modulator-type waveguides using the TRAFFIC waveguide. A semiconductor laser with a TRAFFIC tapered-rib mode-expansion section and measured coupling loss between the laser output and single-mode fiber of only 0.9 dB is described. Finally, a TRAFFIC Spot-size transformer for undoped waveguide modulators with total mode expansion losses of 1.84 dB and excellent modal behavior at 1.32-μm wavelength is presented. The TRAFFiC structure is particularly well suited for integration with both active and passive etched rib waveguide devices. Fabrication is relatively simple, requiring only patterning and etching of the tapered waveguide and uniform-width outer mesa waveguide without any epitaxial regrowth     

Corticosterone Influences on Mammalian Neonatal Sensitive-Period Learning.

Infant rats exhibit sensitive-period odor learning characterized by olfactory bulb neural changes and odor preference acquisitions critical for survival. This sensitive period is coincident with low endogenous corticosterone (CORT) levels and stress hyporesponsivity. The authors hypothesized that low corticosterone levels modulate sensitive-period learning. They assessed the effects of manipulating CORT levels by increasing and removing CORT during (Postnatal Day 8) and after (Postnatal Day 12) the sensitive period. Results show that (a) exogenous CORT prematurely ends sensitive-period odor-shock-induced preferences; (b) adrenalectomy developmentally extends the sensitive period as indicated by odor-shock-induced odor-preference learning in older pups, whereas CORT replacement can reinstate fear learning; and (c) CORT manipulation modulates olfactory bulb correlates of sensitive-period odor learning in a manner consistent with behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Memory and Emotions for the September 11, 2001, Terrorist Attacks in Patients With Alzheimer's Disease, Patients With Mild Cognitive Impairment, and Healthy Older Adults.

National traumatic events can produce extremely vivid memories. Using a questionnaire administered during telephone interviews, the authors investigated emotional responses to, and memory for. the September 11, 2001, terrorist attacks in patients with Alzheimer's disease (AD), patients with mild cognitive impairment (MCI), and healthy older adults in the initial weeks following the event and again 3-4 months later. There were several notable findings. First, patients with AD showed less memory than patients with MCI and older adults. Second, patients with AD, but not patients with MCI or older adults, appeared to retain more memory for personal versus factual information. Third, patients with AD and older adults did not differ in the intensity of their reported emotional responses to the attacks, whereas patients with MCI reported relatively less intense emotional responses. Last, distortions of memory for personal information were frequent for all participants but were more common in patients with AD. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Examination of the Response of Regularly Packed Specimens of Spherical Particles Using Physical Tests and Discrete Element Simulations

Significant insight into the response of granular materials can be gained by coupling accurately controlled physical tests with complementary discrete element simulations. This paper discusses a series of triaxial and plane strain laboratory compression tests on steel spheres with face-centered-cubic and rhombic packings, as well as discrete element simulations of these tests. The tests were performed on specimens of uniform-sized steel balls and on specimens of steel balls with specified distributions of ball diameters. The packing configurations are ideal and differ considerably from real sand specimens, however, studies of such idealized granular materials can yield considerable insight into the response of granular materials and the capability of discrete element simulations to capture the response. The differences in response for the two packing configurations considered illustrate the importance of fabric. The numerical simulations captured the observed laboratory response well if the particle configurations, particle sizes, and boundary conditions were accurately represented. However, the postpeak response is more difficult to capture, and it is shown to be sensitive to the coefficient of friction assumed along the specimen boundaries. The simulations of the tests on the nonuniform-sized specimens demonstrated a clear correlation between strength and coordination number.     

Preparation of dense mixed electron- and proton-conducting ceramic composite materials using solid-state reactive sintering: BaCe0.8Y0.1M0.1O3−δ–Ce0.8Y0.1M0.1O2−δ (M=Y,Yb, Er,Eu)

Mixed electronic and protonic conductor materials were prepared using BaCe_0.8Y_0.1M_0.1O_3?δ (BCYM) as the protonic conductive phase and Ce_0.8Y_0.1M_0.1O_2?δ (MYDC) as the electronic conductive phase (in reducing atmosphere), with M=Y, Yb, Er, Eu. Dense specimens of these ceramic/ceramic composite materials (cercers) were prepared by solid-state reactive sintering: all the precursors for BCYM and MYDC were mixed, pelletized, and fired without any pre-calcination step of the individual ceramic phases. The X-ray diffraction patterns revealed the presence of the two desired phases. The study of the lattice parameters showed that the Y and M co-dopants were fairly well distributed between the perovskite phase BCYM and the fluorite phase MYDC. This interesting discovery is of importance for the preparation of two-phase ceramic materials. In addition to the structural study, the samples were analyzed by scanning electron microscopy and were found to be free of any undesirable phases. The two ceramic phases could easily be distinguished using the back-scattered electron mode, with grains between 10 and 30 microns. Energy dispersive X-ray spectroscopy confirmed the distribution of the co-dopant between the two phases.     

Risk-based approach to developing a national residue sampling plan for testing under European Union regulation for veterinary medicinal products and coccidiostat feed additives in domestic animal production

A ranking system for veterinary medicinal products and coccidiostat feed additives has been developed as a tool to be applied in a risk-based approach to the residue testing programme for foods of animal origin in the Irish National Residue Control Plan (NRCP). Three characteristics of substances that may occur as residues in food are included in the developed risk ranking system: Potency, as measured by the acceptable daily intake assigned by the European Medicines Agency Committee for Medicinal Products for Veterinary Use, to each substance; Usage, as measured by the three factors of Number of Doses, use on Individual animals or for Group treatment, and Withdrawal Period; and Residue Occurrence, as measured by the number of Non-Compliant Samples in the NRCP. For both Number of Doses and Non-Compliant Samples, data for the 5-year period 2008–12 have been used. The risk ranking system for substances was developed for beef cattle, sheep and goats, pigs, chickens and dairy cattle using a scoring system applied to the various parameters described above to give an overall score based on the following equation: Potency × Usage (Number of Doses + Individual/Group Use + Withdrawal Period) × Residue Occurrence. Applying this risk ranking system, the following substances are ranked very highly: antimicrobials such as amoxicillin (for all species except pigs), marbofloxacillin (for beef cattle), oxytetracycline (for all species except chickens), sulfadiazine with trimethoprim (for pigs and chickens) and tilmicosin (for chickens); antiparasitic drugs, such as the benzimidazoles triclabendazole (for beef and dairy cattle), fenbendazole/oxfendazole (for sheep/goats and dairy cattle) and albendazole (for dairy cattle), the avermectin ivermectin (for beef cattle), and anti-fluke drugs closantel and rafoxanide (for sheep/goats); the anticoccidials monensin, narasin, nicarbazin and toltrazuril (for chickens). The risk ranking system described is a relatively simple system designed to provide a reliable basis for selecting the veterinary medicinal products and coccidiostat feed additives that might be prioritised for residue testing.