厚膜永磁阵列微致动器的磁路研究

研究了厚膜永磁阵列微致动器中的磁场分布，并研究了永磁阵列单元几何尺寸对微致动器电磁力的影响。结果表明，厚膜永磁阵列单元高宽比和磁体单元间隔对微致动器电磁力影响较大磁徕单元高宽比为0．7是一个比较合适的尺寸。     

高温氨化合成GaN微晶

分别利用Ga2O3粉末和Ga2O3凝胶作为Ga源,采用NH3为N源,在950℃下,分别将两种反应物与流动的NH3反应20 min合成了GaN微晶。用X射线衍射(XRD)、扫描电子显微镜(SEM)、选择区电子衍射(SAED)对微晶进行结构、形貌的分析,特别是对两种不同途径合成GaN微晶的XRD进行了分析比较。结果表明,当Ga源温度为950℃时两种不同的合成途径均可得到六方纤锌矿结构的GaN单晶颗粒,在氮化温度为850℃和900℃时,利用Ga2O3粉末作为Ga源,仅有少量的Ga2O3转变为GaN;而采用Ga2O3凝胶作为Ga源,在相同的温度下,大部分凝胶经过高温氨化反应均可转化为GaN。     

测量光纤放大器小信号增益谱的一种简便方法

提出了一种用小功率宽带光源较精确测量光纤放大器小信号增益谱的方法。数值模拟表明 ,该方法是完全可行的 ,并且实验结果与数值模拟结果一致。该方法具有简便、易操作的特点。     

Performance analysis of OFDMA uplink systems with symbol timing misalignment

This letter presents our investigation for the effect of symbol timing errors in orthogonal frequency-division multiple access (OFDMA) uplink systems. We express the symbol timing errors between users as the symbol timing misalignments with respect to the desired user. Then, we derive an explicit expression of the signal-to-noise ratio (SNR) as a function of the maximum value of the symbol timing misalignments. Analyses and simulation results show that, to achieve an SNR of 20 dB, the maximum value of the symbol timing misalignments must be less than the cyclic prefix duration plus 6.25% of the useful symbol duration. Based on the resulting SNR degradation, we evaluate the SNR gain with guard subcarriers in order to mitigate the effect of the symbol timing misalignments.     

基于有限状态的全周期序列混沌映射的研究

在有限长度的数字计算机中，混沌迭代序列是一个有限周期序列，其相关性能远远低于理想序列。基于skew tent映射，提出一种离散化的有限状态混沌映射，它允许精确的数值计算，没有舍入误差，通过选择合适的参数，映射能产生全周期长度的序列。仿真实验表明，归一化的序列平均周期对计算机精度不敏感，生成的二进制序列具有良好的相关性能。     

试论循环水装置的经济性及其成本分析

通过对循环水装置的投资和成本分析，阐述了建设该装置的经济性和社会意义。     

Estimating and reducing the memory requirements of signal processing codes for embedded systems

Most embedded systems have limited amount of memory. In contrast, the memory requirements of the digital signal processing (DSP) and video processing codes (in nested loops, in particular) running on embedded systems is significant. This paper addresses the problem of estimating and reducing the amount of memory needed for transfers of data in embedded systems. First, the problem of estimating the region associated with a statement or the set of elements referenced by a statement during the execution of nested loops is analyzed. For a fixed execution ordering, a quantitative analysis of the number of elements referenced is presented; exact expressions for uniformly generated references and a close upper and lower bound for nonuniformly generated references are derived. Second, in addition to presenting an algorithm that computes the total memory required, this paper also discusses the effect of transformations (that change the execution ordering) on the lifetimes of array variables, i.e., the time between the first and last accesses to a given array location. The term maximum window size is introduced, and quantitative expressions are derived to compute the maximum window size. A detailed analysis of the effect of unimodular transformations on data locality, including the calculation of the maximum window size, is presented.     

多波段红外目标跟踪与辐射特性测量系统

介绍了一种对动态目标进行红外成像跟踪与辐射特性测量的系统。该系统采用大口径红外成像镜头，图像信号经放大、A／D转换和图像非均匀性校正，输出与目标辐射量成正比关系的数字图像信号。红外成像跟踪采用FPGA结合软件处理方法实现对目标的实时自动识别，进行形心、边缘与相关跟踪的计算。红外辐射特性测量采用基于PCI总线的高速图像采集板进行实时图像采集与显示。红外定标建立输出信号和标准黑体绝对辐射量的关系曲线，将原始的图像灰度数据换算为辐射通量密度。经外场试验证明该系统稳定可靠。     

MCM-41掺杂Cr对正己醇催化活性的影响

合成了掺杂不同Cr含量的Cr-MCM-41分子筛,采用XRD、FT-IR等手段对催化剂进行了表征,并考察了它们对正己醇催化氧化性能的影响.结果表明,掺杂适量的Cr,可使正己醇的转化率达到48%,正己酸的选择性达到83%.Cr的掺杂量、反应温度、催化剂用量等条件对该催化反应均有一定影响.适量杂原子的掺杂不会破坏MCM-41分子筛的结构.     

MIP汽油性质及其深度加氢脱硫性能的研究

分析了我国典型炼油厂FCC汽油硫含量和烯烃含量的变化情况,将MIP汽油[采用多产异构烷烃FCC工艺(Maximizing Iso-Paraffins)生产的汽油],与常规FCC汽油的性质进行了比较,介绍了用OCT-M技术(FCC汽油选择性加氢脱硫技术)对MIP汽油进行深度加氢脱硫的研究情况,包括加工方案的比较、反应压力的影响.结果表明,OCT-M FCC汽油选择性加氢脱硫技术可以将烯烃体积分数为31%的MIP汽油的硫质量分数由664 μg/g降低到50 μg/g以下,研究法辛烷值损失0.7～1.7,OCT-M技术能够为我国炼油厂由MIP汽油生产符合欧Ⅳ标准的清洁汽油提供灵活、经济的技术解决方案.