In Silico Analysis and Experimental Validation of Active Compounds from Cichorium intybus L. Ameliorating Liver Injury

This study aimed at investigating the possible mechanisms of hepatic protective activity of Cichorium intybus L. (chicory) in acute liver injury. Pathological observation, reactive oxygen species (ROS) detection and measurements of biochemical indexes on mouse models proved hepatic protective effect of Cichorium intybus L. Identification of active compounds in Cichorium intybus L. was executed through several methods including ultra performance liquid chromatography/time of flight mass spectrometry (UPLC-TOF-MS). Similarity ensemble approach (SEA) docking, molecular modeling, molecular docking, and molecular dynamics (MD) simulation were applied in this study to explore possible mechanisms of the hepato-protective potential of Cichorium intybus L. We then analyzed the chemical composition of Cichorium intybus L., and found their key targets. Furthermore, in vitro cytological examination and western blot were used for validating the efficacy of the selected compounds. In silico analysis and western blot together demonstrated that selected compound 10 in Cichorium intybus L. targeted Akt-1 in hepatocytes. Besides, compound 13 targeted both caspase-1 and Akt-1. These small compounds may ameliorate liver injury by acting on their targets, which are related to apoptosis or autophagy. The conclusions above may shed light on the complex molecular mechanisms of Cichorium intybus L. acting on hepatocytes and ameliorating liver injury.     

磷酸高效分解磷矿实验研究

为改进湿法磷酸生产工艺,提高副产石膏的品质,减少湿法磷酸固体副产物磷石膏堆存产生的经济和环保压力,进行了磷酸分解磷矿制磷酸的实验研究。采用贵州某磷矿为主要原料,研究了湿法磷酸预分解磷矿的反应条件。通过单因素实验确定了湿法磷酸分解磷矿最优反应条件：反应温度为75 ℃,磷酸与磷矿的质量比（液固比）为9,反应时间为3 h,磷酸质量分数为30%（以五氧化二磷计）。在此条件下,磷矿的分解率为98.62%。     

基于分形插值的改进趋势面拟合法在地面沉降中的应用

针对区域地面沉降监测点数量有限、分布不均的情况,一般采用空间插值的手段建立表面拟合模型来解决。基于分形插值,采用随机选择迭代函数的思想对传统的趋势面拟合法作出改进,改进后拟合优度系数提高0.03,达到0.995,且改进前后的拟合结果符合显著性检验的要求。实验结果表明:改进前后趋势面拟合法拟合结果满足地面沉降监测的精度要求,改进后方法的拟合优度更高,对现实地面沉降量变化的描绘更加真实,可为沉降灾害评价工作提供更准确的依据。     

多晶硅锭中硬质点分析及控制研究

以多晶硅锭中硬质点为研究对象,通过实验研究和数值模拟的方法,对多晶硅锭中硬质点进行形貌和成分分析,并提出改善控制方法。研究结果表明硅锭中部的硬质点较细小,主要由SiC组成;硅锭头部的硬质点较粗大,主要由SiC和Si3N4组成,还有少量O的存在。进一步研究发现多晶硅定向凝固铸锭炉的热场结构对于多晶硅锭硬质点形成有直接影响,通过改进热场结构,优化晶体生长界面,显著减少了铸锭中硬质点的数量。     

基于统计软件R的安全壳泄漏率试验数据有效性分析

安全壳泄漏率计算过程中，最重要的环节是以不同时刻测量数据对时间进行线性回归分析。对回归的显著性检验以及方差分析是评价试验结果有效性的重要手段。本文基于统计软件R对某电厂调试阶段安全壳泄漏率试验的数据进行分析，通过对线性回归模型的独立性、正态性和异方差性检验以及极端样本点的剔除等方式，探讨泄漏率计算前的回归诊断对计算结果可靠性的影响。通过回归诊断的实例分析发现，在安全壳泄漏率计算的数据样本中，可能存在自相关、非正态和异方差性等问题影响回归结果，进而影响泄漏率的最终结果。因此，在计算泄漏率结果时，须通过回归诊断方法评价数据的有效性，对不能通过检验的样本应通过适当方法对最终结果进行修正。      

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

海工磨细矿渣混凝土的冻渗性与孔结构研究

在天然海水侵蚀和冻融循环作用下,与普通混凝土对比,对掺加磨细矿渣(GGBS)海工混凝土的抗冻性和抗氯离子渗透性的耦合性能(简称冻渗性)以及孔结构的细观性能进行了研究.用R值代表混凝土冻渗性指标进行分析讨论,结果表明:掺加磨细矿渣的混凝土,无论掺加引气剂与否,水胶比增大,R值逐渐减小;不掺引气剂,矿粉掺量增大,R值减小;掺加引气剂,矿粉掺量增大,R值增大;引气剂掺量增大,R值增大,但引气剂掺量超过一定极限,R值增长不明显;抗压强度等级在40～60 MPa范围内,其强度值与R值没有明显的规律性.MIP结果表明:掺加矿粉和引气剂的海工混凝土经过冻渗后,无害孔和少害孔的数量较多;R值与最可几孔径大小有明显的反比关系.