多传感器检测中的数据溶合技术

多传感器检测是使用多种(或多个)传感器对同一被测对象进行广泛的测量。应用多传感器检测技术和多传感器数据溶合技术对车削加工中的零件外圆尺寸检测进行了实验研究,结果表明,多传感器检测技术能够满足现代检测技术对信息的精确要求,使得检测监控系统更加准确、可靠。     

添加剂及硫元素对ZL108合金中铁相形态的影响

在含铁为１２％的ＺＬ１０８合金中，加入５％的以锰、铬、稀土为基本成分的添加剂时，合金中针状、片状的铁相变为团球状、块状及梅花状。单独加硫时，铁相呈短杆状。先加入３％的添加剂再加硫，则铁相变为非常细小的团球状、块状，根据ＧＢ３５０８－８３的规定，铁相形态可达一级     

高频脉冲微束等离子电弧温度场的测试及分析

本文首次采用单波长激光干涉技术，对恒定直流和高频脉冲电流微束等离子电弧温度场进行了测试，并做了分析比较。以电弧温度分布为基础分析了高频脉冲电流微束等离子电弧收缩、稳定的原因。     

桐油改性酚醛树脂的结构及固化过程的研究

通过桐油与苯酚在酸性催化剂存在下反应，然后再在碱性催化剂存在与甲醛反应制得了一种热固性桐油改性酚醛树脂。利用红外光谱，差示扫描量热法分析技术对改性树脂的结构及固化反应过程进行了研究。     

Use of the time constant to detect corrosion speed in reinforced concrete structures

The relatively simple to measure ‘time constant’ is presented as an index for characterizing the level of corrosion experienced by steel in concrete. This communication, largely in the form of a technical note, explicitly illustrates that the time constant determined from electrochemical testing has significant merit for monitoring corrosion of steel in concrete, and appears to be insensitive to the area of electrode being probed. In this work, the time constant, κ, is determined following a galvanostatic excitation signal, revealing a good correlation between the value of κ and corrosion status across specimens of widely varying geometry. Although this notion has been suggested in the past, this work presents both a survey and consolidated review to indicate the utility of the parameter as an index to corrosion rate on-site.     

微计算机控制的造波系统

本文所述系统可在水池中产生单一频率规则波、周期不规则波及"随机波",用于海洋、造 船工程的模型试验,采用频域迭代法和成型滤波器法来产生模拟海浪.尽管这一控制系统是 专为产生模拟海浪而设计的,但其控制方案也可直接用于其他测试技术领域,以产生"随机" 信号.     

Performance of miniaturized direct methanol fuel cell (DMFC) devices using micropump for fuel delivery

A fuel cell is a device that can convert chemical energy into electricity directly. Among various types of fuel cells, both polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs) can work at low temperature (<80 °C). Therefore, they can be used to supply power for commercial portable electronics such as laptop computers, digital cameras, PDAs and cell phones. The focus of this paper is to investigate the performance of a miniaturized DMFC device using a micropump to deliver fuel. The core of this micropump is a piezoelectric ring-type bending actuator and the associated nozzle/diffuser for directing fuel flow. Based on the experimental measurements, it is found that the performance of the fuel cell can be significantly improved if enough fuel flow is induced by the micropump at anode. Three factors may contribute to the performance enhancement including replenishment of methanol, decrease of diffusion resistance and removal of carbon dioxide. In comparison with conventional mini pumps, the size of the piezoelectric micropump is much smaller and the energy consumption is much lower. Thus, it is very viable and effective to use a piezoelectric valveless micropump for fuel delivery in miniaturized DMFC power systems.