Chemically modified organic/inorganic nanoporous composite particles for the adsorption of reactive black 5 from aqueous solution

In the present work, we report a chemically modified polyacrylamide/silica nanoporous composite adsorbent for the removal of reactive black 5 (RB5) azo dye from aqueous solutions. The composite adsorbent was synthesized in a packed bed and modified by ethylenediamine (EDA). The adsorbent was characterized by Fourier transformation infrared (FT-IR), thermogravimetric analysis (TGA), thermoporometry, Brunauer, Emmett and Teller (BET) method and scanning electron microscopy (SEM). Mechanical stability of the adsorbent was examined in a packed bed by following the back-pressure of the column. Pore diameter of the composite adsorbent in dry and wet states was estimated to be about 18.71 nm and 12.61 nm, respectively. Adsorption experiments were performed in batch mode and effect of various operational parameters on the adsorption capability of the adsorbent was studied systematically. The maximum adsorption capacity of the modified composites was found to be 454.5 mg RB5/g of adsorbent. The equilibrium data were analyzed by Langmuir, Freundlich, Sips, BET and Redlich–Peterson isotherm models and found to fit well to the BET isotherm. The data kinetically followed the pseudo-second-order model. High adsorption capacity, fast removal mechanism, and good mechanical stability are three advantages of the presented composite for the removal of RB5.     

Three Ln(III)-2,3,5-trichlorobenzoate coordination polymers (Ln = Tb,Ho and Er): Syntheses,structures and magnetic properties

Three novel lanthanide polymers, [Ln(III)(L)₃EtOH]_n (Ln = Tb(1), Ho(2), Er(3), HL = 2,3,5-trichlorobenzoic acid), have been solvothermal synthesized and characterized by single-crystal X-ray diffraction, infrared spectroscopy and element analyses. The three polymers crystallize in triclinic space group P-1. The Ln(III) ions are in turn bridged by double and quadruple carboxylate of L⁻ ligands to form one-dimensional (1D) chains. Magnetic studies reveal that polymer 1 demonstrates dominant ferromagnetic behavior, polymer 2 shows antiferromagnetic behavior, and polymer 3 present spin-canting behavior.     

扭臂式静电微驱动器的pulli-n现象分析

从扭臂式微驱动器模型出发,分析了器件在静电驱动条件下pulli-n现象的产生条件,并给出公式化结果。讨论了器件的几何结构参数对于pulli-n现象的影响,并对具体结构的器件给出了pulli-n角度和pulli-n电压等方面的分析结果。对于特定的扭臂结构,pulli-n角度为悬臂梁最大扭转角度的44.04%,且与扭臂的结构参数无关。     

Modelling of heat transfer in an infiltrated granular bed in view of the difference of phase temperatures

Physically substantiated boundary conditions for problems of heat transfer in infiltrated granular beds based on the two-temperature model which allow for the absence of interphase heat transfer on boundaries are formulated. It is shown that classical Dankwerts conditions would be applicable for gas. The problem of porous cooling at the boundary conditions of the 2nd and 3rd kind on the outer boundary is solved in a new formulation.     

一个面向语义的解释器自动生成技术

本文给出从指称语义自动生成解释器后端的一种技术.解释器被表示成PASCAL_like形式.     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.     

Experiments and simulations of the mechanical performance of repaired panels

Firstly, the compress experiment is undertaken to investigate the efficiency of repaired panels in this paper, and then modeling of the mechanical behavior of the repaired composite panel under compressive static load is conducted by using of the finite element method. The effect of geometric non-linearity on the stress–strain response is considered in the numeric analysis. Fatherly, the user material subroutine (UMAT) is integrated with the ABAQUS package with the geometric non-linearity effect for studying the damage initiation and its progression in the composite structure, and quadrilateral, linear, thick shell elements (S8R) are adopted. Finally, the predicted strain distribution, damage evolution and strength of the laminate are compared with the test results.     

水电站坝下尾水渠集鱼流场模拟研究

为减缓大坝阻隔对鱼类洄游的不利影响,水电工程需要建设有效的过鱼设施疏通其洄游通道。高寒区高坝大库工程过鱼设施建设是一个极其复杂的技术问题,目前国内类似工程尚无成功运用经验。实际过鱼设施内流场条件十分复杂,会产生不利于鱼类上溯的水流形态。基于此原因,对某水电站工程坝下尾水流场进行了数值模拟。研究表明,在机组运行时,电站尾水渠左右两侧发电尾水主流的边缘是明显具有流速梯度分布的区域,符合鱼类聚集的水流特征,具备布置鱼道进口条件。这样可根据尾水位的变化开启两侧不同进口诱鱼,且在机组停运时,可开启左侧进口诱鱼。     

太阳辐照绝对辐射计的精密温度控制系统设计

为了提高太阳辐照绝对辐射计(SIARs)的测量精度,消除温度变化对SIARs测量精度的影响,研究设计了精密温度控制系统,对SIARs进行恒温控制;通过对铂电阻温度传感器自热效应的弱化,提高了温度测量的精度;提出了一种新的复合PID控制算法,该复合控制算法使系统获得良好的动态和稳态性能;使用密闭的高低温箱来模拟星上温度条件对系统进行了实验测试,实验数据表明,系统控制精度在0.1℃以内,可为SIARs工作提供稳定的温度环境。