Adaptive Boolean Logic Using Ferroelectrics Capacitors as Basic Units of Artificial Neurons and Its Implementation in FPGA

In this work we propose the implementation of boolean logic through artificial neurons with Ferroelectric Capacitor (FeCapacitor) as its basic unit on a reconfigurable hardware platform. Two neurons were implemented: the Perceptron and the Spiking Neuron model. Both neurons use the phenomenon of the hysteresis loop as an activation function and were embedded on a Field Gate Programmable Gate Array (FPGA) hardware platform. The implementations were carried out by Simulink models and hardware synthesizable blocks from DSP Builder software and the results are shown in the form of the models and the boolean functions implemented by them.     

基于改进粒子群算法的配网电容器优化配置

随着国民经济发展,配电网规模不断扩大。依照经验配置电容器的局限性日益显著,具体表现为电容器容量配置的不足或过剩,部分电容器需要时由于局部电压的限制而不能投入。将模拟退火粒子群算法用于解决配电网电容器优化配置问题,建立了相应的数学模型,目标函数为配电网有功网损费用、电容器的购置及安装总费用最小,该算法将电容器的安装位置及安装容量离散化,采用基于适应度值的动态阈值来控制实施局部搜索的粒子数目,来改善算法摆脱局部极值点的能力,提高算法的收敛速度和精度。对一个33节点配电网的电容器优化配置结果表明了模拟退火粒子群算法的合理性和优越性。     

Microstructure evolution during the co-sintering of Ni/BaTiO3 multilayer ceramic capacitors modeled by discrete element simulations

Electrode discontinuities are a critical issue for manufacturing ultrathin multilayer ceramic capacitors (MLCCs). The Discrete Element Method is used to simulate, at the particle length scale, the microstructure evolution during the co-sintering of state-of-the-art nickel based-MLCCs. Electrode discontinuities are considered to originate from the heterogeneities in the initial powder packing and to grow because of the constraint imposed by adjacent dielectric layers. A parametric study demonstrates that: (i) fast heating rate leads to lower electrode discontinuity during heating, (ii) green density and thickness of the electrode should be optimized to improve the electrode connectivity, (iii) rearrangement of the nickel particles plays a significant role in electrode discontinuity, and (iv) the addition of non-sintering inclusions can improve the electrode connectivity. These findings can be generalized to other multilayer components.     

双电层电容器用中微双孔活性炭的研究进展

文章介绍了中微双孔活性炭的制备方法,综述了用作双电层电容器的最新应用研究,为中微双孔活性炭在双电层电容器中的应用提供参考。     

淀粉模板法辅助合成二氧化锰纳米棒及其电容特性研究

以淀粉为模板,结合浸渍-煅烧法合成了MnO2纳米棒,对产物晶型结构、形貌大小和电容特性等进行表征。测试结果表明所得样品为α-MnO2纳米棒,其平均直径为20 nm左右,平均长度约为75 nm。在1.0 mol/L的Na2SO4电解液中,01.0V电位区间内,充放电电流为2.0、5.0、10.0 mA时,所制备的α-MnO2放电比电容分别达到了186、120、90 F/g。2 mA恒流充放电1 000次后,MnO2的放电比容量保持率为91%。     

美国CDE公司表面安装(SMT)电容及其应用选型

文章简要介绍了美国CDE公司表面安装电容的分类和特点，并详细讨论了ESRD和ESRE系列电容的结构和机理，最后向读者推荐了不同应用时表贴电容的选型参考。     

并联电容器装置保护用氧化锌避雷器的选型问题

从我国电力系统实际情况出发 ,结合避雷器选型的历史回顾和新版本的避雷器国家标准 ,提出了使电力系统安全、可靠运行的并联电容器装置用氧化锌避雷器的选型方法 ,对变电站中并联电容器装置的设计具有一定的参考价值     

电化学电容器及其研究进展

电化学电容器是近年发展的一种新型能量储存装置,本文介绍电化学电容器储存电能的原理、特点及应用,并简要评述了以碳材料、贵金属氧化物及导电聚合物做为电化学电容器电极材料的研究进展.     

GFD—360型涂层钢板焊接设备及工艺的开发

本文介绍了本课题组研制、开发成功的GFD－360型涂层钢板，专用点焊机的机械部分、主回路电气、微机控制等原理及其焊接工艺规范。     

阳极铝箔交流腐蚀发孔对比容的影响

采用５０Ｈｚ交流电腐蚀发孔和进一步腐蚀阳极铝箔，在腐蚀箔表面形成透明钝化型腐蚀膜且蚀孔孔径较大。在交流电腐蚀过程中不产生发黑、掉粉和减薄现象。另外，该工艺对盐酸浓度和硫酸添加剂浓度的适应范围很宽。