集团变分法(CVM)及其在合金相图计算中的应用

介绍了集团变分法的集团概率变量、配置熵等统计分析的理论基础及Helmholtz自由能的描述模型.提出了巨势及相对化学势的几何分析理论.讨论了应用集团变分法和巨势分析理论进行相平衡计算的过程,并分析了同结构平衡相图计算的若干实例.     

The influence of various reaction parameters on the performance of (α‐diimine)nickel(II) catalysts in ethylene oligomerization reactions

Modified (α‐diimine)nickel(II) catalysts are suitable for ethylene oligomerization reactions. Due to the mechanism (“chain running”), the formation of double‐bond isomers and branched olefins can be observed. The obtained oligomer mixtures show a Schulz–Flory distribution. Increasing ethylene pressure favors the selectivity of α‐olefin formation. The same effect can be observed when Lewis bases like thiophene or furane are added to the oligomerization reaction mixture. These results can be related to an interaction of the additives with the catalytic active species during the oligomerization process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1356–1361, 2003     

小浪底水库坝前漏斗区泥沙测验分析

小浪底水库坝前漏斗区的形成和发展,直接影响到枢纽建筑物的安全运行。为了保持塔前“门前清,”掌握坝前漏斗区的形成和发展,保证水库进入拦沙后期和正常运用期的正常运用,对坝前漏斗区进行了泥沙测验分析。结果表明:目前漏斗区范围内纵向坡度较缓,尚没有明显的漏斗形成,仅在坝前和塔前200m×1000m范围形成了漏斗雏形。     

高吸水性树脂吸水率测定条件的研究

通过自然过滤法在不同条件下测定了淀粉接枝丙烯酸高吸水性树脂的吸水率，实验给出了该方法测定吸水率的最佳条件，即：滤袋网孔尺寸为0.180～0．280mm，树脂质量约0．3g，加水量约500mL，吸水时间≥2h，沥水时间≥50min。     

复杂断块油藏二氧化碳吞吐研究与应用

通过对胜利油田东辛原油与二氧化碳的最小混相压力的预测及适应性研究,结合初期的矿场试验制定东辛油区选井条件。同时,依据室内实验和气体状态方程计算注入量,优化施工参数,并对工艺效果进行经济评价。目前施工16口18井次,措施成功率82.8％,累增油20 972t,投入产出比1:6.01,该工艺对提高封闭小断块油藏采收率起到了一定的作用。     

彩色多频同步显示器行激励级电路的倒推设计法（1）

行激励级电路的设计是完全为行输出级服务的,它实质上是行输出级电路设计的一个重要而不可分割的组成部分。因此行激励级电路的设计,自然采用了从显象管偏转线圈和行输出管到激励变压器和行激励级的倒推设计法。     

DLL23XA双侧向测井仪的研制

以往双侧向测井仪动态范围小，测量精度低，为此开发了DLL23XA双侧向测井仪。该仪器主要单元采用厚膜电路，稳定性、一致性好；深、浅屏流源采用可变功率控制，提高了仪器的动态范围。仪器采用3506P例进行数据传输，可方便地配接各种地面系统。     

Appraisal as a Pervasive Determinant of Anger.

L. Berkowitz and E. Harmon-Jones (see record 2004-15096-001) challenge appraisal theories of emotion by describing 2 sets of conditions (physical discomfort and anger-related muscle actions) in which anger appears to be elicited in the absence of theoretically predicted appraisals. In response, the authors discuss the ability of the specific appraisal model they have developed (e.g., C. A. Smith & L. D. Kirby, 2000, 2001; C. A. Smith & R. S. Lazarus, 1990) to account for such instances of anger. First, a number of issues are clarified relevant to the authors' model, including the nature of both the cognitive operations underlying appraisal and the specific appraisals hypothesized to evoke anger. The authors then describe how their model can account for the instances of anger described by L. Berkowitz and E. Harmon-Jones and how both accounts might be tested. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

动态不确定多输入多输出系统的变结构鲁棒控制

本文仅利用输入输出数据给出了一种动态不确定多输入多输出系统的变结构控制器设计机制，控制系统的设计中引入了一个严格正实的模型．应用适当逻辑切换的状态变量滤波器实现变结构控制．证明了所提方案能保证全局输出有界稳定并能实现滑模控制和渐近跟踪参考模型的输出．该设计方案对结构不确定性具有一定的鲁棒性．仿真结果表明了所提方案的有效性．     

Energy and comfort: A new type for TRNSYS

Two subroutines have been developed which permit users of the TRNSYS programme to calculate the parameters of ambiental comfort (PMV and PPD).The first subroutine deals with the calculation of the view factors inside a room for all the values of the spatial coordinates and, thus, permits the average radiant temperature to be calculated in every position. The second subroutine has been developed in accordance with the indications of the ISO 7730 standard.Both subroutines have been validated and then interfaced to TRNSYS.The integrated programme has been utilised to compare the performances of different heating systems in terms of energy consumption and comfort, maintaining the temperature of the interior constant for different climatic conditions.